Questions on hardware rebuilding on Pynq-Z2 board about pynq-computervision

[sxw228]

And there's another problem.

I set the path .But get an error.What's wrong?

[jackl-xilinx]

Please pip install v1.0 with the ocommand:
sudo -H pip3.6 install --upgrade git+https://github.com/Xilinx/[email protected]

We are in the process of adding support for Pynq-Z2 and will update when it is ready.

[MCdeineMudda]

hi, i'm using the z1 board and when i try to run
"sudo -H pip3.6 install --upgrade git+https://github.com/Xilinx/[email protected]"
i get the error: "sudo: pip3.6: command not found"

can you help me please?

[jackl-xilinx]

The Pynq-Z1 board with image v2.3 installed has pip3 instead of pip3.6. Try running the same command with pip3 and see if that works for you.

[jackl-xilinx]

v2.3 support has been added for Pynq-Z1 and Pynq-Z2 so it should work with the standard pip3 install command. Please give it a try. Rebuild for Pynq-Z2 (and even Pynq-Z1) requires some updates from our end. We'll be updating the instructions for that in the next few days. Thanks.

[jackl-xilinx]

Closing this case since the latest v2.3 support and jupyter notebook updates should solve previous issues. Please let us know if there is anything further. Thanks.