- Description
- Rationale
- Installation
- mbedls as command line tool
- Porting instructions
- Retarget mbed-ls autodetection results
- Mocking new or existing target to custom platform name
- mbed-ls unit testing
- Configure mbed-enabled device to work with your host
- Known issues
mbed-ls
is a Python (2 and 3) module that detects and lists mbed-enabled devices connected to the host computer. It will be delivered as a redistributable Python module (package) and command line tool.
Currently supported operating system:
- Windows 7.
- Ubuntu.
- Linux (generic).
- Mac OS X (Darwin).
- Raspbian Jessie Lite.
When connecting more than one mbed-enabled device to the host computer, it takes time to manually check the platforms' binds:
- Mount point (MSD / disk).
- Virtual serial port (CDC).
- mbed's TargetID and generic platform name.
mbed-ls
provides these points of information for all connected boards at once in a simple console (terminal) output.
mbed-ls module is redistributed via PyPI. We recommend you use the application pip.
Note: Python 2.7.9 onwards include pip
by default, so you may have pip
already.
To install mbed-ls from PyPI use command:
$ pip install mbed-ls --upgrade
Prerequisites: you need to have Python 2.7.x or Python 3.6.x installed on your system.
Note: if your OS is Windows, please follow the installation instructions for the serial port driver.
To install the mbed-ls module:
Clone the mbed-ls repository. The following example uses the GitHub command line tools, but you can do this directly from the website:
$ git clone https://github.com/ARMmbed/mbed-ls.git
Change the directory to the mbed-ls repository directory:
$ cd mbed-ls
Now you are ready to install mbed-ls.
$ python setup.py install
On Linux, if you have a problem with permissions please try to use sudo
:
$ sudo python setup.py install
The above command should install the mbed-ls
Python package (import mbed_lstools
) and mbedls command.
To test if your installation succeeded try the mbedls
command:
$ mbedls
Or use the Python interpreter and import mbed_lstools
:
$ python
Python 2.7.8 (default, Jun 30 2014, 16:03:49) [MSC v.1500 32 bit (Intel)] on win32
Type "help", "copyright", "credits" or "license" for more information.
Generic mbedls API example:
>>> import mbed_lstools
>>> mbeds = mbed_lstools.create()
>>> mbeds
<mbed_lstools.lstools_win7.MbedLsToolsWin7 instance at 0x02F542B0>
>>> mbeds.list_mbeds()
[{'platform_name': 'K64F', 'mount_point': 'E:', 'target_id': '02400203D94B0E7724B7F3CF', 'serial_port': u'COM61'}]
>>> print mbeds
Extended mbedls API example:
>>> import mbed_lstools
>>> m = mbed_lstools.create()
>>> dir(m)
['DEBUG_FLAG',
'ERRORLEVEL_FLAG',
'__doc__',
'__init__',
'__module__',
'__str__',
'debug',
'discover_connected_mbeds',
'err',
'get_connected_mbeds',
'get_dos_devices',
'get_json_data_from_file',
'get_mbed_com_port',
'get_mbed_devices',
'get_mbed_htm_target_id',
'get_mbeds',
'get_mounted_devices',
'get_string',
'iter_keys',
'iter_keys_as_str',
'iter_vals', 'list_mbeds',
'list_mbeds_by_targetid',
'list_mbeds_ext',
'list_platforms',
'list_platforms_ext',
'load_mbed_description',
'manufacture_ids',
'os_supported',
'regbin2str',
'scan_html_line_for_target_id',
'usb_vendor_list',
'winreg']
>>> m.list_platforms()
['LPC1768', 'K64F']
>>> m.list_platforms_ext()
{'K64F': 1, 'LPC1768': 2}
After installation of the mbed-ls package, you can use the mbedls command. It allows you to list all connected mbed-enabled devices and gives you the correct association between your board mount point (disk) and the serial port. TargetID information is also provided for your information.
$ mbedls
+---------------------+-------------------+-------------------+--------------------------------+
|platform_name |mount_point |serial_port |target_id |
+---------------------+-------------------+-------------------+--------------------------------+
|KL25Z |I: |COM89 |02000203240881BBD9F47C43 |
|NUCLEO_F302R8 |E: |COM34 |07050200623B61125D5EF72A |
+---------------------+-------------------+-------------------+--------------------------------+
If you want to use mbedls
in your toolchain, continuous integration or automation script and do not necessarily want to use the Python module mbed_lstools
- this solution is for you.
On some Linux systems, USB mass storage devices are not automatically mounted and do not show up when running mbedls
by default. If you would like to include these not mounted devices in mbedls
output, you can run mbed-ls with the -u
option, such as $ mbedls -u
.
You can export mbedls outputs to JSON format: just use the ---json
switch and dump your file on the screen or redirect to a file. It should help you further automate your processes.
$ mbedls --json
[
{
"mount_point": "E:",
"platform_name": "NUCLEO_L152RE",
"serial_port": "COM9",
"target_id": "07100200860579FAB960EFD7"
},
{
"mount_point": "F:",
"platform_name": null,
"serial_port": "COM5",
"target_id": "A000000001"
},
{
"mount_point": "G:",
"platform_name": "NUCLEO_F302R8",
"serial_port": "COM34",
"target_id": "07050200623B61125D5EF72A"
},
{
"mount_point": "H:",
"platform_name": "LPC1768",
"serial_port": "COM77",
"target_id": "101000000000000000000002F7F18695"
},
{
"mount_point": "I:",
"platform_name": "KL25Z",
"serial_port": "COM89",
"target_id": "02000203240881BBD9F47C43"
}
]
You can help us improve the mbed-ls tools by - for example - committing a new OS port. You can see the list of currently supported OSs in the Description section; if your OS isn't there, you can port it.
For further study please check how Mac OS X (Darwin) was ported in this pull request.
mbed-enabled program is designed for mbed developers and partners who want to clearly identify their products as interoperable mbed Enabled technologies. User facing DAPLink interface connects mbed-enabled device with host computer using USB interface.
Interface chip should in general follow few generic rules to allow proper host detection and compliance with for example mbed test tools. There are listed below:
- Existance of CDC (virtual serial port)
- Must support at all standard baudrates 9600 thru 115200
- Must Support
SendBreak
resulting in target reset sequence - MUst have TargetID embedded in USBID
- Mass Storage Device Class
- Must support programming binary files (copy file on MSD results in target flashing)
- Target flashing should not result in automatic target reset
- Must have
DETAILS.TXT
with DAPlink specification - Must have
mbed.htm
with DAPlink specification mbed.htm
should contain link to platform withTargetID
specified- Must have TargetID embedded in
USBID
Each device must have an unique identifier which generic format is specified in below chapter.
TargetID generic format:
- ASCII string containing hexadecimal values only:
[a-fA-F0-9]{4, }
- Should be longer than four ASCII characters (two bytes of hex data)
- First 2 bytes coded with four ASCII characters are
vendor code
- Note: There might be more than one vendor code value assigned to one vendor.
- Following 2 bytes coded with four ASCII characters are
platform code
* - Rest of ASCII characters are vendor / platform specific. Ignored by mbed-enabled tools
Vendor code
+platform code
should create globally unique value
Example TargetID coding:
- Freescale
K64F
TargetID:0240000033514e450019500585d40008e981000097969900
02 40 000033514e450019500585d40008e981000097969900
| |
| v
v K64F
Freescale
Let's connect a few mbed boards to our Ubuntu host. The devices should mount as MSC and CDC (virtual disk and serial port). We'll use regular Linux commands to see the boards, then see how mbed-ls
displays them.
In this example, we've connected to our Ububtu machine's USB ports:
- 2 x STMicro's Nucleo mbed boards.
- 2 x NXP mbed boards.
- 1 x Freescale Freedom board.
We can see the mounting result in the usb-id directories in Ubuntu's file system under /dev/
. To list mbed boards mounted to serial ports (CDC) via USB, we use the general Linux command:
$ ll /dev/serial/by-id
We'll see:
total 0
drwxr-xr-x root 140 Feb 19 12:38 ./
drwxr-xr-x root 80 Feb 19 12:35 ../
lrwxrwxrwx root 13 Feb 19 12:38 usb-MBED_MBED_CMSIS-DAP_02000203240881BBD9F47C43-if01 -> ../../ttyACM0
lrwxrwxrwx root 13 Feb 19 12:35 usb-MBED_MBED_CMSIS-DAP_A000000001-if01 -> ../../ttyACM4
lrwxrwxrwx root 13 Feb 19 12:35 usb-mbed_Microcontroller_101000000000000000000002F7F18695-if01 -> ../../ttyACM3
lrwxrwxrwx root 13 Feb 19 12:35 usb-STMicroelectronics_STM32_STLink_066EFF525257775087141721-if02 -> ../../ttyACM2
lrwxrwxrwx root 13 Feb 19 12:35 usb-STMicroelectronics_STM32_STLink_066EFF534951775087215736-if02 -> ../../ttyACM1
To list boards mounted to disks (MSC) via USB, we use the general Linux command:
$ ll /dev/disk/by-id
We'll see:
total 0
drwxr-xr-x root 340 Feb 19 12:38 ./
drwxr-xr-x root 120 Feb 19 12:35 ../
lrwxrwxrwx root 9 Dec 3 09:10 ata-HDS728080PLA380_40Y9028LEN_PFDB32S7S44XLM -> ../../sda
lrwxrwxrwx root 10 Dec 3 09:10 ata-HDS728080PLA380_40Y9028LEN_PFDB32S7S44XLM-part1 -> ../../sda1
lrwxrwxrwx root 10 Dec 3 09:10 ata-HDS728080PLA380_40Y9028LEN_PFDB32S7S44XLM-part2 -> ../../sda2
lrwxrwxrwx root 10 Dec 3 09:10 ata-HDS728080PLA380_40Y9028LEN_PFDB32S7S44XLM-part5 -> ../../sda5
lrwxrwxrwx root 9 Dec 3 09:10 ata-TSSTcorpDVD-ROM_TS-H352C -> ../../sr0
lrwxrwxrwx root 9 Feb 19 12:35 usb-MBED_MBED_CMSIS-DAP_A000000001-0:0 -> ../../sdf
lrwxrwxrwx root 9 Feb 19 12:38 usb-MBED_microcontroller_02000203240881BBD9F47C43-0:0 -> ../../sdb
lrwxrwxrwx root 9 Feb 19 12:35 usb-MBED_microcontroller_066EFF525257775087141721-0:0 -> ../../sdd
lrwxrwxrwx root 9 Feb 19 12:35 usb-MBED_microcontroller_066EFF534951775087215736-0:0 -> ../../sdc
lrwxrwxrwx root 9 Dec 3 16:10 usb-MBED_microcontroller_0670FF494956805087154420-0:0 -> ../../sdc
lrwxrwxrwx root 9 Feb 19 12:35 usb-mbed_Microcontroller_101000000000000000000002F7F18695-0:0 -> ../../sde
lrwxrwxrwx root 9 Dec 3 09:10 wwn-0x5000cca30ccffb77 -> ../../sda
lrwxrwxrwx root 10 Dec 3 09:10 wwn-0x5000cca30ccffb77-part1 -> ../../sda1
lrwxrwxrwx root 10 Dec 3 09:10 wwn-0x5000cca30ccffb77-part2 -> ../../sda2
lrwxrwxrwx root 10 Dec 3 09:10 wwn-0x5000cca30ccffb77-part5 -> ../../sda5
Note: mbed-ls
tools pair only serial ports and mount points (not CMSIS-DAP - yet).
We can see that on our host machine (running Ubuntu) there are many 'disk type' devices visible under /dev/disk
. The mbed boards can be distinguished and filtered by their unique USB-ID
conventions. In our case, we can see pairs of usb-ids
in both /dev/serial/usb-id
and /dev/disk/usb-id
with embedded TargetID
. TargetID
can be filtered out, for example using this sudo-regexpr: (“MBED”|”mbed”|”STMicro”)_([a-zA-z_-]+)_([a-zA-Z0-9]){4,}
For example, we can match the board 066EFF525257775087141721 by connecting a few dots:
usb-MBED_microcontroller_066EFF525257775087141721-0:0 -> ../../sdd
usb-STMicroelectronics_STM32_STLink_066EFF525257775087141721-if02 -> ../../ttyACM2
Based on the TargetID hash.
From this we know that the target platform has these properties:
- The unique target platform identifier is
066E
. - The serial port is
ttyACM2
. - The mount point is
sdd
.
Your mbed-ls
implementation resolves those three and creates a “tuple” with those values (for each connected device). Using this tuple(s), mbed-ls
will convert the platform number to a human-readable name etc.
Note that for some boards the TargetID
format is proprietary (see STMicro boards) and usb-id
does not have a valid TargetID where the four first letters are the target platform's unique ID. In that case, mbed-ls
tools inspects the mbed.htm
file on the mbed mounted disk to get the proper TargetID from the URL in the meta
part of the HTML header.
In the following example, the URL http://mbed.org/device/?code=07050200623B61125D5EF72A
for the STMicro Nucleo F302R8 board contains the valid TargetID 07050200623B61125D5EF72A
, which mbed-ls
uses to detect the platform_name
. mbed-ls
will then replace the invalid TargetID in usb-id
with the value from mbed.htm
.
<!-- mbed Microcontroller Website and Authentication Shortcut -->
<!-- Version: 0200 Build: Aug 27 2014 13:29:28 -->
<html>
<head>
<meta http-equiv="refresh" content="0; url=http://mbed.org/device/?code=07050200623B61125D5EF72A"/>
<title>mbed Website Shortcut</title>
</head>
<body></body>
</html>
This is the result of mbedls
listing the connected devices that we saw above:
$ mbedls
+---------------------+-------------------+-------------------+----------------------------------------+
|platform_name |mount_point |serial_port |target_id |
+---------------------+-------------------+-------------------+----------------------------------------+
|KL25Z |I: |COM89 |02000203240881BBD9F47C43 |
|LPC1768 |H: |COM77 |101000000000000000000002F7F18695 |
|NUCLEO_F302R8 |G: |COM34 |07050200623B61125D5EF72A |
|NUCLEO_L152RE |E: |COM9 |07100200860579FAB960EFD7 |
|unknown |F: |COM5 |A000000001 |
+---------------------+-------------------+-------------------+----------------------------------------+
User can create file mbedls.json
in given directory. mbedls.json
file should contain JSON formatted data which will redefine mbed's parameters returned by mbed-ls. mbed-ls
will automatically read mbedls.json
file and alter auto-detection result.
File should be placed in directory where we want to alter mbed-ls behavior.
- Note: This feature in implicitly ON.
- Note: This feature can be turned off with command line switch
--skip-retarget
.
- If file
mbedls.json
exists will be implicitly used to retarget results. - If file
mbedls.json
exists and flag--skip-retarget
is set, there will be no retarget. - If file
mbedls.json
doesn't exist flag--skip-retarget
has no effect.
In this example we will replace serial port name during Freescale's K64F auto-detection:
$ mbedls
+--------------+---------------------+------------+------------+-------------------------------------------------+
|platform_name |platform_name_unique |mount_point |serial_port |target_id |
+--------------+---------------------+------------+------------+-------------------------------------------------+
|K64F |K64F[0] |F: |COM9 |0240022648cb1e77000000000000000000000000b512e3cf |
+--------------+---------------------+------------+------------+-------------------------------------------------+
Our device is detected on port COM9
and MSD is mounted on F:
. We can check more details using --json
switch:
$ mbedls --json
[
{
"mount_point": "F:",
"platform_name": "K64F",
"platform_name_unique": "K64F[0]",
"serial_port": "COM9",
"target_id": "0240022648cb1e77000000000000000000000000b512e3cf",
"target_id_mbed_htm": "0240022648cb1e77000000000000000000000000b512e3cf",
"target_id_usb_id": "0240022648cb1e77000000000000000000000000b512e3cf"
}
]
We must understand that mbed-ls
stores information about mbed devices in dictionaries.
The same information can be presented as dictionary where its keys are target_id
and value is a mbed auto-detection data.
$ mbedls --json-by-target-id
{
"0240022648cb1e77000000000000000000000000b512e3cf": {
"mount_point": "F:",
"platform_name": "K64F",
"platform_name_unique": "K64F[0]",
"serial_port": "COM9",
"target_id": "0240022648cb1e77000000000000000000000000b512e3cf",
"target_id_mbed_htm": "0240022648cb1e77000000000000000000000000b512e3cf",
"target_id_usb_id": "0240022648cb1e77000000000000000000000000b512e3cf"
}
}
Let's say we want change serial_port
's value to other COM port. For example we are using other serial port (e.g. while debugging) on our device as standard output.
To do so we would have to create a new file called mbedls.json
in directory where want to use this modification. File content could look like this: a JSON file where keys are target_id
's and values are dictionaries with new values:
$ cat mbedls.json
{
"0240022648cb1e77000000000000000000000000b512e3cf" : {
"serial_port" : "MyComPort01"
}
}
Now, when we issue mbedls
command in this directory our auto-detection data will be replaced:
$ mbedls
+--------------+---------------------+------------+------------+-------------------------------------------------+
|platform_name |platform_name_unique |mount_point |serial_port |target_id |
+--------------+---------------------+------------+------------+-------------------------------------------------+
|K64F |K64F[0] |F: |MyComPort01 |0240022648cb1e77000000000000000000000000b512e3cf |
+--------------+---------------------+------------+------------+-------------------------------------------------+
Command line switch --mock
provide simple manufacturers ID masking with new platform name.
Users should be able to add temporarily new MID
-> platform_name
mapping when e.g. prototyping.
Mock configuration will be stored in $HOME/.mbed-ls/
directory, in local file .mbedls-mock
.
Note*: MID
stands for "manufacturers ID". MID
is first four (4) characters of target_id
string. Example: If target_id
is 02400221A0811E505D5FE3E8
, corresponding manufacturers ID is 0240
.
- Mock command line parameter:
--mock
or (switch-m
) - Add new / mask existing mapping
MID
->platform_name
and assignMID
:$ mbedls --mock MID:PLATFORM_NAME
or$ mbedls --mock MID1:PLATFORM_NAME1,MID2:PLATFORM_NAME2
- Example:
$ mbedls --mock 0818:NUCLEO_F767ZI
- Remove masking with '!' prefix:
$ mbedls --mock !MID
- Remove all maskings using !* notation:
$ mbedls --mock !*
- Combine above using comma (
,
) separator:$ mbedls --mock MID1:PLATFORM_NAME1,!MID2
Initial setup with 1 x Freescale K64F
board:
$ mbedls
+--------------+---------------------+------------+------------+-------------------------+
|platform_name |platform_name_unique |mount_point |serial_port |target_id |
+--------------+---------------------+------------+------------+-------------------------+
|K64F |K64F[0] |F: |COM146 |02400221A0811E505D5FE3E8 |
+--------------+---------------------+------------+------------+-------------------------+
- We can mask current mapping
0240
->K64F
to something else. For example we can replaceK64F
name with maybe more suitable for us in current setupFRDM-K64F
:
$ mbedls --mock 0240:FRDM_K64F
Current mocking mapping is stored in local file .mbedls-mock
:
$ cat .mbedls-mock
{
"1234": "NEW_PLATFORM_1",
"0240": "FRDM_K64F"
}
We can observe changes immediately. Please note this change only works in the same directory because we save .mbedls-mock
file locally:
$ mbedls
+--------------+---------------------+------------+------------+-------------------------+
|platform_name |platform_name_unique |mount_point |serial_port |target_id |
+--------------+---------------------+------------+------------+-------------------------+
|FRDM_K64F |FRDM_K64F[0] |F: |COM146 |02400221A0811E505D5FE3E8 |
+--------------+---------------------+------------+------------+-------------------------+
- We can remove mapping
1234
-> Anythying using!
wild-card. Note: We are using flag-json
to get JSON format output of the--mock
operation.
$ mbedls --mock !1234 --json
{
"0240": "FRDM_K64F"
}
- We can add multiple mappings at the same time:
$ mbedls --mock 0000:DUMMY,1111:DUMMY_2 --json
{
"1111": "DUMMY_2",
"0240": "FRDM_K64F",
"0000": "DUMMY"
}
- We can remove (
!
) all mappings using*
wildcard:
$ mbedls --mock !*
We can verify our mapping is reset:
$ cat $HOME/.mbed-ls/.mbedls-mock
{}
mbed-ls
package contains basic unit tests.- Tests are stored under
\mbed-ls\test
directory. - Tests cover basic function calls, object construction and check if minimal requirements for OS porting are fulfilled.
- Standard Python’s
unittest
library was used so it is easy to contribute to test effort. To invoke test procedure from command line please change directory to current mbed-ls repo directory and call setup.py with 'test' option.
$ cd mbed-ls
$ python setup.py test
running test
running egg_info
writing requirements to mbed_ls.egg-info\requires.txt
writing mbed_ls.egg-info\PKG-INFO
writing top-level names to mbed_ls.egg-info\top_level.txt
writing dependency_links to mbed_ls.egg-info\dependency_links.txt
writing entry points to mbed_ls.egg-info\entry_points.txt
reading manifest file 'mbed_ls.egg-info\SOURCES.txt'
writing manifest file 'mbed_ls.egg-info\SOURCES.txt'
running build_ext
test_example (test.basic.BasicTestCase) ... ok
test_detect_os_support_ext (test.detect_os.DetectOSTestCase) ... ok
test_porting_create (test.detect_os.DetectOSTestCase) ... ok
test_porting_mbed_lstools_os_info (test.detect_os.DetectOSTestCase) ... ok
test_porting_mbed_os_support (test.detect_os.DetectOSTestCase) ... ok
.
.
.
----------------------------------------------------------------------
Ran 18 tests in 0.302s
OK
We can measure code coverage for unit tests deployed together with mbed-ls
. To do so we can use popular Python coverage
tools.
First install coverage
tool on your system:
$ pip install coverage --upgrade
Next go to mbed-ls
local directory and execute coverage for unit tests:
$ cd mbed-ls
$ coverage run setup.py test
Above command will execute test cases and will grab code coverage numbers. Now we are ready to print code coverage for all tests we've run:
$ coverage report
Name Stmts Miss Cover
-----------------------------------------------------------
mbed_lstools\__init__.py 2 0 100%
mbed_lstools\lstools_base.py 246 169 31%
mbed_lstools\lstools_darwin.py 88 77 13%
mbed_lstools\lstools_linux_generic.py 148 51 66%
mbed_lstools\lstools_ubuntu.py 5 0 100%
mbed_lstools\lstools_win7.py 112 60 46%
mbed_lstools\main.py 90 63 30%
-----------------------------------------------------------
TOTAL 691 420 39%
The mbed serial port works by default on Mac and Linux, but Windows needs a driver. Check here for more details.
While working under Ubuntu/Linux/OSX OSs you will have to mount your mbed-enabled device. You can follow instructions how to do it here.
We recommend you use usbmount
package to auto-mount mbed devices plugged to your host system:
- Install
usbmount
:
$ sudo apt-get install usbmount
- Make copy of
/etc/usbmount/usbmount.conf
:
$ sudo cp /etc/usbmount/usbmount.conf /etc/usbmount/usbmount.conf.bak
- Modify
/etc/usbmount/usbmount.conf
file as follows:
ENABLED=1
MOUNTPOINTS="/media/usb0 /media/usb1 /media/usb2 /media/usb3
/media/usb4 /media/usb5 /media/usb6 /media/usb7
/media/usb8 /media/usb9 /media/usb10 /media/usb11
/media/usb12 /media/usb13 /media/usb14 /media/usb15
/media/usb16 /media/usb17 /media/usb18 /media/usb19"
FILESYSTEMS="vfat ext2 ext3 ext4 hfsplus"
MOUNTOPTIONS="sync,noexec,nodev,noatime,nodiratime"
FS_MOUNTOPTIONS="-fstype=vfat,gid=USERGROUP,uid=USERNAME,dmask=000,fmask=000"
VERBOSE=no
Note: In line:
FS_MOUNTOPTIONS="-fstype=vfat,gid=USERGROUP,uid=USERNAME,dmask=000,fmask=000"
change USERGROUP
and USERNAME
to your user and group names.
You can check user "USERNAME" group by typing:
$ groups USERNAME
This usbmount
configuration will auto-mount your mbed devices without need to type mount
commands each time you plug your mbeds!
For Raspberry Pi you can use LDM: A lightweight device mounter. This should improve stability of your mounts when using mbed-ls on Raspberry Pi. Currently we are using it with Raspbian Jessie Lite.
How to install and use LDM on your Raspberry Pi in three easy steps:
LDM requires additional packages installed (libudev, mount and glib-2.0). You can use below command to check if all requirements are fulfilled:
$ pkg-config --cflags libudev mount glib-2.0
You may need to install additional packages:
$ sudo apt-get install libudev1
$ sudo apt-get install libudev-dev
$ sudo apt-get install libmount-dev
$ sudo apt-get install libglib2.0-dev
Note: You may want to issue $ sudo apt-get update
to make sure that you have access to latest packages via apt-get.
$ git clone [email protected]:LemonBoy/ldm.git
$ cd ldm
$ sudo make install
Add LDM configuration file and configuration itself. Remember to change the your_own_user_name
to valid username.
$ sudo touch /etc/ldm.conf
$ echo 'MOUNT_OWNER=your_own_user_name' >> /etc/ldm.conf
$ echo 'BASE_MOUNTPOINT=/mnt' >> /etc/ldm.conf
$ systemctl status ldm
$ sudo systemctl enable ldm
Now you probably have to safely reboot to make sure changes will take place $sudo shutdown -r now (or sudo reboot)
and enjoy more stable mbed-ls
queries with your Raspberry Pi (Raspbian Jessie Lite).
$ systemctl status ldm
ldm.service - lightweight device mounter
Loaded: loaded (/usr/lib/systemd/system/ldm.service; enabled)
Active: active (running) since Fri 2016-04-29 12:54:23 UTC; 48min ago
Main PID: 389 (ldm)
CGroup: /system.slice/ldm.service
└─389 /usr/bin/ldm -u jenkins -p /mnt
- Users reported issues while using
mbed-ls
on VM (Virtual Machines). - [FIXED in v1.2.0] mbedls fails to list devices on OS X El Capitan.
- [FIXED in v0.2.5]
mbed-ls
doesn't list not mounted devices (Ubuntu/Linux).