[Bug]: unable to write via modbus (tcp / rtu) about homeassistant-solax-modbus

[matomatusov]

Hi,
@wills106
For writing, it is necessary to send the value 1AD4(hex) or 6868(dec) to the converter to the write single register 06x0000 right from the start and it will be unlocked.
Is this the case in your integration?

[johnnyhero83]

Hi,
@wills106
For writing, it is necessary to send the value 1AD4(hex) or 6868(dec) to the converter to the write single register 06x0000 right from the start and it will be unlocked.
Is this the case in your integration?

Ok, thanks. Can you post some manual for dumnies how to do it? I am using integration but I dont interfere with separate registres nor I dont know where to find them and change them…. So some link to something could help. I tried to search, but not really were sucessful

[wills106]

The button has changed to a select. As you get feedback if it's locked or not.

I am guessing it's showing as locked on your Inverter?

[wills106]

I have updated the Docs in 2024.05.3
Can you close the issue down if that solves the issue.

[johnnyhero83]

The button has changed to a select. As you get feedback if it's locked or not.

I am guessing it's showing as locked on your Inverter?

Thanks. The problem was the field was not responding. It was not possible to call the action “Unlocked”
Not sure if this problem was related to recent issues with integration or not.
But it was not possible to change that field