Can't fix read: bad address even with new SDL2 libraries when opening icsim and controls at the same time about icsim

[zombieCraig]

Ubuntu 18.04 should be plenty new. I also develop on Ubuntu, my current one is 18.04. On a fresh 20.04 I did:
git clone https://github.com/zombieCraig/ICSim
sudo apt install libsdl2-dev libsdl2-image-dev
make
./setup_vcan.sh
./controls vcan0 and ./icsim vcan0
No apparent issues. Can you confirm a similar process?

[OnlyRefat]

Hi @zombieCraig I struggled with ubuntu 18.04 for the last 2 days. Finally, following your direction, the simulator worked like a charm on Ubuntu 20.04. Thanks a lot.

[e-magon]

Hi @zombieCraig I struggled with ubuntu 18.04 for the last 2 days. Finally, following your direction, the simulator worked like a charm on Ubuntu 20.04. Thanks a lot.

I can confirm, trying it on the 20.04 LTE version like you did @zombieCraig works without problems.
I don't know why in Ubuntu 18, even with the latest SDL libraries, the error persisted, but I think I can mark this as resolved.

Thank you!