Using a pid-controlled heater about instrumentino

[yoelk]

Hi Michelle, can you send me your python system description file?
I've also upgraded since then both Instrumentino and Controlino (the sketch
that runs on the Arduino), so you might want to download the new version.

Send me the file and I'll see if I can find something.

Joel

On Mon, Mar 23, 2015 at 10:26 PM, meeschka [email protected] wrote:

Hello again,
I am trying to control a small heating element based on readings from a
thermistor. However, Whenever I try to "set" the heater using methods or
sequences, it runs for about 15-30 seconds and then stops. Likewise,
setting the heating element temperature, or simply turning it off/on
through digital pins by adjusting the sidebar seems to make it think for
15-30 seconds, but no real change... I am using the pid function included
in the instrumentino package, and my thermistors are reading correctly, so
I'm wondering if I'm just not understanding how the pid system works.
If I set the heater in a method, and then run it, how long should it go
for? Until it reaches the desired temperature? Until the system is stopped?
A I missing something obvious about how to use the pid system?
Cheers,
Michelle

—
Reply to this email directly or view it on GitHub
#7.

[meeschka]

Hi Joel,
Part of my problems were resolved with the new Instrumentino and Controlino files. For the rest, I realized it has to do with how I am mapping the fraction output to thermistor values, which are non-linear with respect to resistance. Long story short: I'm going to play around with it for a while, see what I can do, will keep you posted.
Thanks :)
Michelle

[yoelk]

Great!
I'm happy it worked out for you.

On 3/24/15, meeschka [email protected] wrote:

Hi Joel,
Part of my problems were resolved with the new Instrumentino and Controlino
files. For the rest, I realized it has to do with how I am mapping the
fraction output to thermistor values, which are non-linear with respect to
resistance. Long story short: I'm going to play around with it for a while,
see what I can do, will keep you posted.
Thanks :)
Michelle

---

Reply to this email directly or view it on GitHub:
#7 (comment)