Error after running gst-launch-0.10 <...> command! about tiscamera

[TIS-Stefan]

Hello

please exchange "tis_auto_exposure ! tiscolorize" against "tiscolorize ! tis_auto_exposure".

Also I would like you to update the "src" directory and rebuild our pipeline modules.

Stefan

[swetham92]

I am also facing the same problem/error message while trying to use gst-launch with the odroid board (ubuntu version 15.04). However the same pipeline worked with a desktop PC with Ubuntu version 12.04 installed in it. I had followed the same steps outlined in the below link in both the cases. And the camera module I am using is Imaging source camera DFK 22BUC03.
Link-
https://github.com/TheImagingSource/tiscamera/wiki/Getting-Started-with-USB-2.0-cameras-on-a-Raspberry-PI-or-on-other-Linux-Systems

The pipeline I used was-
gst-launch-0.10 v4l2src ! video/x-raw-gray ! tisvideobufferfilter ! tiscolorize ! tis_auto_exposure ! queue ! tiswhitebalance ! queue ! bayer2rgb ! queue ! ffmpegcolorspace ! ximagesink

Please give appropriate suggestions so that I can get the problem rectified at the earliest.

Thanks & regards

[TIS-Stefan]

Hello

what happens, if you remove the "tis_auto_exposure"?

Stefan

[swetham92]

The error message remains still the same after removing tis_auto_exposure. Sorry for the trouble in posting it in multiple places.