(1,75x speed, flickering from camera recording)
- Displays current price and candle chart in realtime using websockets
- Tiny form factor with an ESP8266 ESP-01S WiFi Module and a SSD1306 OLED display
- Based on PlatformIO for dependency management, compilation and flashing of binaries
- Arduino framework
- ESP8266 ESP-01S WiFi Module
- OLED Display SSD1306 128ร64
- Programmer for the ESP8266 (I used a USB to Serial Converter)
image sources:
- https://www.instructables.com/ESP-01-Module-Programming-Board/
- https://pdacontrolen.com/esp8266-display-oled-i2c-client-irc/
Make sure PlatformIO is installed (see also the PlatformIO documentation):
$ pip install -U platformio
Set the WiFi parameters in config.h
, then compile the project and create the firmware:
$ pio run
Put the ESP8266 in programming mode and flash the device with
$ pio run -t upload
To the extent possible under law,
Jan Sturm
has waived all copyright and related or neighboring rights to
BTC ticker.
This work is published from:
Germany.