Anyone with problems? ->Miflora Firmware 3.3.5 about miflora-mqtt-daemon

[Firepower]

Strange, tried different things, none of these worked. Yesterday I had to restart my pi and now its working. So my issue is resolved ;-)

[ThomDietrich]

Strange but relieved there is no new issue. I will mention your firmware 3.3.5 in the README as tested. Thanks!

[jorgnyg]

@ThomDietrich @Firepower I'm getting the same error when running docker.
It connects successfully with python3 /opt/miflora-mqtt-daemon/miflora-mqtt-daemon.py,
but running docker run -it --name miflora-mqtt-daemon -v /opt/miflora-mqtt-daemon/config.ini:/config/config.ini miflora-mqtt-daemon results in:

[2022-01-08 10:12:58] Initial connection to Mi Flora sensor "Chili" (C4:7C:8D:6C:94:33) failed due to exception: 
[2022-01-08 10:12:58] Announcing Mi Flora devices to MQTT broker for auto-discovery ...
[2022-01-08 10:12:58] Retrieving data from sensor "Chili" ...
[2022-01-08 10:12:59] Retrying ...
[2022-01-08 10:12:59] Failed to retrieve data from Mi Flora sensor "Chili" (C4:7C:8D:6C:94:33), success rate: 0%

Config file is mounted correctly, since changes in config file (like device name) is correctly reflected in log output. Could have something to do with access to bluetooth interface when running with docker or something?

[Firepower]

@jorgnyg This is the same problem i had. After some restarts of my raspberry pi it worked again. Before that I tried to restart miflora.service which didn't work. Since then its running fine.