The following

mkdir angstrom && cd angstrom
repo init -u git://github.com/Angstrom-distribution/angstrom-manifest
repo sync
MACHINE=cyclone5 . ./setup-environment
bitbake -p

results in

WARNING: /tmp/angstrom-manifest/layers/meta-nslu2/recipes-bsp/apex/apex-nslu2_git.bb: Exception during build_dependencies for do_configure                                                                | ETA:  0:03:30
WARNING: /tmp/angstrom-manifest/layers/meta-nslu2/recipes-bsp/apex/apex-nslu2_1.5.14.bb: Exception during build_dependencies for do_configure
WARNING: /tmp/angstrom-manifest/layers/meta-nslu2/recipes-bsp/apex/apex-nslu2_1.5.14.bb: Error during finalise of /tmp/angstrom-manifest/layers/meta-nslu2/recipes-bsp/apex/apex-nslu2_1.5.14.bb
WARNING: /tmp/angstrom-manifest/layers/meta-nslu2/recipes-bsp/apex/apex-nslu2_git.bb: Error during finalise of /tmp/angstrom-manifest/layers/meta-nslu2/recipes-bsp/apex/apex-nslu2_git.bb
ERROR: ExpansionError during parsing /tmp/angstrom-manifest/layers/meta-nslu2/recipes-bsp/apex/apex-nslu2_1.5.14.bb
Traceback (most recent call last):
bb.data_smart.ExpansionError: Failure expanding variable CMDLINE_CONSOLE, expression was console=${@bb.data.getVar("KERNEL_CONSOLE",d,1) or "ttyS0"} which triggered exception AttributeError: 'module' object has no attribute 'getVar'

WARNING: /tmp/angstrom-manifest/layers/meta-nslu2/recipes-bsp/apex/apex-nslu2-16mb_1.5.14.bb: Exception during build_dependencies for do_configure
WARNING: /tmp/angstrom-manifest/layers/meta-nslu2/recipes-bsp/apex/apex-nslu2-16mb_1.5.14.bb: Error during finalise of /tmp/angstrom-manifest/layers/meta-nslu2/recipes-bsp/apex/apex-nslu2-16mb_1.5.14.bb

Configuration:

Your build environemnt has been configured with:

    MACHINE=cyclone5
    SDKMACHINE=x86_64
    DISTRO=angstrom

You can now run 'bitbake <target>'

Some of common targets are:
    console-image
    systemd-gnome-image
    xfce-nm-image
    development-xfce-image
    development-gnome-image

This also happens with angstrom-v2017.06-yocto2.3

wjh@ubuntu:~/de10-nano-build$ bitbake de10-nano-image
NOTE: Started PRServer with DBfile: /home/wjh/de10-nano-build/cache/prserv.sqlite3, IP: 127.0.0.1, PORT: 59275, PID: 12967
Loading cache: 100% |############################################| Time: 0:00:03
Loaded 4572 entries from dependency cache.
Parsing recipes: 100% |##########################################| Time: 0:00:08
Parsing of 3669 .bb files complete (3661 cached, 8 parsed). 4580 targets, 575 skipped, 0 masked, 0 errors.
WARNING: No bb files matched BBFILE_PATTERN_aarch64 '^/home/wjh/de10-nano-build/layers/meta-linaro/meta-aarch64/'
NOTE: Resolving any missing task queue dependencies

Build Configuration:
BB_VERSION = "1.32.0"
BUILD_SYS = "i686-linux"
NATIVELSBSTRING = "Ubuntu-12.04"
TARGET_SYS = "arm-angstrom-linux-gnueabi"
MACHINE = "de10-nano"
DISTRO = "angstrom"
DISTRO_VERSION = "v2016.12"
TUNE_FEATURES = "arm armv7a vfp thumb neon callconvention-hard"
TARGET_FPU = "hard"
meta-angstrom = "work:9625910bb4bb48b3f4d87a1e9ff3576d40bd656a"
meta-oe
meta-efl
meta-gpe
meta-gnome
meta-xfce
meta-initramfs
meta-multimedia
meta-networking
meta-webserver
meta-ruby
meta-filesystems
meta-perl
meta-python = "work:fe5c83312de11e80b85680ef237f8acb04b4b26e"
meta-qt4 = "work:2c7f8df9039be498f8a2232d1428adb7f4e5e800"
meta-java = "work:6eed0bbfa831f736bbab4d285c57deeec8f5d562"
meta-browser = "work:c3978ffb9a58009d63cb948249bbba7d3411cc4a"
meta-mono = "work:e96e04f81b19e758e5c1ef6df8130871999e115c"
meta-qt5 = "work:81fb771c3f31110e50eebcb004809361fdb28194"
meta-systemd = "work:fe5c83312de11e80b85680ef237f8acb04b4b26e"
meta-ros = "work:6581c77b04495dcc9f5a371a7dc6077638e64c61"
meta-uav = "work:95b5977627853f82b13310c35739b51cf449a1d6"
meta-maker = "work:c039fafa7a0276769d0928d16bdacd2012f2aff6"
meta-kodi = "work:cd09a8badbd258ebf7a5e4d8318b73ca6e15e1ee"
meta-virtualization = "work:1beb18840539f0366b6a5f20bcff98c99534c496"
meta-backports = "work:8844f23ea4e1253c1cddbb8ef0a18e49a953a0dd"
common-bsp = "work:cb5514d39e3efc69f05c23e05ff8ff9e52cc6659"
meta-ti = "work:8457b4359319c50a4dce68afecfced5b367985fb"
meta-freescale = "work:03f977d583e4c6bc116531494079d256419a31f9"
meta-freescale-3rdparty = "work:742fbd6da4a87c4412dbecee42f859e99c9cb614"
meta-altera = "work:cf7fc462cc6a5e82f2de76bb21e09675be7ae316"
meta-de10-nano = "work:840bd62b34cd571cd81670702ca33da62d3b7f46"
meta-nslu2 = "work:df0f6b8337d73c79a0047ba348ebd74e3778a3cf"
meta-htc
meta-nokia
meta-openmoko
meta-palm = "work:32541df3f691fc6c5b6103d5cdb1ee44d4897b5a"
meta-handheld = "work:3bf35a8a1da5b1ef63acd70988fcb89128297d97"
meta-intel = "work:6add41510412ca196efb3e4f949d403a8b6f35d7"
meta-sunxi = "work:318c872680fb095910a4d1c81a596152605c365e"
meta-raspberrypi = "work:17f0c233054791ff21dcaf747f842d901282ae05"
meta-dominion = "work:f6f21bed69179b86cdda54fdec684fda7b305cf8"
meta-atmel = "work:6a22f84388f9c444627e40a08cb89de462cd0a5b"
meta-exynos = "work:d91f975a06e0797340432908fc89a1f1cadc1ee3"
meta-gumstix-community = "work:c8e7ec7f391a4b66adadac090d55beba18e1117e"
meta-qcom = "work:60ed02c2d3b86b8ebb716ed9b36569bc752ce90a"
common = "work:ca682b9801bc04e56acd52a0384ed6bd711834a7"
meta-edison = "work:395c66f21526ee07d963233218e4eaa8d47f32dd"
meta-96boards = "work:fe46223c81553170e47a8c7d7fe045cf19f3e3f1"
meta-chip = "work:ddfd006069216ddcd78d5dcdd3f67ac209a438ab"
meta-linaro
meta-linaro-toolchain
meta-aarch64
meta-optee = "work:992eaa0a1969c2056a5321c122eaa8cd808c1c82"
meta = "work:e3911133ee9aad7cc3ae89faea80a097f6614fab"

Initialising tasks: 100% |#######################################| Time: 0:00:21
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: quilt-native-0.64-r0 do_populate_sysroot: Error executing a python function in exec_python_func() autogenerated:

The stack trace of python calls that resulted in this exception/failure was:
File: 'exec_python_func() autogenerated', lineno: 2, function:
0001:
*** 0002:sstate_task_postfunc(d)
0003:
File: '/home/wjh/de10-nano-build/layers/openembedded-core/meta/classes/sstate.bbclass', lineno: 672, function: sstate_task_postfunc
0668:
0669:python sstate_task_postfunc () {
0670: shared_state = sstate_state_fromvars(d)
0671:
*** 0672: sstate_install(shared_state, d)
0673: for intercept in shared_state['interceptfuncs']:
0674: bb.build.exec_func(intercept, d, (d.getVar("WORKDIR", True),))
0675: omask = os.umask(0o002)
0676: if omask != 0o002:
File: '/home/wjh/de10-nano-build/layers/openembedded-core/meta/classes/sstate.bbclass', lineno: 276, function: sstate_install
0272:
0273: # Run the actual file install
0274: for state in ss['dirs']:
0275: if os.path.exists(state[1]):
*** 0276: oe.path.copyhardlinktree(state[1], state[2])
0277:
0278: for postinst in (d.getVar('SSTATEPOSTINSTFUNCS', True) or '').split():
0279: # All hooks should run in the SSTATE_INSTDIR
0280: bb.build.exec_func(postinst, d, (sstateinst,))
File: '/home/wjh/de10-nano-build/layers/openembedded-core/meta/lib/oe/path.py', lineno: 81, function: copyhardlinktree
0077: if (os.stat(src).st_dev == os.stat(dst).st_dev):
0078: # Need to copy directories only with tar first since cp will error if two
0079: # writers try and create a directory at the same time
0080: cmd = "cd %s; find . -type d -print | tar --xattrs --xattrs-include='' -cf - -C %s -p --no-recursion --files-from - | tar --xattrs --xattrs-include='' -xf - -C %s" % (src, src, dst)
*** 0081: subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT)
0082: source = ''
0083: if os.path.isdir(src):
0084: import glob
0085: if len(glob.glob('%s/.??' % src)) > 0:
File: '/usr/lib/python3.4/subprocess.py', lineno: 617, function: check_output
0613: process.wait()
0614: raise
0615: retcode = process.poll()
0616: if retcode:
*** 0617: raise CalledProcessError(retcode, process.args, output=output)
0618: return output
0619:
0620:
0621:def list2cmdline(seq):
Exception: subprocess.CalledProcessError: Command 'cd /home/wjh/de10-nano-build/build/tmp-angstrom-glibc/work/i686-linux/quilt-native/0.64-r0/sysroot-destdir/home/wjh/de10-nano-build/build/tmp-angstrom-glibc/sysroots/i686-linux; find . -type d -print | tar --xattrs --xattrs-include='' -cf - -C /home/wjh/de10-nano-build/build/tmp-angstrom-glibc/work/i686-linux/quilt-native/0.64-r0/sysroot-destdir/home/wjh/de10-nano-build/build/tmp-angstrom-glibc/sysroots/i686-linux -p --no-recursion --files-from - | tar --xattrs --xattrs-include='*' -xf - -C /home/wjh/de10-nano-build/build/tmp-angstrom-glibc/sysroots/i686-linux' returned non-zero exit status 64

Subprocess output:
tar: unrecognized option '--xattrs'
tar: unrecognized option '--xattrs'
Try tar --help' or tar --usage' for more information.
Try tar --help' or tar --usage' for more information.

ERROR: quilt-native-0.64-r0 do_populate_sysroot: Function failed: sstate_task_postfunc
ERROR: Logfile of failure stored in: /home/wjh/de10-nano-build/build/tmp-angstrom-glibc/work/i686-linux/quilt-native/0.64-r0/temp/log.do_populate_sysroot.13208
ERROR: Task (/home/wjh/de10-nano-build/layers/openembedded-core/meta/recipes-devtools/quilt/quilt-native_0.64.bb:do_populate_sysroot) failed with exit code '1'
NOTE: Tasks Summary: Attempted 8 tasks of which 7 didn't need to be rerun and 1 failed.
NOTE: Writing buildhistory

Summary: 1 task failed:
/home/wjh/de10-nano-build/layers/openembedded-core/meta/recipes-devtools/quilt/quilt-native_0.64.bb:do_populate_sysroot
Summary: There was 1 WARNING message shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.

Hello,
I'm attempting to follow the guide on RocketBoards to build kernal and rootfs for the CycloneV dev kit. When this string is entered:

repo init -u git://github.com/Angstrom-distribution/angstrom-manifest -b angstrom-v2019.06-warrior

followed by: repo sync,

I eventually get this error:

error: Cannot fetch altera-opensource/meta-altera from https://github.com/altera-opensource/meta-altera

Does this mean that meta_altera has been moved? If so, where would it be and how would I point to it in the process of going through the guide?

Thank you!

Tim

I noticed yesterday that my distro, which I forked from angstrom, stopped building. Vanilla Angstrom now has the same problem:

~/Documents/angstrom-manifest$ repo init -u https://github.com/Angstrom-distribution/angstrom-manifest

Traceback (most recent call last):
  File "/home/garrett/Documents/angstrom-manifest/.repo/repo/main.py", line 555, in <module>
    _Main(sys.argv[1:])
  File "/home/garrett/Documents/angstrom-manifest/.repo/repo/main.py", line 530, in _Main
    result = run()
  File "/home/garrett/Documents/angstrom-manifest/.repo/repo/main.py", line 523, in <lambda>
    run = lambda: repo._Run(name, gopts, argv) or 0
  File "/home/garrett/Documents/angstrom-manifest/.repo/repo/main.py", line 212, in _Run
    result = cmd.Execute(copts, cargs)
  File "/home/garrett/Documents/angstrom-manifest/.repo/repo/subcmds/init.py", line 462, in Execute
    self._LinkManifest(opt.manifest_name)
  File "/home/garrett/Documents/angstrom-manifest/.repo/repo/subcmds/init.py", line 314, in _LinkManifest
    self.manifest.Link(name)
  File "/home/garrett/Documents/angstrom-manifest/.repo/repo/manifest_xml.py", line 181, in Link
    self.Override(name)
  File "/home/garrett/Documents/angstrom-manifest/.repo/repo/manifest_xml.py", line 174, in Override
    self._Load()
  File "/home/garrett/Documents/angstrom-manifest/.repo/repo/manifest_xml.py", line 480, in _Load
    self._ParseManifest(nodes)
  File "/home/garrett/Documents/angstrom-manifest/.repo/repo/manifest_xml.py", line 588, in _ParseManifest
    project = self._ParseProject(node)
  File "/home/garrett/Documents/angstrom-manifest/.repo/repo/manifest_xml.py", line 908, in _ParseProject
    self._ParseCopyFile(project, n)
  File "/home/garrett/Documents/angstrom-manifest/.repo/repo/manifest_xml.py", line 1035, in _ParseCopyFile
    self._ValidateFilePaths('copyfile', src, dest)
  File "/home/garrett/Documents/angstrom-manifest/.repo/repo/manifest_xml.py", line 1026, in _ValidateFilePaths
    '<%s> invalid "src": %s: %s' % (element, src, msg))
error.ManifestInvalidPathError: <copyfile> invalid "src": ../../.repo/manifests/setup-environment: bad component: ..

My guess is that the repo tool was updated to enforce the condition listed here: "Copying from paths outside of the project or to paths outside of the repo client is not allowed."

Hi, opkg doesn't work for me. It cannot access the feed servers for some reason.
Also, when I try to access http://www.angstrom-distribution.org/ from my browser, it doesn't work neither (I have a timeout).

Any idea why?

(Angstrom v2014.12)

Thanks ;)

If I do

MACHINE=mymachine source setup-environment

inside my script, which was passed positional parameters, then setup-environment-internal sees the $* and $1 variables set and thinks the positional parameter was passed to setup-environment. So I have to explicitly do

MACHINE=mymachine source setup-environment "."

which I did not have to do with sumo.

Is there an angstrom-v2020.06-dunfell branch missing from this repo (or coming soon) to support building Angstrom 2020.06 from meta-angstrom?

Hello there,

I've installed 'The Angstrom Distribution socfpga ttyS0' v2014.12 for my de-10 nano chipset. It works great, but when I've tried to run opkg update unfortunately all I get is:

'Downloading http://feeds.angstrom-distribution.org/feeds/v2014.12/ipk/...'
'wget: error getting response: Connection reset by peer'

I have no idea what this means. I tried to follow the links up in my browser, but it couldn't resolve the hostname. Did you take your feeds.angstrom server down? Is there a new feed server? What even is a feed server?

Thanks,
Matt

Hi,

When building the console-image or any other image on the rocko branch, I get the following error:
Error: ParseError at layers/meta-backports/core/recipes-connectivity/iproute2/iproute2_4.17.0.bb:1: Could not include required file iproute2.inc

The mentioned file exists: layers/openembedded-core/meta/recipes-connectivity/iproute2/iproute2.inc
When I check the bblayers.conf file, it has the directory layers/openembedded-core/meta for BBLAYERS.

Any idea on why this seems to go wrong?

Kind regards,

Jan

Hi,

I am new to bitbake as well as to angstrom, but I tried the following ...

mkdir angstrom && cd angstrom
repo init -u git://github.com/Angstrom-distribution/angstrom-manifest
repo sync
MACHINE=cyclone5 . ./setup-environment
bitbake world

... and ended up with

ERROR: ParseError at /home/christian/Development/fpga/DE0/angstrom/layers/meta-linaro/meta-linaro/recipes-linaro/images/linaro-image-minimal-initramfs.bb:39: Could not inherit file classes/image_types_uboot.bbclass

Here is the config output:

Your build environemnt has been configured with:

    MACHINE=cyclone5
    SDKMACHINE=x86_64
    DISTRO=angstrom

You can now run 'bitbake <target>'

Some of common targets are:
    console-image
    systemd-gnome-image
    xfce-nm-image
    development-xfce-image
    development-gnome-image

Also bitbake console-image gives me the same error.

From my jenkins logs:

+ MACHINE=beast
+ . ./setup-environment
++ . .repo/manifests/setup-environment-internal
++++ whoami
+++ '[' jenkins = root ']'
+++ OEROOT='/var/lib/jenkins/.jenkins/jobs/Angstrom v2015.06 Angstrom-image builds - manifest/workspace/machine/beast'
+++ cd /var/lib/jenkins/.jenkins/jobs/Angstrom v2015.06 Angstrom-image builds - manifest/workspace/machine/beast
.repo/manifests/setup-environment-internal: line 28: cd: /var/lib/jenkins/.jenkins/jobs/Angstrom: No such file or directory
Build step 'Execute shell' marked build as failure
Collecting metadata...
Metadata collection done.

Looks like it needs to either always use straight quotes or escape it.

Someone mentioned that we should be using 'linkfile' instead of 'copyfile'.

Hi,
I have cloned branch angstrom-manifest and did everything folowing README file for branch yocto2.0. I've met these compile error:

| Making all in po
| make[4]: Entering directory /home/macieja/Documents/angstrom/build/tmp-angstrom_v2015_12-glibc/work/i686-linux/binutils-cross-arm/linaro-2.25-r2015.01/binutils-linaro-2.25.0-2015.01-2/build.i686-linux.arm-angstrom-linux-gnueabi/opcodes/po' | make[4]: *** No rule to make targetall'. Stop.
| make[4]: Leaving directory /home/macieja/Documents/angstrom/build/tmp-angstrom_v2015_12-glibc/work/i686-linux/binutils-cross-arm/linaro-2.25-r2015.01/binutils-linaro-2.25.0-2015.01-2/build.i686-linux.arm-angstrom-linux-gnueabi/opcodes/po' | make[3]: *** [all-recursive] Error 1 | make[3]: Leaving directory/home/macieja/Documents/angstrom/build/tmp-angstrom_v2015_12-glibc/work/i686-linux/binutils-cross-arm/linaro-2.25-r2015.01/binutils-linaro-2.25.0-2015.01-2/build.i686-linux.arm-angstrom-linux-gnueabi/opcodes'
| make[2]: *** [all] Error 2
| make[2]: Leaving directory /home/macieja/Documents/angstrom/build/tmp-angstrom_v2015_12-glibc/work/i686-linux/binutils-cross-arm/linaro-2.25-r2015.01/binutils-linaro-2.25.0-2015.01-2/build.i686-linux.arm-angstrom-linux-gnueabi/opcodes' | make[1]: *** [all-opcodes] Error 2 | make[1]: Leaving directory/home/macieja/Documents/angstrom/build/tmp-angstrom_v2015_12-glibc/work/i686-linux/binutils-cross-arm/linaro-2.25-r2015.01/binutils-linaro-2.25.0-2015.01-2/build.i686-linux.arm-angstrom-linux-gnueabi'
| make: *** [all] Error 2
| ERROR: oe_runmake failed
| ERROR: Function failed: do_compile (log file is located at /home/macieja/Documents/angstrom/build/tmp-angstrom_v2015_12-glibc/work/i686-linux/binutils-cross-arm/linaro-2.25-r2015.01/temp/log.do_compile.25882)
ERROR: Task 737 (/home/macieja/Documents/angstrom/sources/meta-linaro/meta-linaro-toolchain/recipes-devtools/binutils/binutils-cross_linaro-2.25.bb, do_compile) failed with exit code '1'

Any sugestions what i should do with this error?

ERROR: Unable to start bitbake server
ERROR: Last 10 lines of server log for this session (/home/ole2/Projects/angstrom/bitbake-cookerdaemon.log):
  File "/home/ole2/Projects/angstrom/bitbake/lib/bb/data_smart.py", line 436, in DataSmart.expand(s='${@bb.utils.contains("TUNE_FEATURES", "m32", "x86:", "" ,d)}qemuall:${MACHINE}:${@bb.data.getVar(\'FEED_ARCH\', d,1).replace(\'all\',\'noarch\')}', varname='MACHINEOVERRIDES'):
         def expand(self, s, varname = None):
    >        return self.expandWithRefs(s, varname).value
     
  File "/home/ole2/Projects/angstrom/bitbake/lib/bb/data_smart.py", line 426, in DataSmart.expandWithRefs(s='${@bb.utils.contains("TUNE_FEATURES", "m32", "x86:", "" ,d)}qemuall:qemux86-64:${@bb.data.getVar(\'FEED_ARCH\', d,1).replace(\'all\',\'noarch\')}', varname='MACHINEOVERRIDES'):
                 except Exception as exc:
    >                raise ExpansionError(varname, s, exc) from exc
     
bb.data_smart.ExpansionError: Failure expanding variable MACHINEOVERRIDES, expression was ${@bb.utils.contains("TUNE_FEATURES", "m32", "x86:", "" ,d)}qemuall:qemux86-64:${@bb.data.getVar('FEED_ARCH', d,1).replace('all','noarch')} which triggered exception AttributeError: module 'bb.data' has no attribute 'getVar'

ole2@ole2-ThinkPad-P50:~/Projects/angstrom$ uname -a
Linux ole2-ThinkPad-P50 4.8.0-46-generic #49~16.04.1-Ubuntu SMP Fri Mar 31 14:51:03 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux

ole2@ole2-ThinkPad-P50:~/Projects/angstrom$ which bitbake
/home/ole2/Projects/angstrom/bitbake/bin/bitbake

ole2@ole2-ThinkPad-P50:~/Projects/angstrom$ bitbake --version
BitBake Build Tool Core version 1.36.0

ole2@ole2-ThinkPad-P50:~/Projects/angstrom$ ../bin/repo --version
repo version v1.12.37
       (from https://gerrit.googlesource.com/git-repo)
repo launcher version 1.23
       (from /home/ole2/Projects/bin/repo)
git version 2.7.4
Python 2.7.12 (default, Nov 20 2017, 18:23:56) 
[GCC 5.4.0 20160609]

ole2@ole2-ThinkPad-P50:~/Projects/angstrom$ ../bin/repo init -u [email protected]:Angstrom-distribution/angstrom-manifest.git -b angstrom-v2017.12-rocko

trying to build Angstrom based on revision="angstrom-v2017.12-rocko"
but the similar failure is happening with revision="angstrom-v2017.06-yocto2.3"

ole2@ole2-ThinkPad-P50:~/Projects/angstrom$ MACHINE=qemux86-64 bitbake console-image
ERROR: Unable to parse MACHINEOVERRIDES
Traceback (most recent call last):
  File "/home/ole2/Projects/angstrom/bitbake/lib/bb/data_smart.py", line 412, in DataSmart.expandWithRefs(s='${TARGET_OS}:${TRANSLATED_TARGET_ARCH}:build-${BUILD_OS}:pn-${PN}:${MACHINEOVERRIDES}:${DISTROOVERRIDES}:${CLASSOVERRIDE}:forcevariable', varname='OVERRIDES'):
                 try:
    >                s = __expand_var_regexp__.sub(varparse.var_sub, s)
                     try:
  File "/home/ole2/Projects/angstrom/bitbake/lib/bb/data_smart.py", line 111, in VariableParse.var_sub(match=<_sre.SRE_Match object; span=(66, 85), match='${MACHINEOVERRIDES}'>):
                 else:
    >                var = self.d.getVarFlag(key, "_content")
                 self.references.add(key)
  File "/home/ole2/Projects/angstrom/bitbake/lib/bb/data_smart.py", line 794, in DataSmart.getVarFlag(var='MACHINEOVERRIDES', flag='_content', expand=True, noweakdefault=False, parsing=False):
                     cachename = var + "[" + flag + "]"
    >            value = self.expand(value, cachename)
     
  File "/home/ole2/Projects/angstrom/bitbake/lib/bb/data_smart.py", line 436, in DataSmart.expand(s='${@bb.utils.contains("TUNE_FEATURES", "m32", "x86:", "" ,d)}qemuall:${MACHINE}:${@bb.data.getVar(\'FEED_ARCH\', d,1).replace(\'all\',\'noarch\')}', varname='MACHINEOVERRIDES'):
         def expand(self, s, varname = None):
    >        return self.expandWithRefs(s, varname).value
     
  File "/home/ole2/Projects/angstrom/bitbake/lib/bb/data_smart.py", line 426, in DataSmart.expandWithRefs(s='${@bb.utils.contains("TUNE_FEATURES", "m32", "x86:", "" ,d)}qemuall:qemux86-64:${@bb.data.getVar(\'FEED_ARCH\', d,1).replace(\'all\',\'noarch\')}', varname='MACHINEOVERRIDES'):
                 except Exception as exc:
    >                raise ExpansionError(varname, s, exc) from exc
     
bb.data_smart.ExpansionError: Failure expanding variable MACHINEOVERRIDES, expression was ${@bb.utils.contains("TUNE_FEATURES", "m32", "x86:", "" ,d)}qemuall:qemux86-64:${@bb.data.getVar('FEED_ARCH', d,1).replace('all','noarch')} which triggered exception AttributeError: module 'bb.data' has no attribute 'getVar'

but the similar failure is happening with revision="angstrom-v2016.12-yocto2.2"

ole2@ole2-ThinkPad-P50:~/Projects/angstrom$ MACHINE=qemux86-64 bitbake console-image
ERROR: Unable to parse /home/ole2/Projects/angstrom/bitbake/lib/bb/data_smart.py
Traceback (most recent call last):
  File "/home/ole2/Projects/angstrom/bitbake/lib/bb/data_smart.py", line 400, in DataSmart.expandWithRefs(s="${@bb.parse.BBHandler.vars_from_file(d.getVar('FILE'),d)[0] or 'defaultpkgname'}", varname='PN'):
                 except Exception as exc:
    >                raise ExpansionError(varname, s, exc) from exc
     
bb.data_smart.ExpansionError: Failure expanding variable PN, expression was ${@bb.parse.BBHandler.vars_from_file(d.getVar('FILE'),d)[0] or 'defaultpkgname'} which triggered exception TypeError: getVar() missing 1 required positional argument: 'expand'

unfortunately unable to verify if similar failure is happening with revision="angstrom-v2016.06-yocto2.1"
Fetching projects: 97% (37/38) fatal: Couldn't find remote ref refs/heads/master
error: Cannot fetch linux4sam/meta-atmel

Hi,

I have a problem to access the Angstrom repo. I’m using a computer with ubuntu 21.04.

Terminal output:

$ repo --trace init -u https://github.com/Angstrom-distribution/angstrom-manifest -b angstrom-v2018.12-thud
: git --version
Downloading Repo source from https://gerrit.googlesource.com/git-repo
: git init --quiet
: git config remote.origin.url https://gerrit.googlesource.com/git-repo
: git config remote.origin.fetch +refs/heads/:refs/remotes/origin/
: git config --get-regexp url..insteadof
: git fetch --quiet /home/gi/.repo/repo/.git/clone.bundle +refs/heads/:refs/remotes/origin/* +refs/tags/:refs/tags/
: git fetch --quiet --progress origin +refs/heads/:refs/remotes/origin/ +refs/tags/:refs/tags/
: git rev-parse --verify refs/remotes/origin/stable^{commit}
: git describe 8e91248655acf1c8044ed8c1b265b804a99eb07f
: git tag -v v2.21
: git update-ref refs/heads/default v2.21^0
: git config branch.default.remote origin
: git config branch.default.merge refs/heads/stable
: git symbolic-ref HEAD refs/heads/default
: git read-tree --reset -u -v HEAD
: git --version
: /usr/bin/python3 /home/gi/.repo/repo/main.py --repo-dir=/home/gi/.repo --wrapper-version=2.21 --wrapper-path=/home/gi/bin/repo -- --trace init -u https://github.com/Angstrom-distribution/angstrom-manifest -b angstrom-v2018.12-thud
Downloading manifest from https://github.com/Angstrom-distribution/angstrom-manifest
: export GIT_DIR=/home/gi/.repo/manifests.git
: git init 1>| 2>|
: git config --file /home/gi/.repo/manifests.git/config --includes --null --list 1>| 2>|
: git config --file /home/gi/.repo/manifests.git/config --includes --replace-all filter.lfs.smudge git-lfs smudge --skip -- %f 1>| 2>|
: git config --file /home/gi/.repo/manifests.git/config --includes --replace-all filter.lfs.process git-lfs filter-process --skip 1>| 2>|
: git config --file /home/gi/.repo/manifests.git/config --includes --unset-all core.bare 1>| 2>|
: git config --file /home/gi/.repo/manifests.git/config --includes --replace-all remote.origin.url https://github.com/Angstrom-distribution/angstrom-manifest 1>| 2>|
: git config --file /home/gi/.repo/manifests.git/config --includes --replace-all remote.origin.fetch +refs/heads/:refs/remotes/origin/ 1>| 2>|
: export GIT_OBJECT_DIRECTORY=/home/gi/.repo/manifests.git/objects
: export GIT_ALTERNATE_OBJECT_DIRECTORIES=/home/gi/.repo/manifests.git/objects
: git fetch --quiet --progress origin --tags +refs/heads/:refs/remotes/origin/ +refs/heads/angstrom-v2018.12-thud:refs/remotes/origin/angstrom-v2018.12-thud +refs/tags/:refs/tags/ 2>&1
remote: Enumerating objects: 1306, done.
remote: Counting objects: 100% (13/13), done.
remote: Compressing objects: 100% (13/13), done.
remote: Total 1306 (delta 3), reused 3 (delta 0), pack-reused 1293
: git pack-refs --all --prune 1>| 2>|
: git rev-parse --verify refs/remotes/origin/angstrom-v2018.12-thud^0 1>| 2>|

: cd /home/gi/.repo/manifests
: git read-tree --reset -u -v HEAD
: load refs /home/gi/.repo/manifests.git
: git checkout -q f8d04fa --
: git update-ref -d refs/heads/default 1>| 2>|
: scan refs /home/gi/.repo/manifests.git
: scan refs /home/gi/.repo/manifests.git
: git update-ref refs/heads/default f8d04fa 1>| 2>|
: git symbolic-ref HEAD refs/heads/default 1>| 2>|
fatal: manifest 'default.xml' not available
fatal: invalid "src": ../../.repo/manifests/setup-environment: bad component: .repo
: git config --get trace2.eventtarget 1>| 2>|

The last fatal was raised in python module manifest_xml.py line 1386:

is_linkfile = element == ‘linkfile’
msg = cls._CheckLocalPath(src, dir_ok=is_linkfile, cwd_dot_ok=is_linkfile)
if msg:
raise ManifestInvalidPathError( <— Line 1386
‘<%s> invalid “src”: %s: %s’ % (element, src, msg))

It seems that anything with the symlink is wrong. But why?

Regards,
KlaGi

Hi Khem,

I did succefully built and tryng to work with QT5 image and I am unable to calibrate the touch screen.

When I try to install the libts-bin for the angstrom-I am unable to install it on the bbb.

Lastly I did beaglebone# opkg update

I landed up like the below error.

I am stuck with the QT5 image and still unable to calibrate the resistive touch screen.

opkg update
Downloading http://feeds.angstrom-distribution.org/feeds/next/ipk/glibc/armv7at2hf-neon/base/Packages.gz.
wget: server returned error: HTTP/1.1 404 Not Found
Downloading http://feeds.angstrom-distribution.org/feeds/next/ipk/glibc/armv7ahf-neon/base/Packages.gz.
wget: server returned error: HTTP/1.1 404 Not Found
Downloading http://feeds.angstrom-distribution.org/feeds/next/ipk/glibc/armv7at2hf-neon/machine/beaglebone/Packages.gz.
wget: server returned error: HTTP/1.1 404 Not Found
Downloading http://feeds.angstrom-distribution.org/feeds/next/ipk/glibc/armv7at2hf-neon/debug/Packages.gz.
wget: server returned error: HTTP/1.1 404 Not Found
Downloading http://feeds.angstrom-distribution.org/feeds/next/ipk/glibc/armv7ahf-neon/debug/Packages.gz.
wget: server returned error: HTTP/1.1 404 Not Found
Downloading http://feeds.angstrom-distribution.org/feeds/next/ipk/glibc/armv7at2hf-neon/gstreamer/Packages.gz.
wget: server returned error: HTTP/1.1 404 Not Found
Downloading http://feeds.angstrom-distribution.org/feeds/next/ipk/glibc/armv7ahf-neon/gstreamer/Packages.gz.
wget: server returned error: HTTP/1.1 404 Not Found
Downloading http://feeds.angstrom-distribution.org/feeds/next/ipk/glibc/all/Packages.gz.
Updated source 'no-arch'.
Downloading http://feeds.angstrom-distribution.org/feeds/next/ipk/glibc/armv7at2hf-neon/perl/Packages.gz.
wget: server returned error: HTTP/1.1 404 Not Found
Downloading http://feeds.angstrom-distribution.org/feeds/next/ipk/glibc/armv7ahf-neon/perl/Packages.gz.
wget: server returned error: HTTP/1.1 404 Not Found
Downloading http://feeds.angstrom-distribution.org/feeds/next/ipk/glibc/armv7at2hf-neon/python/Packages.gz.
wget: server returned error: HTTP/1.1 404 Not Found
Downloading http://feeds.angstrom-distribution.org/feeds/next/ipk/glibc/armv7ahf-neon/python/Packages.gz.
wget: server returned error: HTTP/1.1 404 Not Found
Collected errors:

• opkg_download_backend: Failed to download http://feeds.angstrom-distribution.org/feeds/next/ipk/glibc/armv7at2hf-neon/base/Packages.gz, wget returned 1.
• opkg_download_backend: Failed to download http://feeds.angstrom-distribution.org/feeds/next/ipk/glibc/armv7ahf-neon/base/Packages.gz, wget returned 1.
• opkg_download_backend: Failed to download http://feeds.angstrom-distribution.org/feeds/next/ipk/glibc/armv7at2hf-neon/machine/beaglebone/Packages.gz, wget.
• opkg_download_backend: Failed to download http://feeds.angstrom-distribution.org/feeds/next/ipk/glibc/armv7at2hf-neon/debug/Packages.gz, wget returned 1.
• opkg_download_backend: Failed to download http://feeds.angstrom-distribution.org/feeds/next/ipk/glibc/armv7ahf-neon/debug/Packages.gz, wget returned 1.
• opkg_download_backend: Failed to download http://feeds.angstrom-distribution.org/feeds/next/ipk/glibc/armv7at2hf-neon/gstreamer/Packages.gz, wget returned.
• opkg_download_backend: Failed to download http://feeds.angstrom-distribution.org/feeds/next/ipk/glibc/armv7ahf-neon/gstreamer/Packages.gz, wget returned 1.
• opkg_download_backend: Failed to download http://feeds.angstrom-distribution.org/feeds/next/ipk/glibc/armv7at2hf-neon/perl/Packages.gz, wget returned 1.
• opkg_download_backend: Failed to download http://feeds.angstrom-distribution.org/feeds/next/ipk/glibc/armv7ahf-neon/perl/Packages.gz, wget returned 1.
• opkg_download_backend: Failed to download http://feeds.angstrom-distribution.org/feeds/next/ipk/glibc/armv7at2hf-neon/python/Packages.gz, wget returned 1.
• opkg_download_backend: Failed to download http://feeds.angstrom-distribution.org/feeds/next/ipk/glibc/armv7ahf-neon/python/Packages.gz, wget returned 1.

Regards,
Gibson

Sorry, python version 3.4.0 or later is required by this version bitbake. However, Clone the manifest or Fetch repositories need only python 2.

If i add a local recipes directory like i used to; repo sync will complain about un-commited changes.

How can i add my local path without breaking the sync?

I used the following commands:

repo init -u git://github.com/Angstrom-distribution/angstrom-manifest -b angstrom-v2017.12-rocko
MACHINE=cyclone5 bitbake console-image

Got the following output:

WARNING: /home/user/cv_angstrom2/layers/meta-edison/recipes-bsp/u-boot/u-boot-edison-fw-utils_2015.10.bb: Unable to get checksum for u-boot-edison-fw-utils SRC_URI entry cyclone5.env: file could not be found
...
WARNING: No recipes available for:
  /home/user/cv_angstrom2/layers/meta-freescale/dynamic-layers/browser-layer/recipes-browser/chromium/chromium-wayland_48.0.2548.0.bbappend
  /home/user/cv_angstrom2/layers/meta-freescale/dynamic-layers/browser-layer/recipes-browser/chromium/chromium_52.0.2743.76.bbappend
  /home/user/cv_angstrom2/layers/meta-beagleboard/common-bsp/recipes-kernel/dtc/dtc_git.bbappend
...
ERROR: Nothing RPROVIDES 'connman-systemd' (but /home/user/cv_angstrom2/layers/meta-angstrom/recipes-images/angstrom/console-image.bb RDEPENDS on or otherwise requires it)
NOTE: Runtime target 'connman-systemd' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['connman-systemd']
ERROR: Required build target 'console-image' has no buildable providers.
Missing or unbuildable dependency chain was: ['console-image', 'connman-systemd']

I am trying to follow this guide for Cyclone5,
https://rocketboards.org/foswiki/Documentation/AngstromOnSoCFPGA_1

I get following error when issued bitbake virtual/bootloader command
ERROR: elfutils-native-0.170-r0 do_compile: oe_runmake failed
.
.
.
ERROR: Task (virtual:native:/home/angstrom-build/layers/openembedded-core/meta/recipes-devtools/elfutils/elfutils_0.170.bb:do_compile) failed with exit code '1'

Host sytem: Ubuntu 16.04
Please help!

Hello,

the angström feed server seem to be offline since 2 days.

wget: can't connect to remote host (23.141.224.193): No route to host

Do you know when they will be available again?

Thank you for your time and consideration.

ERROR: openssl-1.1.1a-r0 do_patch: Error executing a python function in exec_python_func() autogenerated:

The stack trace of python calls that resulted in this exception/failure was:
File: 'exec_python_func() autogenerated', lineno: 2, function:
0001:
*** 0002:extend_recipe_sysroot(d)
0003:
File: '/home/dsemenets/beaglebone/yocto/conf/../layers/openembedded-core/meta/classes/staging.bbclass', lineno: 559, function: extend_recipe_sysroot
0555: bb.note("Installed into sysroot: %s" % str(msg_adding))
0556: bb.note("Skipping as already exists in sysroot: %s" % str(msg_exists))
0557:
0558: for f in fixme:
*** 0559: staging_processfixme(fixme[f], f, recipesysroot, recipesysrootnative, d)
0560:
0561: for p in postinsts:
0562: subprocess.check_output(p, shell=True, stderr=subprocess.STDOUT)
0563:
File: '/home/dsemenets/beaglebone/yocto/conf/../layers/openembedded-core/meta/classes/staging.bbclass', lineno: 174, function: staging_processfixme
0170: for fixmevar in ['COMPONENTS_DIR', 'HOSTTOOLS_DIR', 'PKGDATA_DIR', 'PSEUDO_LOCALSTATEDIR', 'LOGFIFO']:
0171: fixme_path = d.getVar(fixmevar)
0172: cmd += " -e 's:FIXME_%s:%s:g'" % (fixmevar, fixme_path)
0173: bb.debug(2, cmd)
*** 0174: subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT)
0175:
0176:
0177:def staging_populate_sysroot_dir(targetsysroot, nativesysroot, native, d):
0178: import glob
File: '/usr/lib/python3.6/subprocess.py', lineno: 336, function: check_output
0332: # empty string. That is maintained here for backwards compatibility.
0333: kwargs['input'] = '' if kwargs.get('universal_newlines', False) else b''
0334:
0335: return run(popenargs, stdout=PIPE, timeout=timeout, check=True,
*** 0336: **kwargs).stdout
0337:
0338:
0339:class CompletedProcess(object):
0340: """A process that has finished running.
File: '/usr/lib/python3.6/subprocess.py', lineno: 418, function: run
0414: raise
0415: retcode = process.poll()
0416: if check and retcode:
0417: raise CalledProcessError(retcode, process.args,
*** 0418: output=stdout, stderr=stderr)
0419: return CompletedProcess(process.args, retcode, stdout, stderr)
0420:
0421:
0422:def list2cmdline(seq):
Exception: subprocess.CalledProcessError: Command 'sed -e 's:^[^/]/:/home/dsemenets/beaglebone/yocto//tmp-angstrom-glibc/work/armv7at2hf-neon-angstrom-linux-gnueabi/openssl/1.1.1a-r0/recipe-sysroot-native/:g' /home/dsemenets/beaglebone/yocto//tmp-angstrom-glibc/sysroots-components/x86_64/quilt-native/fixmepath | xargs sed -i -e 's:FIXMESTAGINGDIRTARGET:/home/dsemenets/beaglebone/yocto//tmp-angstrom-glibc/work/armv7at2hf-neon-angstrom-linux-gnueabi/openssl/1.1.1a-r0/recipe-sysroot:g; s:FIXMESTAGINGDIRHOST:/home/dsemenets/beaglebone/yocto//tmp-angstrom-glibc/work/armv7at2hf-neon-angstrom-linux-gnueabi/openssl/1.1.1a-r0/recipe-sysroot-native:g' -e 's:FIXME_COMPONENTS_DIR:/home/dsemenets/beaglebone/yocto//tmp-angstrom-glibc/sysroots-components:g' -e 's:FIXME_HOSTTOOLS_DIR:/home/dsemenets/beaglebone/yocto//tmp-angstrom-glibc/hosttools:g' -e 's:FIXME_PKGDATA_DIR:/home/dsemenets/beaglebone/yocto//tmp-angstrom-glibc/pkgdata/beaglebone:g' -e 's:FIXME_PSEUDO_LOCALSTATEDIR:/home/dsemenets/beaglebone/yocto//tmp-angstrom-glibc/work/armv7at2hf-neon-angstrom-linux-gnueabi/openssl/1.1.1a-r0/pseudo/:g' -e 's:FIXME_LOGFIFO:/home/dsemenets/beaglebone/yocto//tmp-angstrom-glibc/work/armv7at2hf-neon-angstrom-linux-gnueabi/openssl/1.1.1a-r0/temp/fifo.26501:g'' returned non-zero exit status 123.

Subprocess output:
sed: can't read /home/dsemenets/beaglebone/yocto//tmp-angstrom-glibc/work/armv7at2hf-neon-angstrom-linux-gnueabi/openssl/1.1.1a-r0/recipe-sysroot-native/usr/bin/quilt: No such file or directory
sed: can't read /home/dsemenets/beaglebone/yocto//tmp-angstrom-glibc/work/armv7at2hf-neon-angstrom-linux-gnueabi/openssl/1.1.1a-r0/recipe-sysroot-native/usr/share/quilt/scripts/remove-trailing-ws: No such file or directory
sed: can't read /home/dsemenets/beaglebone/yocto//tmp-angstrom-glibc/work/armv7at2hf-neon-angstrom-linux-gnueabi/openssl/1.1.1a-r0/recipe-sysroot-native/usr/share/quilt/scripts/patchfns: No such file or directory
sed: can't read /home/dsemenets/beaglebone/yocto//tmp-angstrom-glibc/work/armv7at2hf-neon-angstrom-linux-gnueabi/openssl/1.1.1a-r0/recipe-sysroot-native/usr/share/quilt/scripts/edmail: No such file or directory
sed: can't read /home/dsemenets/beaglebone/yocto//tmp-angstrom-glibc/work/armv7at2hf-neon-angstrom-linux-gnueabi/openssl/1.1.1a-r0/recipe-sysroot-native/usr/share/quilt/scripts/backup-files: No such file or directory
sed: can't read /home/dsemenets/beaglebone/yocto//tmp-angstrom-glibc/work/armv7at2hf-neon-angstrom-linux-gnueabi/openssl/1.1.1a-r0/recipe-sysroot-native/usr/share/quilt/mail: No such file or directory

ERROR: openssl-1.1.1a-r0 do_patch: Command 'sed -e 's:^[^/]*/:/home/dsemenets/beaglebone/yocto//tmp-angstrom-glibc/work/armv7at2hf-neon-angstrom-linux-gnueabi/openssl/1.1.1a-r0/recipe-sysroot-native/:g' /home/dsemenets/beaglebone/yocto//tmp-angstrom-glibc/sysroots-components/x86_64/quilt-native/fixmepath | xargs sed -i -e 's:FIXMESTAGINGDIRTARGET:/home/dsemenets/beaglebone/yocto//tmp-angstrom-glibc/work/armv7at2hf-neon-angstrom-linux-gnueabi/openssl/1.1.1a-r0/recipe-sysroot:g; s:FIXMESTAGINGDIRHOST:/home/dsemenets/beaglebone/yocto//tmp-angstrom-glibc/work/armv7at2hf-neon-angstrom-linux-gnueabi/openssl/1.1.1a-r0/recipe-sysroot-native:g' -e 's:FIXME_COMPONENTS_DIR:/home/dsemenets/beaglebone/yocto//tmp-angstrom-glibc/sysroots-components:g' -e 's:FIXME_HOSTTOOLS_DIR:/home/dsemenets/beaglebone/yocto//tmp-angstrom-glibc/hosttools:g' -e 's:FIXME_PKGDATA_DIR:/home/dsemenets/beaglebone/yocto//tmp-angstrom-glibc/pkgdata/beaglebone:g' -e 's:FIXME_PSEUDO_LOCALSTATEDIR:/home/dsemenets/beaglebone/yocto//tmp-angstrom-glibc/work/armv7at2hf-neon-angstrom-linux-gnueabi/openssl/1.1.1a-r0/pseudo/:g' -e 's:FIXME_LOGFIFO:/home/dsemenets/beaglebone/yocto//tmp-angstrom-glibc/work/armv7at2hf-neon-angstrom-linux-gnueabi/openssl/1.1.1a-r0/temp/fifo.26501:g'' returned non-zero exit status 123.
ERROR: openssl-1.1.1a-r0 do_patch: Function failed: extend_recipe_sysroot
ERROR: Logfile of failure stored in: /home/dsemenets/beaglebone/yocto//tmp-angstrom-glibc/work/armv7at2hf-neon-angstrom-linux-gnueabi/openssl/1.1.1a-r0/temp/log.do_patch.26501
ERROR: Task (/home/dsemenets/beaglebone/yocto/conf/../layers/openembedded-core/meta/recipes-connectivity/openssl/openssl_1.1.1a.bb:do_patch) failed with exit code '1'

It seems sysmocom/meta-telephony got empty.

https://github.com/sysmocom/meta-telephony

The revision of kraj/meta-altera project in the angstrom-v2015.12-yocto2.0 branch specified in the manifest file is from July 6th last year.
Is there any reason not to update it? I'm asking because it is missing the component I would like to use.

The v2015.06 CI loop has been failing for the past few days because 'repo rebase' will update meta-qcom past the locked down revision and drag in Linaro/meta-qcom@eebcbba

I followed the steps written in the below link,
https://github.com/Angstrom-distribution/angstrom-manifest/tree/angstrom-v2015.12-yocto2.0

I landed up with the following issues

NOTE: Resolving any missing task queue dependencies
ERROR: Nothing RPROVIDES 'gnome-keyring' (but /home/gibson/sources/meta-angstrom/recipes-angstrom/packagegroups/packagegroup-gnome.bb RDEPENDS on or otherwise requires it)
ERROR: gnome-keyring was skipped: Recipe is blacklisted: This version conflicts with gcr from oe-core
NOTE: Runtime target 'gnome-keyring' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['gnome-keyring']
NOTE: Runtime target 'packagegroup-gnome' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['packagegroup-gnome', 'gnome-keyring']
ERROR: Required build target 'systemd-gnome-image' has no buildable providers.
Missing or unbuildable dependency chain was: ['systemd-gnome-image', 'packagegroup-gnome', 'gnome-keyring']

Host Distro : Debian 7.x.x and Debian 8.xx 64 bit OS
Machine : Beaglebone Black

Regards,
Gibson

i just fixed a build problem in meta-sunxi so it should be bumped to latest master (8a9c1d688c80f21c28836e7fa3e8f945ca84927b) or, better, use the just-created fido branch

Hi,

I was following this description: https://rocketboards.org/foswiki/Documentation/GSRDCompilingLinux and created a local.conf which includes

MACHINE="cyclone5"
KERNEL_PROVIDER = "linux-altera-ltsi"
KERNEL_TAG = "refs/tags/ACDS18.1_REL_GSRD_PR"
KBRANCH = "socfpga-4.9.78-ltsi"
BB_ENV_EXTRAWHITE="$BB_ENV_EXTRAWHITE KBRANCH KERNEL_TAG UBOOT_TAG KERNEL_PROVIDER"
UBOOT_CONFIG = "cyclone5-socdk"
LINUX_TEST_REPO="http://git.rocketboards.org/linux-test"
IMAGE_FSTYPES += "socfpga-sdimg"

I am also using http://releases.rocketboards.org/release/2018.05/gsrd/src/altera.xml in my .repo/local_manifests/.

I am getting the following errors:

ERROR: ...../angstrom-manifest-2018/layers/meta-linaro/meta-linaro/recipes-linaro/images/linaro-sysroot-alip.bb: Deprecated variable(s) found: "IMAGE_DEPENDS_socfpga-sdimg". Use do_image_<type>[depends] += "<recipe>:<task>" instead
ERROR: ...../angstrom-manifest-2018/layers/meta-linaro/meta-linaro/recipes-linaro/images/linaro-image-toolchain-benchmark.bb: Deprecated variable(s) found: "IMAGE_DEPENDS_socfpga-sdimg". Use do_image_<type>[depends] += "<recipe>:<task>" instead
ERROR: ...../angstrom-manifest-2018/layers/meta-linaro/meta-linaro/recipes-linaro/images/linaro-image-sdk.bb: Deprecated variable(s) found: "IMAGE_DEPENDS_socfpga-sdimg". Use do_image_<type>[depends] += "<recipe>:<task>" instead
ERROR: ...../angstrom-manifest-2018/layers/meta-linaro/meta-linaro/recipes-linaro/images/linaro-image-minimal.bb: Deprecated variable(s) found: "IMAGE_DEPENDS_socfpga-sdimg". Use do_image_<type>[depends] += "<recipe>:<task>" instead
ERROR: ...../angstrom-manifest-2018/layers/meta-linaro/meta-linaro/recipes-linaro/images/linaro-image-minimal-ltp.bb: Deprecated variable(s) found: "IMAGE_DEPENDS_socfpga-sdimg". Use do_image_<type>[depends] += "<recipe>:<task>" instead
ERROR: ...../angstrom-manifest-2018/layers/meta-linaro/meta-linaro/recipes-linaro/images/linaro-image-kvm.bb: Deprecated variable(s) found: "IMAGE_DEPENDS_socfpga-sdimg". Use do_image_<type>[depends] += "<recipe>:<task>" instead
ERROR: ...../angstrom-manifest-2018/layers/meta-linaro/meta-linaro/recipes-linaro/images/linaro-image-lng.bb: Deprecated variable(s) found: "IMAGE_DEPENDS_socfpga-sdimg". Use do_image_<type>[depends] += "<recipe>:<task>" instead
ERROR: ...../angstrom-manifest-2018/layers/meta-linaro/meta-linaro/recipes-linaro/images/linaro-image-lamp.bb: Deprecated variable(s) found: "IMAGE_DEPENDS_socfpga-sdimg". Use do_image_<type>[depends] += "<recipe>:<task>" instead
ERROR: ...../angstrom-manifest-2018/layers/meta-linaro/meta-linaro/recipes-linaro/images/linaro-image-arago.bb: Deprecated variable(s) found: "IMAGE_DEPENDS_socfpga-sdimg". Use do_image_<type>[depends] += "<recipe>:<task>" instead
ERROR: ...../angstrom-manifest-2018/layers/meta-linaro/meta-linaro/recipes-linaro/images/linaro-image-alip.bb: Deprecated variable(s) found: "IMAGE_DEPENDS_socfpga-sdimg". Use do_image_<type>[depends] += "<recipe>:<task>" instead
ERROR: ...../angstrom-manifest-2018/layers/meta-linaro/meta-linaro/recipes-linaro/images/linaro-image-leg-java.bb: Deprecated variable(s) found: "IMAGE_DEPENDS_socfpga-sdimg". Use do_image_<type>[depends] += "<recipe>:<task>" instead

Which seems to be caused by my socfpga-sdimg selection.

Are there incompatibilities between some layers?