alexbelgium / hassio-addons Goto Github PK
View Code? Open in Web Editor NEWMy homeassistant addons
License: MIT License
My homeassistant addons
License: MIT License
Hello All,
When I want start Bitwarden_RS I see this error message:
./run: line 81: /opt/bitwarden_rs: No such file or directory
RPI4 2GB
Home Assistant 2021.1.4
Installation Type | Home Assistant Supervised
Development | false
Supervisor | true
Docker | true
Virtual Environment | false
Python Version | 3.8.7
Operating System Family | Linux
Operating System Version | 5.4.79-v8+
CPU Architecture | aarch64
Timezone | Europe/Amsterdam
Hi @alexbelgium
I've tried to initialize the addon but got the following error
Composer autoloader not found, unable to continue. Check the folder "3rdparty". Running "git submodule update --init" will initialize the git submodule that handles the subfolder "3rdparty".
_ ()
| | ___ _ __
| | / __| | | / \
| | \__ \ | | | () |
|_| |___/ |_| \__/
[cont-init.d] 10-adduser: exited 0.
[cont-init.d] 20-config: executing...
[cont-init.d] 20-config: exited 0.
[cont-init.d] 30-keygen: executing...
Creating possible missing Directories
chmod Files and Directories
chown Directories
chmod/chown .htaccess
using pem keys found in /ssl
[cont-init.d] 30-keygen: exited 0.
[cont-init.d] 40-config: executing...
[cont-init.d] 40-config: exited 0.
[cont-init.d] 50-install: executing...
[cont-init.d] 50-install: exited 0.
[cont-init.d] 51-ocr: executing...
[cont-init.d] 51-ocr: exited 0.
[cont-init.d] 60-memcache: executing...
[cont-init.d] 60-memcache: exited 0.
[cont-init.d] 61-trusted_domains: executing...
[19:15:18] INFO: Currently set trusted domains :
/var/run/s6/etc/cont-init.d/61-trusted_domains: line 13: /data/config/www/nextcloud/occ: Is a directory
[cont-init.d] 61-trusted_domains: exited 126.
[cont-init.d] 70-aliases: executing...
[cont-init.d] 70-aliases: exited 0.
[cont-init.d] 99-custom-files: executing...
[custom-init] no custom files found exiting...
[cont-init.d] 99-custom-files: exited 0.
[cont-init.d] done.
[services.d] starting services
[services.d] done.
Any Idea ?
Hey, I really love these. Is there a chance that you could add Ombi https://ombi.io ? It's a real nice webui that communicates with Sonarr and Radarr. Thanks
In the side panel of the vue UI it used to show the remaining storage of the network disk but after a reinstall it shows only the remaining disk spaces of the internal SD card even though I have specified the IP address of my network disk.
I was wondering why Lidarr was missing from your repository and if you could consider adding it 😃
6a1d8c5 seems is problematic (sorry for the repost as issue, I'm not sure if you get notified for comments on commits).
Even with only setting one trusted domain in the config, the generated config.php is broken as it wraps the domain string in garbage.
This is how it looks with a named domain after a local ip for me:
'trusted_domains' =>
array (
0 => '192.168.1.234:8098',
2 => '{notmyreal.duckdns.org//,/',
3 => '}',
),
Hi, first thanks a lot for all your addons, its really helpful :)
Could you port Mealie as well ?
https://github.com/hay-kot/mealie
It is a Cook recipe organiser, the best one that i found.
Thx a lot !
Hello,
Tried the dev3 build but no luck. Error with database was fixed ;)
-----------------------------------------------------------
Add-on: Portainer
Manage your Docker environment with ease
-----------------------------------------------------------
Add-on version: 2.1.1-dev3
You are running the latest version of this add-on.
System: Debian GNU/Linux 10 (buster) (amd64 / qemux86-64)
Home Assistant Core: 2021.5.4
Home Assistant Supervisor: 2021.04.3
-----------------------------------------------------------
Please, share the above information when looking for help
or support in, e.g., GitHub, forums or the Discord chat.
https://github.com/alexbelgium/hassio-addons
-----------------------------------------------------------
[cont-init.d] 00-banner.sh: exited 0.
[cont-init.d] 01-log-level.sh: executing...
[cont-init.d] 01-log-level.sh: exited 0.
[cont-init.d] 30-nginx.sh: executing...
[cont-init.d] 30-nginx.sh: exited 0.
[cont-init.d] portainer.sh: executing...
[cont-init.d] portainer.sh: exited 0.
[cont-init.d] done.
[services.d] starting services
[services.d] done.
[19:28:17] INFO: Starting Portainer...
[19:28:17] INFO: ... password set to default
[19:28:17] INFO: ... portainer launched
2021/05/17 19:28:17 Instance already has defined endpoints. Skipping the endpoint defined via CLI.
2021/05/17 19:28:17 Instance already has an administrator user defined. Skipping admin password related flags.
2021/05/17 19:28:17 server: Reverse tunnelling enabled
2021/05/17 19:28:17 server: Fingerprint 4d:f3:2cxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxad
2021/05/17 19:28:17 server: Listening on 0.0.0.0:8000...
2021/05/17 19:28:17 Starting Portainer 2.1.1 on 0.0.0.0:9000
2021/05/17 19:28:17 [DEBUG] [chisel, monitoring] [check_interval_seconds: 10.000000] [message: starting tunnel management process]
[21:28:17] INFO: Starting NGinx...
nginx: [emerg] cannot load certificate "/ssl/fullchain.pem": BIO_new_file() failed (SSL: error:02001002:system library:fopen:No such file or directory:fopen('/ssl/fullchain.pem','r') error:2006D080:BIO routines:BIO_new_file:no such file)
[cont-finish.d] executing container finish scripts...
[cont-finish.d] 99-message.sh: executing...
[cont-finish.d] 99-message.sh: exited 0.
[cont-finish.d] done.
[s6-finish] waiting for services.
[s6-finish] sending all processes the TERM signal.
[s6-finish] sending all processes the KILL signal and exiting.
SSL is disabled, default config
ssl: false
certfile: fullchain.pem
keyfile: privkey.pem
password: default
Hi alexbelguim,
thank you for providing the new addon scrutiny :)
I know its a very new addon, but maybe you can help me with this problem.
I get the following error in supervisor:
21-03-02 14:27:42 ERROR (SyncWorker_2) [supervisor.docker.addon] Add-on Scrutiny try to access to blocked device sda1!
If I try to access the Web UI I get only a blank page.
I have only one SSD drive in my Intel NUC.
Do you now how to fix this issue?
Thanks.
Hi,
Thank you again for all the created addons in your repo.
Using many of them :)
But i wonder if you could Photoprism as well?
I tried Piwigo but it lacks support for videos recorded with camera.
Links:
https://docs.photoprism.org/
https://demo.photoprism.org/browse
https://github.com/photoprism/photoprism/
"PhotoPrism is a privately hosted app for browsing, organizing, and sharing your photo collection"
Hi,
Try to install Papermerge on my HA 2021.6.8 in a docker on Debian 64Bit RPi4 but get this error:
21-08-14 17:26:09 ERROR (SyncWorker_4) [supervisor.docker.addon] Can't build db21ed7f/armv7-addon-papermerge:2.0.1: The command '/bin/sh -c apt-get update && apt-get install -y --no-install-recommends jq curl cifs-utils keyutils samba plex && mkdir -p /tmp/bashio && curl -L -f -s "https://github.com/hassio-addons/bashio/archive/v${BASHIO_VERSION}.tar.gz" | tar -xzf - --strip 1 -C /tmp/bashio && mv /tmp/bashio/lib /usr/lib/bashio && ln -s /usr/lib/bashio/bashio /usr/bin/bashio && rm -rf /tmp/bashio' returned a non-zero code: 100
21-08-14 17:26:09 ERROR (SyncWorker_4) [supervisor.docker.addon] Build log:
Step 1/14 : ARG BUILD_FROM
Step 2/14 : ARG BUILD_VERSION
Step 3/14 : ARG BASHIO_VERSION=0.13.1
Step 4/14 : FROM ${BUILD_FROM}
---> 089759a4ba04
Step 5/14 : RUN apt-get update && apt-get install -y --no-install-recommends jq curl cifs-utils keyutils samba plex && mkdir -p /tmp/bashio && curl -L -f -s "https://github.com/hassio-addons/bashio/archive/v${BASHIO_VERSION}.tar.gz" | tar -xzf - --strip 1 -C /tmp/bashio && mv /tmp/bashio/lib /usr/lib/bashio && ln -s /usr/lib/bashio/bashio /usr/bin/bashio && rm -rf /tmp/bashio
---> [Warning] The requested image's platform (linux/arm/v7) does not match the detected host platform (linux/arm64/v8) and no specific platform was requested
---> Running in c9d738e0a7c1
Hit:1 http://ports.ubuntu.com/ubuntu-ports focal InRelease
Get:2 http://ports.ubuntu.com/ubuntu-ports focal-updates InRelease [114 kB]
Err:1 http://ports.ubuntu.com/ubuntu-ports focal InRelease
At least one invalid signature was encountered.
Get:3 http://ports.ubuntu.com/ubuntu-ports focal-backports InRelease [101 kB]
Get:4 http://ports.ubuntu.com/ubuntu-ports focal-security InRelease [114 kB]
Err:2 http://ports.ubuntu.com/ubuntu-ports focal-updates InRelease
At least one invalid signature was encountered.
Err:3 http://ports.ubuntu.com/ubuntu-ports focal-backports InRelease
At least one invalid signature was encountered.
Err:4 http://ports.ubuntu.com/ubuntu-ports focal-security InRelease
At least one invalid signature was encountered.
Fetched 328 kB in 49710d 6h 25min 24s (0 B/s)
Reading package lists...
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://ports.ubuntu.com/ubuntu-ports focal InRelease: At least one invalid signature was encountered.
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://ports.ubuntu.com/ubuntu-ports focal-updates InRelease: At least one invalid signature was encountered.
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://ports.ubuntu.com/ubuntu-ports focal-backports InRelease: At least one invalid signature was encountered.
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://ports.ubuntu.com/ubuntu-ports focal-security InRelease: At least one invalid signature was encountered.
W: Failed to fetch http://ports.ubuntu.com/ubuntu-ports/dists/focal/InRelease At least one invalid signature was encountered.
W: Failed to fetch http://ports.ubuntu.com/ubuntu-ports/dists/focal-updates/InRelease At least one invalid signature was encountered.
W: Failed to fetch http://ports.ubuntu.com/ubuntu-ports/dists/focal-backports/InRelease At least one invalid signature was encountered.
W: Failed to fetch http://ports.ubuntu.com/ubuntu-ports/dists/focal-security/InRelease At least one invalid signature was encountered.
W
: Some index files failed to download. They have been ignored, or old ones used instead.
Reading package lists...
Building dependency tree...
Reading state information...
E: Unable to locate package plex
Removing intermediate container c9d738e0a7c1
Hello,
i love this addon but i would like to use it over Ingress. Should be relatively simple to add but i am no expert with docker.
It would be awesome if you could add this to this addon.
This might help: https://developers.home-assistant.io/docs/add-ons/presentation/#basic-ingress-example-with-nginx
Hi,
Upgrading from 2.6.0 isn't possible
The command '/bin/bash -o pipefail -c apk add --no-cache nginx && if [ "${BUILD_ARCH}" = "aarch64" ]; then ARCH="arm64"; fi && if [ "${BUILD_ARCH}" = "armhf" ]; then ARCH="arm"; fi && if [ "${BUILD_ARCH}" = "armv7" ]; then ARCH="arm"; fi && if [ "${BUILD_ARCH}" = "amd64" ]; then ARCH="amd64"; fi && curl -L -s "https://github.com/portainer/portainer/releases/download/${BUILD_UPSTREAM}/portainer-${BUILD_UPSTREAM}-linux-${ARCH}.tar.gz" | tar zxvf - -C /opt/' returned a non-zero code: 1
version | core-2021.7.1 |
---|---|
installation_type | Home Assistant Supervised |
dev | false |
hassio | true |
docker | true |
virtualenv | false |
python_version | 3.9.5 |
os_name | Linux |
os_version | 4.19.0-17-amd64 |
arch | x86_64 |
timezone | Europe/Paris |
GitHub API | ok |
---|---|
Github API Calls Remaining | 5000 |
Installed Version | 1.13.2 |
Stage | running |
Available Repositories | 919 |
Installed Repositories | 41 |
logged_in | false |
---|---|
can_reach_cert_server | ok |
can_reach_cloud_auth | ok |
can_reach_cloud | ok |
host_os | Debian GNU/Linux 10 (buster) |
---|---|
update_channel | stable |
supervisor_version | supervisor-2021.06.8 |
docker_version | 20.10.7 |
disk_total | 29.9 GB |
disk_used | 9.0 GB |
healthy | true |
supported | true |
supervisor_api | ok |
version_api | ok |
installed_addons | Z-Wave JS to MQTT (0.22.0), Home Assistant Google Drive Backup (0.104.3), AppDaemon 4 (0.6.2), Mosquitto broker (6.0.1), Zigbee2mqtt Edge (edge), Portainer (2.6.0), Node-RED (9.2.0), Terminal & SSH (9.1.3), A better presence (1.2.0), Visual Studio Code (3.5.0), Z-Wave JS (0.1.28), ESPHome (1.19.4) |
dashboards | 1 |
---|---|
resources | 28 |
views | 15 |
mode | storage |
api_endpoint_reachable | ok |
---|
Hi,
Sorry for the second request.
Is it possible to have a webdav server to share files across the internet to for example kodi.
I used this previously to connect and share (synology) with https/ssl
Could you make one out of this perhaps:
https://github.com/hacdias/webdav
https://hub.docker.com/r/bytemark/webdav/
Not sure which is the best one but hacdias is with yaml support etc.
Better support for HASS...
Idea of going through a VPN when downloading at home without using openvpn
Repo : https://github.com/vidurb/docker-transmission-wireguard
Repo : https://hub.docker.com/r/dyonr/qbittorrentvpn/
Repo : https://github.com/binhex/arch-qbittorrentvpn
Hi,
Is it possible to have a port configuration change to qbittorrent.
I tried and editted your config file and on login to qbittorrent on the old webui, it is possible to change all the config option.
But when restart or rebuild this is back to default 6881.
From some private torrents and ISP port 6881 is blocked (range 6881-6999 normally).
So it might be best to use a different port for that.
Please forgive me as I'm assuming the issue I am encountering is user error, but I am unsure how to correct this as I do not fully understand what the Joplin Server HA add-on stops and where the Official Documentation starts.
I am using DuckDNS with Home Assistant. I can access my HA just fine this way. I set the Joplin Server add-on to https://example.duckdns.org/joplin
and set up port-forwarding internally from 22300
to 22300
externally. The official documentation says I need a TLS Reverse Proxy, but it only talks about setting this up via Apache and I'm assuming the Add-On already does this. When I go to Open Web UI
I get Invalid origin: http://sitealpha.duckdns.org:22300
. I have definitely put https
in the config, yet it always opens using http
. When I replace http
with https
I get Error code: SSL_ERROR_RX_RECORD_TOO_LONG
. I've also tried changing the external port to 443
(I can't because DuckDNS is already set up to use this in my router) and 444
I'm honestly not sure how to correct this even after reading the Official Joplin Server
documentation because I do not know where to start with it.
Thank you
I need to upload bigger (than 16MB) file using Filebrowser. How it is possible?
Hey,
Think your latest bashio update might have broken some addons:
21-08-09 21:27:46 INFO (SyncWorker_5) [supervisor.docker.addon] Starting build for db21ed7f/amd64-addon-mealie:0.5.2
21-08-09 21:27:49 ERROR (SyncWorker_5) [supervisor.docker.addon] Can't build db21ed7f/amd64-addon-mealie:0.5.2: The command '/bin/sh -c apk add --no-cache jq curl bash && mkdir -p /tmp/bashio && curl -L -f -s "https://github.com/hassio-addons/bashio/archive/v${BASHIO_VERSION}.tar.gz" | tar -xzf - --strip 1 -C /tmp/bashio && mv /tmp/bashio/lib /usr/lib/bashio && ln -s /usr/lib/bashio/bashio /usr/bin/bashio && rm -rf /tmp/bashio && grep -rl "/app/data" /app | xargs sed -i 's|/app/data|/data|g' && sed -i '1d' /app/mealie/run.sh && cat /app/mealie/run.sh >> /nginx.txt && cat /nginx.txt > /app/mealie/run.sh && chmod +x /app/mealie/run.sh' returned a non-zero code: 127
21-08-09 21:27:49 ERROR (SyncWorker_5) [supervisor.docker.addon] Build log:
Step 1/21 : ARG BUILD_FROM
Step 2/21 : ARG BUILD_VERSION
Step 3/21 : FROM ${BUILD_FROM}
---> 6c1e1a77775e
Step 4/21 : COPY rootfs /
---> Using cache
---> 386192aae4a1
Step 5/21 : ARG BASHIO_VERSION=0.13.1
---> Using cache
---> f93195c13238
Step 6/21 : RUN apk add --no-cache jq curl bash && mkdir -p /tmp/bashio && curl -L -f -s "https://github.com/hassio-addons/bashio/archive/v${BASHIO_VERSION}.tar.gz" | tar -xzf - --strip 1 -C /tmp/bashio && mv /tmp/bashio/lib /usr/lib/bashio && ln -s /usr/lib/bashio/bashio /usr/bin/bashio && rm -rf /tmp/bashio && grep -rl "/app/data" /app | xargs sed -i 's|/app/data|/data|g' && sed -i '1d' /app/mealie/run.sh && cat /app/mealie/run.sh >> /nginx.txt && cat /nginx.txt > /app/mealie/run.sh && chmod +x /app/mealie/run.sh
---> Running in 3f7915a39da1
/bin/sh: 1: apk: not found
Removing intermediate container 3f7915a39da1
During an installation I get the following error message:
Failed to install addon
manifest for hurlenko/filebrowser:2.11.0 not found: manifest unknown: manifest unknown
Is it (easily) possible to change your image so that it picks up the "let's encrypt" certs generated by the HA addon by the same name? (This requires only to change the nginx config to point to /ssl/*pem).
Secondly, could you add a config option to use a DB other than the basic sqlite?
This would require chaning the nextcloud config.php appropriately.
I have been able to do both the above, but of course this is not persistent and once you push a new image I'd have to locally make changes again.
Many thanks for the good work!
Hi,
I have installed Plex NAS according to the instructions. but when I select open web UI and log in with my Plexiglas account the steps to setup the server are not shown. It just goes straight to the web player. In the web player I can't find the server anywhere. Thanks for any help!
Hi, first of all I would like to say my gratitude for you for making this Transmission addons for HA. I've been looking all time, and stumble upon this.
On the issue, I managed to add your repo, install and do some configuration.
However, when I access the Web UI, I got this error:
403: Forbidden
Unauthorized IP Address.
Either disable the IP address whitelist or add your address to it.
If you're editing settings.json, see the 'rpc-whitelist' and 'rpc-whitelist-enabled' entries.
If you're still using ACLs, use a whitelist instead. See the transmission-daemon manpage for details.
Perhaps we need to make some changes settings.json
Any idea how to fix this?
Hi,
I found out when using plex/emby/jellyfish and you use IPTV (m3u file) for those apps its a bit limited.
They point to use https://github.com/xteve-project/xTeVe (xTeve) as a virtual M3u adapter.
Its a M3U Proxy for Plex DVR and Emby Live TV.
Can you perhaps make a addon for this?
Sorry for the many request.
The sed command in /etc at the end of the Dockerfile is not restrictive enough and wrongly replaces files like /gallery/include/config_default.inc.php.
I have the ocr option enabled and the log lists the following error:
ERROR: unable to select packages:
leptonica-1.81.1-r0:
masked in: @community
satisfies: tesseract-ocr-4.1.1-r5[so:liblept.so.5]
tesseract-ocr-4.1.1-r5:
masked in: @community
satisfies: world[tesseract-ocr]
[cont-init.d] 51-ocr: exited 2.
Hi,
Since the update to version 4.7.0.10 of emby I can no longer mount my sdd1 or sde1 disks.
I observe the same behavior on all your addons that I recently updated.
[15:08:23] INFO: Mounting local hdd... [15:08:24] INFO: Local Disks mounting.. sda1, sdb1, sdd1, sde1 [15:08:24] INFO: Mount sda1 [15:08:24] INFO: Success! [15:08:24] INFO: Mount sdb1 [15:08:24] INFO: Success! [15:08:24] INFO: Mount sdd1 mount: permission denied (are you root?) [15:08:24] INFO: Mount sde1 mount: permission denied (are you root?)
I noticed that you changed things in config.json going from this :
], "devices": [ "/dev/ttyUSB0", "/dev/*", "/dev/sda1"
to that :
], "devices": [ "/dev/sda1", "/dev/sda2", "/dev/sdb1", "/dev/sdb2"
Could it be linked?
Thanks in advance.
CloseEvent {isTrusted: true, wasClean: true, code: 1000, reason: "", type: "close", …}
bubbles: false
cancelBubble: false
cancelable: false
code: 1000
composed: false
currentTarget: WebSocket {url: "ws://192.168.178.23:8123/api/hassio_ingress/qG_eJSO51uoHqkxiZzgzi9s5ZeNn5CVxBJH7ymrhW6c/:8123/joal", readyState: 3, bufferedAmount: 0, onerror: null, onopen: ƒ, …}
defaultPrevented: false
eventPhase: 0
isTrusted: true
path: []
reason: ""
returnValue: true
srcElement: WebSocket {url: "ws://192.168.178.23:8123/api/hassio_ingress/qG_eJSO51uoHqkxiZzgzi9s5ZeNn5CVxBJH7ymrhW6c/:8123/joal", readyState: 3, bufferedAmount: 0, onerror: null, onopen: ƒ, …}
target: WebSocket {url: "ws://192.168.178.23:8123/api/hassio_ingress/qG_eJSO51uoHqkxiZzgzi9s5ZeNn5CVxBJH7ymrhW6c/:8123/joal", readyState: 3, bufferedAmount: 0, onerror: null, onopen: ƒ, …}
timeStamp: 148160.58499994688
type: "close"
wasClean: true
__proto__: CloseEvent
Hello,
I was trying to install Nextcloud AddOn but get this error message:
The command '/bin/sh -c apk update' returned a non-zero code: 2
RPI4 2GB
Home Assistant 2021.1.4
Installation Type | Home Assistant Supervised
Development | false
Supervisor | true
Docker | true
Virtual Environment | false
Python Version | 3.8.7
Operating System Family | Linux
Operating System Version | 5.4.79-v8+
CPU Architecture | aarch64
Timezone | Europe/Amsterdam
Could you limit to 2.1.24 as it's the only one working in docker ?
Hi @alexbelgium,
is it possible to add ingress support?
I don't know how difficult it is but it would be nice to access scrutiny from my (sub) domain.
Since scrutiny is not password protected I don't want to add it via panel_iframe
.
Hi!
I would like to use Organizr to index all services. Could you port it to Home Assistant?
Thank you!
hi,
on logs supervisor:
21-08-25 16:17:33 WARNING (MainThread) [supervisor.addons.validate] Add-on have full device access, and selective device access in the configuration. Please report this to the maintainer of Emby NAS
Hi!
I've found out that backup taken by HASS was increased in size dramatically because of Qbittorrent addon.
When backed up, this addon includes not just a configuration, but also container image, which is ~600Mb in size.
Is it possible to do something with this, exclude images? By backup increased 3 times in size...
Hi, I'm a big fan of your addons and have basically all of the -arr family installed through them. Is there any chance you would also branch off a readarr add-on? It's essentially a sonarr but for books/audiobooks. I'll be willing to test if you're wanting, thanks.
Hey, this is an odd request but since HA is on 24/7 I feel as if it's an obvious place to host a teamspeak server.
https://teamspeak.com/en/downloads/
Thanks, no worries if you decide not to as it's a niche use.
Hi Alex,
I use your repository with the addons. Very nice you created so many. Thx
So i wonder if you can bring support to a legacy addon which uses Inadyn for dynamic DNS.
It is still working so far. I use it for updating my own IP with a dynamic dns supported domain i bought.
nalipaz created this but isnt maintaining it anymore:
https://github.com/nalipaz/hassio-addons
Inadyn itself:
https://github.com/troglobit/inadyn
I dont know if it is a combination of multiple tools to use it with HASS or only Inadyn.?
That nalipaz created.
All of a sudden my download speeds are veery slow. When I check if port 50277 is open it is not. Could it be that my iso is blocking that port suddenly? If so what would be the best way to setup openVPN?
Hey @alexbelgium , could you implement the same smb mount method of radarr/sonarr in bazarr?
Thank you!
Hi @alexbelgium,
thanks for his great addon and the recently added ingress support.
I like this addon more and more. Good job!
In my opinion it would also be nice if the user has not to login if he is opening the FileBrwoser by ingress.
This is possible in e.g. the Adguard Addon.
If opening Adguard by the IP+Port then a user+password is requierd (to test it I had to disable ssl and set a port).
It would also be possible to start FileBrowser without authentication. But I don't know if this is a good idea...
Hi,
I found an new docker/app might be interesting in your awesome add-on repo.
WGER is a Self hosted FLOSS fitness/workout, nutrition and weight tracker written with Django.
So for the sporty under us :) can create there own workout etc.
By installing and starting this Addon i get this serror. Might be the port is already used. Any way to change this port?
I am testing your Jackett hassio-addon and, after some upgrades, I noticed that there are multiple unused images left in the system:
Is this normal?
Is it something that could be addressed to automatically delete old images?
Can I manually remove unused images?
P.S.: the same happens for your Sonarr too.
Expected Behavior
[cont-init.d] 92-mounts: executing...
[05:14:47] INFO: Mounting smb share...
[05:14:47] INFO: Network Disks mounting.. //192.168**/pms
[05:14:47] INFO: Mount //192.168**/pms
Creating /storage/storagecifs
[05:14:47] INFO: Success!
[cont-init.d] 92-mounts: exited 0.
Current Behavior
[cont-init.d] 92-mounts: executing...
[05:14:47] INFO: Mounting smb share...
[05:14:47] INFO: Network Disks mounting.. //192.168**/pms
[05:14:47] INFO: Mount //192.168**/pms
Creating /storage/storagecifs
Unable to apply new capability set.
[05:14:47] WARNING: Protection mode is ON. Unable to mount external drives!
[cont-init.d] 92-mounts: exited 0.
Unlike what the log says, the protection mode is disabled.
Possible Solution
As far as I can tell, this problem started appearing with the Core 2021.2.3. Same as with the Samba NAS addon problem you solved by adding a apparmor.txt. My guess would be to add the same file so the mount capability is added to the docker container running qbittorrent.
Steps to Reproduce
Start the addon with a networkdisks set up.
Context (Environment)
Rpi4
Core Version: core-2021.2.3
Supervisor Version: supervisor-2021.02.11
Operating System: Home Assistant OS 5.11
Addon version : 14.3.3.99202101191832-7248-da0b276d5ubuntu18.04.1-ls113
Is this normal behaviour? Every time my homeassistant server reboots xteve reverts back to factory settings and I have to configure everything again…
I just noticed that when you don’t put any credentials in the login fields and select login it just logs you in. This is problematic when you have port 8080 forwarded so you can access the website from outside the local network as that way anyone with your public ip can log in to the webui. Is this an issue with this addon or with QBitTorrent itself?
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.