Comments (3)
Haven't been able to reproduce your error, but you shouldn't be using sudo
to install using pipx
. If that doesn't work, can you provide more information about the steps you followed
from autorecon.
Pretty much I did a copy paste of the commands on the site. Only thing I really did different was:
- When running "sudo apt install python3-pip", had to run sudo apt update to find the package
- Re-ran "python3 -m pip install --user pipx" after ensure paths just to validate paths were correct.
- At the end when trying to install via pipx, the command couldn't be found, so I installed pipx.
I am using the latest ova from the site as well... Also, I didn't have any issue installing this on my mac, not sure if that matters, but I am using vmware workstation 15 on windows 10 2004 Build...
Command History:
kali@kali:~$ sudo apt install python3
We trust you have received the usual lecture from the local System
Administrator. It usually boils down to these three things:
#1) Respect the privacy of others.
#2) Think before you type.
#3) With great power comes great responsibility.
[sudo] password for kali:
Reading package lists... Done
Building dependency tree
Reading state information... Done
python3 is already the newest version (3.8.2-3).
python3 set to manually installed.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
kali@kali:~$ sudo apt install python3-pip
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package python3-pip is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'python3-pip' has no installation candidate
kali@kali:$ sudo apt update$ sudo apt install python3-pip
Get:1 http://kali.download/kali kali-rolling InRelease [30.5 kB]
Get:2 http://kali.download/kali kali-rolling/main amd64 Packages [16.6 MB]
Get:3 http://kali.download/kali kali-rolling/contrib amd64 Packages [100 kB]
Get:4 http://kali.download/kali kali-rolling/non-free amd64 Packages [199 kB]
Fetched 16.9 MB in 2s (8,177 kB/s)
Reading package lists... Done
Building dependency tree
Reading state information... Done
562 packages can be upgraded. Run 'apt list --upgradable' to see them.
kali@kali:
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
python-pip-whl python3-wheel
The following NEW packages will be installed:
python-pip-whl python3-pip python3-wheel
0 upgraded, 3 newly installed, 0 to remove and 562 not upgraded.
Need to get 2,078 kB of archives.
After this operation, 3,329 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://kali.download/kali kali-rolling/main amd64 python-pip-whl all 20.0.2-5kali1 [1,842 kB]
Get:2 http://kali.download/kali kali-rolling/main amd64 python3-wheel all 0.34.2-1 [24.0 kB]
Get:3 http://kali.download/kali kali-rolling/main amd64 python3-pip all 20.0.2-5kali1 [211 kB]
Fetched 2,078 kB in 1s (3,790 kB/s)
Selecting previously unselected package python-pip-whl.
(Reading database ... 257891 files and directories currently installed.)
Preparing to unpack .../python-pip-whl_20.0.2-5kali1_all.deb ...
Unpacking python-pip-whl (20.0.2-5kali1) ...
Selecting previously unselected package python3-wheel.
Preparing to unpack .../python3-wheel_0.34.2-1_all.deb ...
Unpacking python3-wheel (0.34.2-1) ...
Selecting previously unselected package python3-pip.
Preparing to unpack .../python3-pip_20.0.2-5kali1_all.deb ...
Unpacking python3-pip (20.0.2-5kali1) ...
Setting up python3-wheel (0.34.2-1) ...
Setting up python-pip-whl (20.0.2-5kali1) ...
Setting up python3-pip (20.0.2-5kali1) ...
Processing triggers for man-db (2.9.3-2) ...
Processing triggers for kali-menu (2020.3.2) ...
kali@kali:$ python3 -m pip install --user pipx$ python3 -m pipx ensurepath
Collecting pipx
Downloading pipx-0.15.5.1-py3-none-any.whl (41 kB)
|████████████████████████████████| 41 kB 898 kB/s
Collecting userpath>=1.4.1
Downloading userpath-1.4.1-py2.py3-none-any.whl (14 kB)
Collecting argcomplete<2.0,>=1.9.4
Downloading argcomplete-1.12.0-py2.py3-none-any.whl (38 kB)
Requirement already satisfied: packaging>=20.0 in /usr/lib/python3/dist-packages (from pipx) (20.3)
Requirement already satisfied: click in /usr/lib/python3/dist-packages (from userpath>=1.4.1->pipx) (7.0)
Requirement already satisfied: distro; platform_system == "Linux" in /usr/lib/python3/dist-packages (from userpath>=1.4.1->pipx) (1.5.0)
Installing collected packages: userpath, argcomplete, pipx
WARNING: The script userpath is installed in '/home/kali/.local/bin' which is not on PATH.
Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location.
WARNING: The script pipx is installed in '/home/kali/.local/bin' which is not on PATH.
Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location.
Successfully installed argcomplete-1.12.0 pipx-0.15.5.1 userpath-1.4.1
kali@kali:
Success! Added /home/kali/.local/bin to the PATH environment variable.
/home/kali/.local/bin has been been added to PATH, but you need to
open a new terminal or re-login for this PATH change to take
effect.
Consider adding shell completions for pipx. Run 'pipx completions' for
instructions.
You will need to open a new terminal or re-login for the PATH changes
to take effect.
Otherwise pipx is ready to go! ✨ 🌟 ✨
kali@kali:$ python3 -m pip install --user pipx$ pipx install git+https://github.com/Tib3rius/AutoRecon.git
Requirement already satisfied: pipx in ./.local/lib/python3.8/site-packages (0.15.5.1)
Requirement already satisfied: packaging>=20.0 in /usr/lib/python3/dist-packages (from pipx) (20.3)
Requirement already satisfied: userpath>=1.4.1 in ./.local/lib/python3.8/site-packages (from pipx) (1.4.1)
Requirement already satisfied: argcomplete<2.0,>=1.9.4 in ./.local/lib/python3.8/site-packages (from pipx) (1.12.0)
Requirement already satisfied: distro; platform_system == "Linux" in /usr/lib/python3/dist-packages (from userpath>=1.4.1->pipx) (1.5.0)
Requirement already satisfied: click in /usr/lib/python3/dist-packages (from userpath>=1.4.1->pipx) (7.0)
kali@kali:
bash: pipx: command not found
kali@kali:$ sudo apt install pipx$ pipx install git+https://github.com/Tib3rius/AutoRecon.git
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following package was automatically installed and is no longer required:
libmpdec2
Use 'sudo apt autoremove' to remove it.
The following additional packages will be installed:
libpython3.8 libpython3.8-dev libpython3.8-minimal libpython3.8-stdlib python3-venv python3.8 python3.8-dev python3.8-minimal python3.8-venv
Suggested packages:
python3.8-doc
The following NEW packages will be installed:
pipx python3-venv python3.8-venv
The following packages will be upgraded:
libpython3.8 libpython3.8-dev libpython3.8-minimal libpython3.8-stdlib python3.8 python3.8-dev python3.8-minimal
7 upgraded, 3 newly installed, 0 to remove and 555 not upgraded.
Need to get 10.8 MB of archives.
After this operation, 381 kB disk space will be freed.
Do you want to continue? [Y/n] y
Get:1 http://kali.download/kali kali-rolling/main amd64 python3.8-dev amd64 3.8.5-2 [514 kB]
Get:2 http://kali.download/kali kali-rolling/main amd64 python3.8 amd64 3.8.5-2 [420 kB]
Get:3 http://kali.download/kali kali-rolling/main amd64 libpython3.8-dev amd64 3.8.5-2 [3,840 kB]
Get:4 http://kali.download/kali kali-rolling/main amd64 libpython3.8 amd64 3.8.5-2 [1,608 kB]
Get:5 http://kali.download/kali kali-rolling/main amd64 libpython3.8-stdlib amd64 3.8.5-2 [1,725 kB]
Get:6 http://kali.download/kali kali-rolling/main amd64 python3.8-minimal amd64 3.8.5-2 [1,865 kB]
Get:7 http://kali.download/kali kali-rolling/main amd64 libpython3.8-minimal amd64 3.8.5-2 [761 kB]
Get:8 http://kali.download/kali kali-rolling/main amd64 python3.8-venv amd64 3.8.5-2 [5,392 B]
Get:9 http://kali.download/kali kali-rolling/main amd64 python3-venv amd64 3.8.2-3 [1,180 B]
Get:10 http://kali.download/kali kali-rolling/main amd64 pipx all 0.12.3.1-3 [24.5 kB]
Fetched 10.8 MB in 1s (8,467 kB/s)
(Reading database ... 258094 files and directories currently installed.)
Preparing to unpack .../0-python3.8-dev_3.8.5-2_amd64.deb ...
Unpacking python3.8-dev (3.8.5-2) over (3.8.4-1) ...
Preparing to unpack .../1-python3.8_3.8.5-2_amd64.deb ...
Unpacking python3.8 (3.8.5-2) over (3.8.4-1) ...
Preparing to unpack .../2-libpython3.8-dev_3.8.5-2_amd64.deb ...
Unpacking libpython3.8-dev:amd64 (3.8.5-2) over (3.8.4-1) ...
Preparing to unpack .../3-libpython3.8_3.8.5-2_amd64.deb ...
Unpacking libpython3.8:amd64 (3.8.5-2) over (3.8.4-1) ...
Preparing to unpack .../4-libpython3.8-stdlib_3.8.5-2_amd64.deb ...
Unpacking libpython3.8-stdlib:amd64 (3.8.5-2) over (3.8.4-1) ...
Preparing to unpack .../5-python3.8-minimal_3.8.5-2_amd64.deb ...
Unpacking python3.8-minimal (3.8.5-2) over (3.8.4-1) ...
Preparing to unpack .../6-libpython3.8-minimal_3.8.5-2_amd64.deb ...
Unpacking libpython3.8-minimal:amd64 (3.8.5-2) over (3.8.4-1) ...
Selecting previously unselected package python3.8-venv.
Preparing to unpack .../7-python3.8-venv_3.8.5-2_amd64.deb ...
Unpacking python3.8-venv (3.8.5-2) ...
Selecting previously unselected package python3-venv.
Preparing to unpack .../8-python3-venv_3.8.2-3_amd64.deb ...
Unpacking python3-venv (3.8.2-3) ...
Selecting previously unselected package pipx.
Preparing to unpack .../9-pipx_0.12.3.1-3_all.deb ...
Unpacking pipx (0.12.3.1-3) ...
Setting up libpython3.8-minimal:amd64 (3.8.5-2) ...
Setting up python3.8-minimal (3.8.5-2) ...
Setting up libpython3.8-stdlib:amd64 (3.8.5-2) ...
Setting up python3.8 (3.8.5-2) ...
Setting up libpython3.8:amd64 (3.8.5-2) ...
Setting up python3.8-venv (3.8.5-2) ...
Setting up python3-venv (3.8.2-3) ...
Setting up libpython3.8-dev:amd64 (3.8.5-2) ...
Setting up python3.8-dev (3.8.5-2) ...
Setting up pipx (0.12.3.1-3) ...
Processing triggers for kali-menu (2020.3.2) ...
Processing triggers for desktop-file-utils (0.26-1) ...
Processing triggers for mime-support (3.64) ...
Processing triggers for libc-bin (2.30-8) ...
Processing triggers for man-db (2.9.3-2) ...
kali@kali:
Package cannot be a url
from autorecon.
Fixed.. ended up having to run : python3 -m pip install --user -U pipx
This updated the package and installed successfully
from autorecon.
Related Issues (20)
- Too slow in ARM based kali linux HOT 1
- interface option HOT 1
- smbmap started hanging the scans HOT 4
- Issue with markdown report plugin - OffSec Proving Grounds Practice HOT 5
- Suggestion: running snmpbulkwalk to get ExtendObjects
- Thoughts on adding IPV6 checking HOT 3
- User agent configuration
- TypeError: can only concatenate str (not "list") to str HOT 2
- Is it possible to only create results folder for scans that have open ports?
- Where is the --profile option now? HOT 6
- Trouble getting heartbeat to work HOT 2
- dirbuster scans often never finish HOT 16
- smbmap hanging every scan i run HOT 2
- SyntaxWarning: Invalid Escape Sequence HOT 1
- dirbuster (feroxbuster) scans hang, doesn't generate any network traffic HOT 2
- Enter key temporarily sent to feroxbuster scanner HOT 2
- Error: There are no valid PortScan plugins in the plugins directory "/root/.local/share/AutoRecon/plugins" HOT 1
- How to ignore hosts that are not up from entire subnet scan?
- Only report open ports - Suggestion HOT 2
- Use snap HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from autorecon.