win001 Goto Github PK

24v-to-5v-logic-level-converter

This circuit will convert the 0-20V digital logic of any digital sensor to 0-5V logic. So that you can interface that sensor to your MCU.

4x4_keypad_from_scrach

This is a 4x4 USB HID Keypad application. It consist 0-9,A,B,C,*,# characters and backspace.

7_segment-based-dual-display-hmi

This application has two independent 7-segment display(3-digit display & single-digit display) and indepent user input buttons in single MCU. It display the user input and gives the binery out at gpio of a MCU.

automationwithpython

ble_provisioning

WiFi web server with BLE provisioning

bootloaderprojectstm32

This is the repo for BootLoader Development for STM32 Udemy online course

dmaprogramming

Microcontroller DMA programming Fundamentals to Advanced

esp-web-server

esp8266-with-firebase-write-read-data

fan_control_app

The application adjust the fan speed set by the user. It uses IR for calculating the speed of fan. User can give the data using serial terminal(UART). This application adjust the triggering time of TRIAC by comparing fan actual speed and user seted speed.It uses timers for measuring the fan speed and for triggering the TRIAC.

freertos_102

Covering RTOS major concepts

masteringrtos

Running FreeRTOS on Arduino, STM32F4x and Cortex M based MCUs

mpu_servo

Controlling a servo motor with mpu6050 sensor

oled-display-based-hmi

There are two keys for user to input. Increment and decreament. You can fill an array with any word/character to be displayed on display according to user input. There is a binary output you get on MCU gpios for corresponding array index like array[0] gives 000, array[1] gives 001 and so on and at the same time you get printed value of correcspong array index on display. Components used in this project -> 1. I2C bases ssd1306 OLED display. 2. STM32F103 3. 4 LEDs 5. 2 push buttons Driver for ssd1306 OLED Display -> https://stm32f4-discovery.net/2015/05/library-61-ssd1306-oled-i2c-lcd-for-stm32f4xx/

rtos_serial_terminal_menu

stm32-bootloader

STM32 bootloader example that can jump to 2 apps.

uncycle---a-mobile-app-authentication-based-cycle-lock

A mobile app authentication-based cycle lock. User using a mobile app create an account on Uncycle and complete formalities and get a code(authentication key) to be used for opening the lock of bicycle. User needs to connect the bicycle to their mobile phone’s Bluetooth.

win001

Config files for my GitHub profile.

win001.github.io

ws2812-neopixel

WS2812-Neopixel library for Renesas RA controller