annex-engineering / gasherbrum-k3 Goto Github PK
View Code? Open in Web Editor NEWOpen Air or Fully Enclosed, Small Format, Moving Bed, CartesianXY, FDM 3D Printer with Direct Drive Extrusion System
License: Other
Open Air or Fully Enclosed, Small Format, Moving Bed, CartesianXY, FDM 3D Printer with Direct Drive Extrusion System
License: Other
Hey guys,
Can you please move this file:
https://github.com/Annex-Engineering/Gasherbrum-K3/blob/main/STLs/3Z_Drive_Components/common_parts/safety_spring_mount_rear_x1_rev2.stl
To this folder?
https://github.com/Annex-Engineering/Gasherbrum-K3/tree/main/STLs/3Z_Drive_Components/tr12_screw_drive
It's for the screw z
With the removal of the extra adjustment screw on the Y axis endstops in R1.2, the two parts are now identical except for the embossed text. The two parts could be merged into a single file with quantity 2 to reduce stl count.
I had to drill the feet out for my M6 2020 profiles. Can we please get a M6 variation of?
https://github.com/Annex-Engineering/Gasherbrum-K3/blob/main/STLs/Summit_Enclosure/%5Ba%5D_oring_foot_x4_rev1.STL
Hi,
The sourcing guide has yet to have 5x8x1 washers in it. A filter search of "Washer, 5x8x1" in the eDrawing shows 12 such washers common to both configurations, and 12 more for the belt-Z config.
None unique to the screw config.
I hope this is the right place to let the Annex team know!
K3_Front_Door_Engrave_Standard.svg,This file seems incomplete?
A nice-to-have for this mount bed_frame_mount_front would be to have a small recess to allow the heat-set insert to lay down in. And then you can insert a bolt from the back that screws into it cleanly.
Making it a bit easier to pull the heatset insert into the part. As you only have to heat it to pull it in.
With the current design, the wires on the custom silicone heater exit on the left side of the bed and may collide with the purge bucket unless they are bent at a sharp angle. Moving the wires to the right side of the bed (left side in the custom heater drawing) should solve this.
Hi Guys, loving building the printer so far, just waiting on the slow boat from China.
Any idea when the CAD for the printer will be released? I am quite keen to create a hotend mount for my orbiter straight from source if possible. Along with some minor tweaks to suite my needs.
Cheers
Looking for a place I can see the entire build
Hi,
Is file K3 - R1.1 - 2022-11-24.rar broken? If you open the CAD, it is almost empty.
Is there a plan to release the CAD files in Step format or a format that is widely used?
It is a big letdown seeing x_t file format, I believe most of diy community uses step format which can be opened and edited in most of opensource CAD software.
Kindly consider this suggestion, If you really want the design to be mass adopted. Take the hint from Voron, I am not asking for detailed documentation just the CAD
The little humps that fit into the alu extrusion slots are wider than the rest of the K3 parts.
The following parts that I found have the wider hump:
There are two potential issues with the current z axis carriage mounts that could be changed for the R1.2 release.
The rear mount should be lengthened to match the front, otherwise the tensioner sticks out quite a bit.
I realize that if the rear stationary tensioner was taller you could no longer get the screw in for the bearing. Maybe there is no elegant solution for this.
Printed parts with webbing broken off and blended with a file:
Does someone mind updating the renders on the main README with Z belt drive versions?
A couple of issues I've found while printing parts:
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.