Multiple LD2450s on one ESP? about esphome-ld2450

[uncle-yura]

I have not checked how such a configuration works on hardware, but I think it is possible.
You can add a separate UART port and make a complete duplicate of the configuration for the second sensor.
Something like this:

uart:
  - id: uart_bus_1
    tx_pin: 
      number: GPIO1
    rx_pin: 
      number: GPIO3
    baud_rate: 256000
    parity: NONE
    stop_bits: 1

  - id: uart_bus_2
    tx_pin: 
      number: uart_2_tx_pin
    rx_pin: 
      number: uart_2_rx_pin
    baud_rate: 256000
    parity: NONE
    stop_bits: 1

ld2450:
  - uart_id: uart_bus_1
    id: ld2450_1
    update_interval: 100ms
    invert_y: true
    invert_x: true

  - uart_id: uart_bus_2
    id: ld2450_2
    update_interval: 100ms
    invert_y: true
    invert_x: true

binary_sensor:
  - platform: ld2450
    ld2450_id: ld2450_1
    has_target:
      name: Presence
    has_moving_target:
      name: Moving Target
    has_still_target:
      name: Still Target