v3 Support about synology-nas-monitoring

[paswai]

Hi,
could you expand a bit on your explanation? I added the lines after each 'agents = ["192.x.x.x"]'. Did you furthermore change the following?

` [[inputs.snmp.field]]
name = "sysName"
oid = "SNMPv2-MIB::sysName.0"
is_tag = true

[[inputs.snmp.field]]
    name = "sysDescr"
    oid = "SNMPv2-MIB::sysDescr.0"

[[inputs.snmp.field]]
    name = "sysContact"
    oid = "SNMPv2-MIB::sysContact.0"

[[inputs.snmp.field]]
    name = "sysLocation"
    oid = "SNMPv2-MIB::sysLocation.0"

[[inputs.snmp.field]]
    name = "sysUpTime"
    oid = "SNMPv2-MIB::sysUpTime.0"`

If I leave it as is, the following error pops up:

E! [telegraf] Error running agent: could not initialize input inputs.snmp: initializing field sysName: translating: MIB search path: /root/.snmp/mibs:/usr/share/snmp/mibs:/usr/share/snmp/mibs/iana:/usr/share/snmp/mibs/ietf Cannot find module (SNMPv2-MIB): At line 1 in (none)

If I change is to SNMPv3, basically the same error pops up (Cannot find module (SNMPv3-MIB): At line 1 in (none)).

Best Regards

Update:
#6

[DeastinY]

Hi, sorry this is no longer running on my side :/
good luck though!