anygo / onyx-vj Goto Github PK

i doesn't use it, because  my mac don't recognize this soft. sorry for my
english...

Thanks for your help. Your soft onyx is very great!!!

mixfile saved settings don't always persist across sessions (like A vs B layer, 
clip speed or whatever).

Hi Daniel, Congratulations on proof beyond concept! One thing I am having
issue with is the Pixel font used is popping up error messages everytiime I
try to manipulate a dropdown or other button. I am using the MAC version of
Onyx.

happens when the flv file have no or few keyframes

ContentFLV should listen to NetStream.Seek.InvalidTime and seek to loopstart

What steps will reproduce the problem?
1. Open the program the window is fixed to the top left of the screen
2.
3.

What is the expected output? What do you see instead?
I'm not sure if that's just the way it is originally but my point that the 
program runs a lower resolution than the computer i'm using and the window is 
fixed and fullscreen rather than being a floating window, it makes it hard to 
navigate between windows especially during live performances.


What version of the product are you using? On what operating system?
4.4 on windows 7

Please provide any additional information below.

What steps will reproduce the problem?
1.  Load a TempoFilter
2.  There are controls displayed that are useless unless it is using a
delay rather than snapped to a beat.

There should be a way where only relevant controls are shown, depending on
the value of another control.

i would love to be able to use my triple-head and three projectors effectively 
and would really appreciate a SIMPLE way to have more than a 4:3 aspect ratio. 
(max resolution 3072x768) currently i usually change settings.xml and nvidia 
control panel and restart onyx - but then it is all simply stretched. i think 
this is probably a very challenging issue, but one where i would rejoice were 
it to be resolved somehow.

Apply the filter to the master layer
Attempt to move the upper left corner down and to the right. 

Ubuntu 10.4
onyxbounds.air

What version of the product are you using? On what operating system?
Onyx 3.0.3.08 [MAC]

4.3.0 (ubuntu 10.10)
VPCONTENTQUERY ASSET ERROR: ERROR #2124

I can see the clips and the videopong folder, but cannot download them...

onyx renders the sound in the clips, and i think that that should be turned off 
because it is a waste of processing power

keyboard & mouse lock -> i hate those people who think that anybody can be a VJ 
and to prove it actually play with my keyboard while i am getting a drink. 
maybe a little Mouse-Jail, which when you put the mouse on the jail and press 
something like ctrl-shift-alt-tab, onyx accepts no keyboard, mouse or midi 
input... until you move the mouse back to the jail and press the same 
key-combination

onyx air windows version crashes if a 2861 usb video device is put on any of 
5 channels.. the only way is bypassing it thru splitcam.
in my case the device is Empire iGrab Pro.

What steps will reproduce the problem?
1. start onyx
2. select cameras as source
3. drag and drop hauppage pvr to one of the slots

What is the expected output? What do you see instead?
I would expect to get real time video.
I get an error:
ArgumentError: Error #1063: Argument count mismatch on
onyx.content::ContentCamera$iinit(). Expected 4, got 3.
    at onyx.layer::Layer/::_onContentStatus()
    at
flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunctio
n()
    at flash.events::EventDispatcher/dispatchEvent()
    at onyx.content::ContentLoader/::_dispatchContent()
    at onyx.content::ContentLoader/load()
    at onyx.layer::Layer/load()
    at ui.layer::UILayer/load()
    at ui.window::Browser/::_onDragDrop()
    at
flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunctio
n()
    at flash.events::EventDispatcher/dispatchEvent()
    at ui.core::DragManager$/::_onObjectUp()

What version of the product are you using? On what operating system?
Onyx 3.0.25, on  WinXP sp2, flash player 9 


Please provide any additional information below.
Same happens with a Creative WebCAM
ArgumentError: Error #1063: Argument count mismatch on
onyx.content::ContentCamera$iinit(). Expected 4, got 3.
    at onyx.layer::Layer/::_onContentStatus()
    at
flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunctio
n()
    at flash.events::EventDispatcher/dispatchEvent()
    at onyx.content::ContentLoader/::_dispatchContent()
    at onyx.content::ContentLoader/load()
    at onyx.layer::Layer/load()
    at ui.layer::UILayer/load()
    at ui.window::Browser/::_onDragDrop()
    at
flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunctio
n()
    at flash.events::EventDispatcher/dispatchEvent()
    at ui.core::DragManager$/::_onObjectUp()


I'm an onyx newbie, don't know much about actionscript and am marvelled by
the design and look&feel of your software.

What steps will reproduce the problem?
1. Click the console
2. Type help

What is the expected output? What do you see instead?

Help output should be displayed.  It is sometimes, other times not.

mic sound generators wont work

Would be nice if the channel screens could be also on top steadily like the 
recorder tab if it overlays a layer or another interface element .

MetaData.duration is sometime a bit too long (overestimated by the encoder
?) _loopEnd is then unreachable

ContentFLV should listen to NetStream.Play.Stop to loop correctly

it would be great to create a patch that reads out the average color of the 
output screen and uses this to control lighting systems commonly found at 
medium to large venues.
i imagine a DMX controller similar to the sound control system or as a filter.
any ideas?

What steps will reproduce the problem?
1. Flex Builder 3
2. Run Main
3. Errors: 1172: Definition onyx.api could not be found.

What is the expected output? What do you see instead?
if i comment out "line26: import onyx.api.*;", it will run but file browser 
doesn't work.

What version of the product are you using? On what operating system?
Onyx-VJ 4.0.0
Windows Vista Ultimate Sp1 (32bits)
C2Q 9300, ICH9, 8GB DDR2 800
Flex Builder 3

Please provide any additional information below.
before 12/1/2009: everything seems work fine.
12/1/2009 svn update: this error comes out.

What steps will reproduce the problem?
1.  Change contrast to 0 and threshold to 1
2.  Onyx will become unusable as there is a performance issue that is
chugging the app

What steps will reproduce the problem?

1. Currently a user needs to export movies his/herself.  Flash doesn't even
have a good method for exporting a jpeg-based SWF file from a QT movie.

We should use a version of FFMPEG and contribute to the project to output
AVM2 based swfs

creating thumbnails of FLV files :

a strange bug happen :
sometime the Stream class don't receive the onMetaData event and waits for
it indefinitely

and a strange solution :
asking the Stream class to listen to its connection net_status (doing
nothing with it, just listening)
it looks useless but since then all the onMetaData are correctly received 

playing FLV files fires the onLastSecond event
it's not implemented by default in NetStream, it should be added in the
Stream class 

What steps will reproduce the problem?

1. Projector currently doesn't allow for dual screen format.

Should have a crossfader window to fade between two layer sources

be able to set the current mixfile as a set that is up and running once ONYX 
has passed its runtime tests and is working

i have been asked several times after the gig if my name is ONYX VJ. can i 
please change the splash screen

What steps will reproduce the problem?
1. LayerCopy / LoopMachine currently live as files within the video file
structure.  These should be able to be stored in memory and used as layers
whenever needed.

Transitions were broken.  Need to re-implement

What steps will reproduce the problem?
1. download 3.0.3.08 mac beta  (ran it to test, it works fine)
2. download 3.0.6 mac, copy files from that folder into 3.0.3 folder 
overwriting all files as per install 
readme


What is the expected output? What do you see instead?

error #2032
can't load plugins or files,
doesn't do anything

Need to create a dual-display Mac Projector

Displacement filter and Convolve filter do nothing.  They should be removed
or fixed

bounce filter doesn't work perfectly

What steps will reproduce the problem?
1. Load a video and a Tempo Filter
2. Change the setting from GLOBAL to none
3.

What is the expected output? What do you see instead?

Global Filter should turn into a delay-based filter, rather than snap. 
Instead it stays snapped to a tempo.

Please use labels and text to provide additional information.

onyx air windows version crashes if a 2861 usb video device is put on any of 
5 channels.. the only way is bypassing it thru splitcam.
in my case the device is Empire iGrab Pro.