Issue with mod about manualattach

[KITT3000]

The problem is not with any mod. You just don't have all the tools you need. Connect to a tractor (which supports an additional tool pipe) e.g. Kuhn TF 1512 and the problem will disappear.

[Horozor]

@KITT3000
You're right .. However, this makes it impossible to use the planter without Kuhn TF 1512. Well, have to look for another solution

[KITT3000]

@Horozor Only that technically you shouldn'tt be able to use this seeder without such a tank, it has a connection to such a tank so it should be connected. In the same way, e.g. you can't use Kuhn BTF 4000 without Kuhn TF 1512.

Edit:
I checked in the net and did not see the version with this pipe connection to an additional tank, so the author of the mod should add it in the configuration, then the problem will not appear when he chooses the version without this connection.

The easiest way to solve this problem is to remove line 203.

<hose inputAttacherJointIndices="1" type="TOOL_CONNECTOR_TOP_RIGHT" node="topRightPipe" length="1.5" diameter="0.14" isTwoPointHose="true"/>

[Horozor]

@KITT3000
Yes, that helped. Thanks. I did not notice the difference between the standard planter and the mod, I thought that only the fertilizer tank was added to the mod

[EradicationGod]

Same issue here with the John Deere 750A 3m/6m mod from CyrilModding88.

I already posted on this in the Giants forum, so I'm not double posting it here as well.
Would like some more insight on this though...

Thanks and keep up the good work.