Install DUMPI libaray about sst-dumpi

[jjwilke]

You do not have autoconf installed or libtool installed on your system. You can build from the tarball - but you will at least need automake for this. These are common packages and should be easy to install with whatever package manger you have on your system. 1) autoconf 2) automake 3) libtool

…

-Jeremy From: Jinzhen Wang <[email protected]<mailto:[email protected]>> Reply-To: sstsimulator/sst-dumpi <[email protected]<mailto:[email protected]>> Date: Monday, October 2, 2017 at 12:53 PM To: sstsimulator/sst-dumpi <[email protected]<mailto:[email protected]>> Cc: Subscribed <[email protected]<mailto:[email protected]>> Subject: [EXTERNAL] [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) Hi, I am trying to install dumpi library when I encountered the problem. When I cloned the git and was tryign to run ./bootstrap.sh, the terminal prompted an error saying ./bootstrap.sh: 14: ./bootstrap.sh: glibtoolize: not found ./bootstrap.sh: 15: ./bootstrap.sh: autoreconf: not found I am wondering how did it happen and how to solve it. Thanks, — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub<#7>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2U6zo1WerAL094gVzGU8VKt8ZuBCks5soT9MgaJpZM4PrKUE>.

[jw447]

Thank you Jeremy, I didn’t realize that glibtoolize and autoreconf are packages that I should install. May I follow up another question that is: after I run ./bootstrap.sh to install dumpi library, where should I add -L$(PATH_TO_DUMPI) -ldumpi to link dumpi library to mpi calls? Thanks, Jinzhen

…

On Oct 2, 2017, at 3:56 PM, Jeremy ***@***.***> wrote: You do not have autoconf installed or libtool installed on your system. You can build from the tarball - but you will at least need automake for this. These are common packages and should be easy to install with whatever package manger you have on your system. 1) autoconf 2) automake 3) libtool -Jeremy From: Jinzhen Wang ***@***.******@***.***>> Reply-To: sstsimulator/sst-dumpi ***@***.******@***.***>> Date: Monday, October 2, 2017 at 12:53 PM To: sstsimulator/sst-dumpi ***@***.******@***.***>> Cc: Subscribed ***@***.******@***.***>> Subject: [EXTERNAL] [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) Hi, I am trying to install dumpi library when I encountered the problem. When I cloned the git and was tryign to run ./bootstrap.sh, the terminal prompted an error saying ./bootstrap.sh: 14: ./bootstrap.sh: glibtoolize: not found ./bootstrap.sh: 15: ./bootstrap.sh: autoreconf: not found I am wondering how did it happen and how to solve it. Thanks, — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub<#7>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2U6zo1WerAL094gVzGU8VKt8ZuBCks5soT9MgaJpZM4PrKUE>. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#7 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWHMUIqbhvZ2qa_f7jqBTFnDKcRu8ks5soT_egaJpZM4PrKUE>.

[jjwilke]

That will depend on your build system. The -ldumpi goes in LIBS and -L... goes in LDFLAGS for Makefiles. CMake is a little different.

-Jeremy From: Jinzhen Wang <[email protected]<mailto:[email protected]>> Reply-To: sstsimulator/sst-dumpi <[email protected]<mailto:[email protected]>> Date: Monday, October 2, 2017 at 1:07 PM To: sstsimulator/sst-dumpi <[email protected]<mailto:[email protected]>> Cc: "Wilke, Jeremiah J" <[email protected]<mailto:[email protected]>>, Comment <[email protected]<mailto:[email protected]>> Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) Thank you Jeremy, I didn’t realize that glibtoolize and autoreconf are packages that I should install. May I follow up another question that is: after I run ./bootstrap.sh to install dumpi library, where should I add -L$(PATH_TO_DUMPI) -ldumpi to link dumpi library to mpi calls? Thanks, Jinzhen

On Oct 2, 2017, at 3:56 PM, Jeremy ***@***.******@***.***>> wrote: You do not have autoconf installed or libtool installed on your system. You can build from the tarball - but you will at least need automake for this. These are common packages and should be easy to install with whatever package manger you have on your system. 1) autoconf 2) automake 3) libtool -Jeremy From: Jinzhen Wang ***@***.******@***.******@***.***>> Reply-To: sstsimulator/sst-dumpi ***@***.******@***.******@***.***>> Date: Monday, October 2, 2017 at 12:53 PM To: sstsimulator/sst-dumpi ***@***.******@***.******@***.***>> Cc: Subscribed ***@***.******@***.******@***.***>> Subject: [EXTERNAL] [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) Hi, I am trying to install dumpi library when I encountered the problem. When I cloned the git and was tryign to run ./bootstrap.sh, the terminal prompted an error saying ./bootstrap.sh: 14: ./bootstrap.sh: glibtoolize: not found ./bootstrap.sh: 15: ./bootstrap.sh: autoreconf: not found I am wondering how did it happen and how to solve it. Thanks, — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub<#7>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2U6zo1WerAL094gVzGU8VKt8ZuBCks5soT9MgaJpZM4PrKUE>. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#7 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWHMUIqbhvZ2qa_f7jqBTFnDKcRu8ks5soT_egaJpZM4PrKUE>.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub<#7 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2f7W3153L3R1UdieyxOrerJJDPGxks5soUJ1gaJpZM4PrKUE>.

[jw447]

Thanks, so for my makefiles, should I change it update like this? I am not getting new dumpi log file though. Jinzhen

…

On Oct 2, 2017, at 4:08 PM, Jeremy ***@***.***> wrote: That will depend on your build system. The -ldumpi goes in LIBS and -L... goes in LDFLAGS for Makefiles. CMake is a little different. -Jeremy From: Jinzhen Wang ***@***.******@***.***>> Reply-To: sstsimulator/sst-dumpi ***@***.******@***.***>> Date: Monday, October 2, 2017 at 1:07 PM To: sstsimulator/sst-dumpi ***@***.******@***.***>> Cc: "Wilke, Jeremiah J" ***@***.******@***.***>>, Comment ***@***.******@***.***>> Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) Thank you Jeremy, I didn’t realize that glibtoolize and autoreconf are packages that I should install. May I follow up another question that is: after I run ./bootstrap.sh to install dumpi library, where should I add -L$(PATH_TO_DUMPI) -ldumpi to link dumpi library to mpi calls? Thanks, Jinzhen > On Oct 2, 2017, at 3:56 PM, Jeremy ***@***.******@***.***>> wrote: > > You do not have autoconf installed or libtool installed on your system. You can build from the tarball - but you will at least need automake for this. > These are common packages and should be easy to install with whatever package manger you have on your system. > > 1) autoconf > 2) automake > 3) libtool > > -Jeremy > > From: Jinzhen Wang ***@***.******@***.******@***.***>> > Reply-To: sstsimulator/sst-dumpi ***@***.******@***.******@***.***>> > Date: Monday, October 2, 2017 at 12:53 PM > To: sstsimulator/sst-dumpi ***@***.******@***.******@***.***>> > Cc: Subscribed ***@***.******@***.******@***.***>> > Subject: [EXTERNAL] [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) > > > Hi, > > I am trying to install dumpi library when I encountered the problem. When I cloned the git and was tryign to run ./bootstrap.sh, the terminal prompted an error saying > > ./bootstrap.sh: 14: ./bootstrap.sh: glibtoolize: not found > ./bootstrap.sh: 15: ./bootstrap.sh: autoreconf: not found > > I am wondering how did it happen and how to solve it. > > Thanks, > > — > You are receiving this because you are subscribed to this thread. > Reply to this email directly, view it on GitHub<#7>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2U6zo1WerAL094gVzGU8VKt8ZuBCks5soT9MgaJpZM4PrKUE>. > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub <#7 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWHMUIqbhvZ2qa_f7jqBTFnDKcRu8ks5soT_egaJpZM4PrKUE>. > — You are receiving this because you commented. Reply to this email directly, view it on GitHub<#7 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2f7W3153L3R1UdieyxOrerJJDPGxks5soUJ1gaJpZM4PrKUE>. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#7 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWGzMhXQDCN-bhoKDXV7DjeBrXOXxks5soULUgaJpZM4PrKUE>.

[jjwilke]

Can you send a plain text cut/paste? My virus blocker won't let the picture through.

-Jeremy From: Jinzhen Wang <[email protected]<mailto:[email protected]>> Reply-To: sstsimulator/sst-dumpi <[email protected]<mailto:[email protected]>> Date: Monday, October 2, 2017 at 1:46 PM To: sstsimulator/sst-dumpi <[email protected]<mailto:[email protected]>> Cc: "Wilke, Jeremiah J" <[email protected]<mailto:[email protected]>>, Comment <[email protected]<mailto:[email protected]>> Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) Thanks, so for my makefiles, should I change it update like this? I am not getting new dumpi log file though. Jinzhen

On Oct 2, 2017, at 4:08 PM, Jeremy ***@***.******@***.***>> wrote: That will depend on your build system. The -ldumpi goes in LIBS and -L... goes in LDFLAGS for Makefiles. CMake is a little different. -Jeremy From: Jinzhen Wang ***@***.******@***.******@***.***>> Reply-To: sstsimulator/sst-dumpi ***@***.******@***.******@***.***>> Date: Monday, October 2, 2017 at 1:07 PM To: sstsimulator/sst-dumpi ***@***.******@***.******@***.***>> Cc: "Wilke, Jeremiah J" ***@***.******@***.******@***.***>>, Comment ***@***.******@***.******@***.***>> Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) Thank you Jeremy, I didn’t realize that glibtoolize and autoreconf are packages that I should install. May I follow up another question that is: after I run ./bootstrap.sh to install dumpi library, where should I add -L$(PATH_TO_DUMPI) -ldumpi to link dumpi library to mpi calls? Thanks, Jinzhen > On Oct 2, 2017, at 3:56 PM, Jeremy ***@***.******@***.******@***.***>> wrote: > > You do not have autoconf installed or libtool installed on your system. You can build from the tarball - but you will at least need automake for this. > These are common packages and should be easy to install with whatever package manger you have on your system. > > 1) autoconf > 2) automake > 3) libtool > > -Jeremy > > From: Jinzhen Wang ***@***.******@***.******@***.******@***.***>> > Reply-To: sstsimulator/sst-dumpi ***@***.******@***.******@***.******@***.***>> > Date: Monday, October 2, 2017 at 12:53 PM > To: sstsimulator/sst-dumpi ***@***.******@***.******@***.******@***.***>> > Cc: Subscribed ***@***.******@***.******@***.******@***.***>> > Subject: [EXTERNAL] [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) > > > Hi, > > I am trying to install dumpi library when I encountered the problem. When I cloned the git and was tryign to run ./bootstrap.sh, the terminal prompted an error saying > > ./bootstrap.sh: 14: ./bootstrap.sh: glibtoolize: not found > ./bootstrap.sh: 15: ./bootstrap.sh: autoreconf: not found > > I am wondering how did it happen and how to solve it. > > Thanks, > > — > You are receiving this because you are subscribed to this thread. > Reply to this email directly, view it on GitHub<#7>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2U6zo1WerAL094gVzGU8VKt8ZuBCks5soT9MgaJpZM4PrKUE>. > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub <#7 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWHMUIqbhvZ2qa_f7jqBTFnDKcRu8ks5soT_egaJpZM4PrKUE>. > — You are receiving this because you commented. Reply to this email directly, view it on GitHub<#7 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2f7W3153L3R1UdieyxOrerJJDPGxks5soUJ1gaJpZM4PrKUE>. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#7 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWGzMhXQDCN-bhoKDXV7DjeBrXOXxks5soULUgaJpZM4PrKUE>.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub<#7 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2eu56Wv7Z_lgsBoAWvcWx1mt-4Leks5soUuMgaJpZM4PrKUE>.

[jw447]

Make file: EXECS=mpi_hello_world MPICC?=mpicc LDFLAGS=-L$(/home/jon/sst-dumpi) LIBS=-ldumpi all: ${EXECS} mpi_hello_world: mpi_hello_world.c ${MPICC} -o mpi_hello_world mpi_hello_world.c clean: rm -f ${EXECS}

…

On Oct 2, 2017, at 4:57 PM, Jinzhen Wang ***@***.***> wrote: I am forwarding my c code and make file as attachments. Thank you for your time. Thanks, Jinzhen <makefile> <mpi_hello_world.c> > On Oct 2, 2017, at 4:47 PM, Jeremy ***@***.*** ***@***.***>> wrote: > > Can you send a plain text cut/paste? My virus blocker won't let the picture through. > > -Jeremy > > From: Jinzhen Wang ***@***.*** ***@***.******@***.*** ***@***.***>>> > Reply-To: sstsimulator/sst-dumpi ***@***.*** ***@***.******@***.*** ***@***.***>>> > Date: Monday, October 2, 2017 at 1:46 PM > To: sstsimulator/sst-dumpi ***@***.*** ***@***.******@***.*** ***@***.***>>> > Cc: "Wilke, Jeremiah J" ***@***.*** ***@***.******@***.*** ***@***.***>>>, Comment ***@***.*** ***@***.******@***.*** ***@***.***>>> > Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) > > Thanks, so for my makefiles, should I change it update like this? I am not getting new dumpi log file though. > > Jinzhen > > > > On Oct 2, 2017, at 4:08 PM, Jeremy ***@***.*** ***@***.******@***.*** ***@***.***>>> wrote: > > > > That will depend on your build system. The -ldumpi goes in LIBS and -L... goes in LDFLAGS for Makefiles. CMake is a little different. > > > > -Jeremy > > > > From: Jinzhen Wang ***@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > > Reply-To: sstsimulator/sst-dumpi ***@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > > Date: Monday, October 2, 2017 at 1:07 PM > > To: sstsimulator/sst-dumpi ***@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > > Cc: "Wilke, Jeremiah J" ***@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>>, Comment ***@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > > Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) > > > > Thank you Jeremy, I didn’t realize that glibtoolize and autoreconf are packages that I should install. May I follow up another question that is: after I run ./bootstrap.sh to install dumpi library, where should I add -L$(PATH_TO_DUMPI) -ldumpi to link dumpi library to mpi calls? > > > > Thanks, > > Jinzhen > > > On Oct 2, 2017, at 3:56 PM, Jeremy ***@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> wrote: > > > > > > You do not have autoconf installed or libtool installed on your system. You can build from the tarball - but you will at least need automake for this. > > > These are common packages and should be easy to install with whatever package manger you have on your system. > > > > > > 1) autoconf > > > 2) automake > > > 3) libtool > > > > > > -Jeremy > > > > > > From: Jinzhen Wang ***@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > > > Reply-To: sstsimulator/sst-dumpi ***@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > > > Date: Monday, October 2, 2017 at 12:53 PM > > > To: sstsimulator/sst-dumpi ***@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > > > Cc: Subscribed ***@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > > > Subject: [EXTERNAL] [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) > > > > > > > > > Hi, > > > > > > I am trying to install dumpi library when I encountered the problem. When I cloned the git and was tryign to run ./bootstrap.sh, the terminal prompted an error saying > > > > > > ./bootstrap.sh: 14: ./bootstrap.sh: glibtoolize: not found > > > ./bootstrap.sh: 15: ./bootstrap.sh: autoreconf: not found > > > > > > I am wondering how did it happen and how to solve it. > > > > > > Thanks, > > > > > > — > > > You are receiving this because you are subscribed to this thread. > > > Reply to this email directly, view it on GitHub<#7 <#7>>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2U6zo1WerAL094gVzGU8VKt8ZuBCks5soT9MgaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/AAGh2U6zo1WerAL094gVzGU8VKt8ZuBCks5soT9MgaJpZM4PrKUE>>. > > > — > > > You are receiving this because you authored the thread. > > > Reply to this email directly, view it on GitHub <#7 (comment) <#7 (comment)>>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWHMUIqbhvZ2qa_f7jqBTFnDKcRu8ks5soT_egaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/ATqYWHMUIqbhvZ2qa_f7jqBTFnDKcRu8ks5soT_egaJpZM4PrKUE>>. > > > > > > > > > — > > You are receiving this because you commented. > > Reply to this email directly, view it on GitHub<#7 (comment) <#7 (comment)>>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2f7W3153L3R1UdieyxOrerJJDPGxks5soUJ1gaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/AAGh2f7W3153L3R1UdieyxOrerJJDPGxks5soUJ1gaJpZM4PrKUE>>. > > — > > You are receiving this because you authored the thread. > > Reply to this email directly, view it on GitHub <#7 (comment) <#7 (comment)>>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWGzMhXQDCN-bhoKDXV7DjeBrXOXxks5soULUgaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/ATqYWGzMhXQDCN-bhoKDXV7DjeBrXOXxks5soULUgaJpZM4PrKUE>>. > > > > > — > You are receiving this because you commented. > Reply to this email directly, view it on GitHub<#7 (comment) <#7 (comment)>>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2eu56Wv7Z_lgsBoAWvcWx1mt-4Leks5soUuMgaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/AAGh2eu56Wv7Z_lgsBoAWvcWx1mt-4Leks5soUuMgaJpZM4PrKUE>>. > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub <#7 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWAKl2hElY2htQCV6tzpDr9Uj4re5ks5soUvhgaJpZM4PrKUE>. >

[jjwilke]

Correct. But I think LDFLAGS should be:

-L/home/jon/sst-dumpi/lib

-Jeremy From: Jinzhen Wang <[email protected]<mailto:[email protected]>> Reply-To: sstsimulator/sst-dumpi <[email protected]<mailto:[email protected]>> Date: Monday, October 2, 2017 at 2:35 PM To: sstsimulator/sst-dumpi <[email protected]<mailto:[email protected]>> Cc: "Wilke, Jeremiah J" <[email protected]<mailto:[email protected]>>, Comment <[email protected]<mailto:[email protected]>> Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) Make file: EXECS=mpi_hello_world MPICC?=mpicc LDFLAGS=-L$(/home/jon/sst-dumpi) LIBS=-ldumpi all: ${EXECS} mpi_hello_world: mpi_hello_world.c ${MPICC} -o mpi_hello_world mpi_hello_world.c clean: rm -f ${EXECS}

On Oct 2, 2017, at 4:57 PM, Jinzhen Wang ***@***.******@***.***>> wrote: I am forwarding my c code and make file as attachments. Thank you for your time. Thanks, Jinzhen <makefile> <mpi_hello_world.c> > On Oct 2, 2017, at 4:47 PM, Jeremy ***@***.******@***.***> ***@***.***>> wrote: > > Can you send a plain text cut/paste? My virus blocker won't let the picture through. > > -Jeremy > > From: Jinzhen Wang ***@***.******@***.***> ***@***.******@***.*** ***@***.***>>> > Reply-To: sstsimulator/sst-dumpi ***@***.******@***.***> ***@***.******@***.*** ***@***.***>>> > Date: Monday, October 2, 2017 at 1:46 PM > To: sstsimulator/sst-dumpi ***@***.******@***.***> ***@***.******@***.*** ***@***.***>>> > Cc: "Wilke, Jeremiah J" ***@***.******@***.***> ***@***.******@***.*** ***@***.***>>>, Comment ***@***.******@***.***> ***@***.******@***.*** ***@***.***>>> > Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) > > Thanks, so for my makefiles, should I change it update like this? I am not getting new dumpi log file though. > > Jinzhen > > > > On Oct 2, 2017, at 4:08 PM, Jeremy ***@***.******@***.***> ***@***.******@***.*** ***@***.***>>> wrote: > > > > That will depend on your build system. The -ldumpi goes in LIBS and -L... goes in LDFLAGS for Makefiles. CMake is a little different. > > > > -Jeremy > > > > From: Jinzhen Wang ***@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > > Reply-To: sstsimulator/sst-dumpi ***@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > > Date: Monday, October 2, 2017 at 1:07 PM > > To: sstsimulator/sst-dumpi ***@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > > Cc: "Wilke, Jeremiah J" ***@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>>, Comment ***@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > > Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) > > > > Thank you Jeremy, I didn’t realize that glibtoolize and autoreconf are packages that I should install. May I follow up another question that is: after I run ./bootstrap.sh to install dumpi library, where should I add -L$(PATH_TO_DUMPI) -ldumpi to link dumpi library to mpi calls? > > > > Thanks, > > Jinzhen > > > On Oct 2, 2017, at 3:56 PM, Jeremy ***@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> wrote: > > > > > > You do not have autoconf installed or libtool installed on your system. You can build from the tarball - but you will at least need automake for this. > > > These are common packages and should be easy to install with whatever package manger you have on your system. > > > > > > 1) autoconf > > > 2) automake > > > 3) libtool > > > > > > -Jeremy > > > > > > From: Jinzhen Wang ***@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > > > Reply-To: sstsimulator/sst-dumpi ***@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > > > Date: Monday, October 2, 2017 at 12:53 PM > > > To: sstsimulator/sst-dumpi ***@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > > > Cc: Subscribed ***@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > > > Subject: [EXTERNAL] [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) > > > > > > > > > Hi, > > > > > > I am trying to install dumpi library when I encountered the problem. When I cloned the git and was tryign to run ./bootstrap.sh, the terminal prompted an error saying > > > > > > ./bootstrap.sh: 14: ./bootstrap.sh: glibtoolize: not found > > > ./bootstrap.sh: 15: ./bootstrap.sh: autoreconf: not found > > > > > > I am wondering how did it happen and how to solve it. > > > > > > Thanks, > > > > > > — > > > You are receiving this because you are subscribed to this thread. > > > Reply to this email directly, view it on GitHub<#7 <#7>>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2U6zo1WerAL094gVzGU8VKt8ZuBCks5soT9MgaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/AAGh2U6zo1WerAL094gVzGU8VKt8ZuBCks5soT9MgaJpZM4PrKUE>>. > > > — > > > You are receiving this because you authored the thread. > > > Reply to this email directly, view it on GitHub <#7 (comment) <#7 (comment)>>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWHMUIqbhvZ2qa_f7jqBTFnDKcRu8ks5soT_egaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/ATqYWHMUIqbhvZ2qa_f7jqBTFnDKcRu8ks5soT_egaJpZM4PrKUE>>. > > > > > > > > > — > > You are receiving this because you commented. > > Reply to this email directly, view it on GitHub<#7 (comment) <#7 (comment)>>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2f7W3153L3R1UdieyxOrerJJDPGxks5soUJ1gaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/AAGh2f7W3153L3R1UdieyxOrerJJDPGxks5soUJ1gaJpZM4PrKUE>>. > > — > > You are receiving this because you authored the thread. > > Reply to this email directly, view it on GitHub <#7 (comment) <#7 (comment)>>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWGzMhXQDCN-bhoKDXV7DjeBrXOXxks5soULUgaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/ATqYWGzMhXQDCN-bhoKDXV7DjeBrXOXxks5soULUgaJpZM4PrKUE>>. > > > > > — > You are receiving this because you commented. > Reply to this email directly, view it on GitHub<#7 (comment) <#7 (comment)>>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2eu56Wv7Z_lgsBoAWvcWx1mt-4Leks5soUuMgaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/AAGh2eu56Wv7Z_lgsBoAWvcWx1mt-4Leks5soUuMgaJpZM4PrKUE>>. > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub <#7 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWAKl2hElY2htQCV6tzpDr9Uj4re5ks5soUvhgaJpZM4PrKUE>. >

— You are receiving this because you commented. Reply to this email directly, view it on GitHub<#7 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2aFG3qH5ButmXFcwrD23jkPxjDhwks5soVclgaJpZM4PrKUE>.

[jw447]

The ssh-dumpi folder does not have the lib though. I git clone it from: https://github.com/sstsimulator/sst-dumpi <https://github.com/sstsimulator/sst-dumpi>

…

On Oct 2, 2017, at 5:40 PM, Jeremy ***@***.***> wrote: Correct. But I think LDFLAGS should be: -L/home/jon/sst-dumpi/lib -Jeremy From: Jinzhen Wang ***@***.******@***.***>> Reply-To: sstsimulator/sst-dumpi ***@***.******@***.***>> Date: Monday, October 2, 2017 at 2:35 PM To: sstsimulator/sst-dumpi ***@***.******@***.***>> Cc: "Wilke, Jeremiah J" ***@***.******@***.***>>, Comment ***@***.******@***.***>> Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) Make file: EXECS=mpi_hello_world MPICC?=mpicc LDFLAGS=-L$(/home/jon/sst-dumpi) LIBS=-ldumpi all: ${EXECS} mpi_hello_world: mpi_hello_world.c ${MPICC} -o mpi_hello_world mpi_hello_world.c clean: rm -f ${EXECS} > On Oct 2, 2017, at 4:57 PM, Jinzhen Wang ***@***.******@***.***>> wrote: > > I am forwarding my c code and make file as attachments. Thank you for your time. > > Thanks, > Jinzhen > <makefile> > <mpi_hello_world.c> > >> On Oct 2, 2017, at 4:47 PM, Jeremy ***@***.******@***.***> ***@***.***>> wrote: >> >> Can you send a plain text cut/paste? My virus blocker won't let the picture through. >> >> -Jeremy >> >> From: Jinzhen Wang ***@***.******@***.***> ***@***.******@***.*** ***@***.***>>> >> Reply-To: sstsimulator/sst-dumpi ***@***.******@***.***> ***@***.******@***.*** ***@***.***>>> >> Date: Monday, October 2, 2017 at 1:46 PM >> To: sstsimulator/sst-dumpi ***@***.******@***.***> ***@***.******@***.*** ***@***.***>>> >> Cc: "Wilke, Jeremiah J" ***@***.******@***.***> ***@***.******@***.*** ***@***.***>>>, Comment ***@***.******@***.***> ***@***.******@***.*** ***@***.***>>> >> Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) >> >> Thanks, so for my makefiles, should I change it update like this? I am not getting new dumpi log file though. >> >> Jinzhen >> >> >> > On Oct 2, 2017, at 4:08 PM, Jeremy ***@***.******@***.***> ***@***.******@***.*** ***@***.***>>> wrote: >> > >> > That will depend on your build system. The -ldumpi goes in LIBS and -L... goes in LDFLAGS for Makefiles. CMake is a little different. >> > >> > -Jeremy >> > >> > From: Jinzhen Wang ***@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> >> > Reply-To: sstsimulator/sst-dumpi ***@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> >> > Date: Monday, October 2, 2017 at 1:07 PM >> > To: sstsimulator/sst-dumpi ***@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> >> > Cc: "Wilke, Jeremiah J" ***@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>>, Comment ***@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> >> > Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) >> > >> > Thank you Jeremy, I didn’t realize that glibtoolize and autoreconf are packages that I should install. May I follow up another question that is: after I run ./bootstrap.sh to install dumpi library, where should I add -L$(PATH_TO_DUMPI) -ldumpi to link dumpi library to mpi calls? >> > >> > Thanks, >> > Jinzhen >> > > On Oct 2, 2017, at 3:56 PM, Jeremy ***@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> wrote: >> > > >> > > You do not have autoconf installed or libtool installed on your system. You can build from the tarball - but you will at least need automake for this. >> > > These are common packages and should be easy to install with whatever package manger you have on your system. >> > > >> > > 1) autoconf >> > > 2) automake >> > > 3) libtool >> > > >> > > -Jeremy >> > > >> > > From: Jinzhen Wang ***@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> >> > > Reply-To: sstsimulator/sst-dumpi ***@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> >> > > Date: Monday, October 2, 2017 at 12:53 PM >> > > To: sstsimulator/sst-dumpi ***@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> >> > > Cc: Subscribed ***@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> >> > > Subject: [EXTERNAL] [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) >> > > >> > > >> > > Hi, >> > > >> > > I am trying to install dumpi library when I encountered the problem. When I cloned the git and was tryign to run ./bootstrap.sh, the terminal prompted an error saying >> > > >> > > ./bootstrap.sh: 14: ./bootstrap.sh: glibtoolize: not found >> > > ./bootstrap.sh: 15: ./bootstrap.sh: autoreconf: not found >> > > >> > > I am wondering how did it happen and how to solve it. >> > > >> > > Thanks, >> > > >> > > — >> > > You are receiving this because you are subscribed to this thread. >> > > Reply to this email directly, view it on GitHub<#7 <#7>>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2U6zo1WerAL094gVzGU8VKt8ZuBCks5soT9MgaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/AAGh2U6zo1WerAL094gVzGU8VKt8ZuBCks5soT9MgaJpZM4PrKUE>>. >> > > — >> > > You are receiving this because you authored the thread. >> > > Reply to this email directly, view it on GitHub <#7 (comment) <#7 (comment)>>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWHMUIqbhvZ2qa_f7jqBTFnDKcRu8ks5soT_egaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/ATqYWHMUIqbhvZ2qa_f7jqBTFnDKcRu8ks5soT_egaJpZM4PrKUE>>. >> > > >> > >> > >> > — >> > You are receiving this because you commented. >> > Reply to this email directly, view it on GitHub<#7 (comment) <#7 (comment)>>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2f7W3153L3R1UdieyxOrerJJDPGxks5soUJ1gaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/AAGh2f7W3153L3R1UdieyxOrerJJDPGxks5soUJ1gaJpZM4PrKUE>>. >> > — >> > You are receiving this because you authored the thread. >> > Reply to this email directly, view it on GitHub <#7 (comment) <#7 (comment)>>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWGzMhXQDCN-bhoKDXV7DjeBrXOXxks5soULUgaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/ATqYWGzMhXQDCN-bhoKDXV7DjeBrXOXxks5soULUgaJpZM4PrKUE>>. >> > >> >> >> — >> You are receiving this because you commented. >> Reply to this email directly, view it on GitHub<#7 (comment) <#7 (comment)>>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2eu56Wv7Z_lgsBoAWvcWx1mt-4Leks5soUuMgaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/AAGh2eu56Wv7Z_lgsBoAWvcWx1mt-4Leks5soUuMgaJpZM4PrKUE>>. >> — >> You are receiving this because you authored the thread. >> Reply to this email directly, view it on GitHub <#7 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWAKl2hElY2htQCV6tzpDr9Uj4re5ks5soUvhgaJpZM4PrKUE>. >> > — You are receiving this because you commented. Reply to this email directly, view it on GitHub<#7 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2aFG3qH5ButmXFcwrD23jkPxjDhwks5soVclgaJpZM4PrKUE>. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#7 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWBVXRCoEDbtymIyZXmlSWV4_BEDrks5soVhAgaJpZM4PrKUE>.

[jjwilke]

Did you run 'make install'? From: Jinzhen Wang <[email protected]<mailto:[email protected]>> Reply-To: sstsimulator/sst-dumpi <[email protected]<mailto:[email protected]>> Date: Monday, October 2, 2017 at 2:53 PM To: sstsimulator/sst-dumpi <[email protected]<mailto:[email protected]>> Cc: "Wilke, Jeremiah J" <[email protected]<mailto:[email protected]>>, Comment <[email protected]<mailto:[email protected]>> Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) The ssh-dumpi folder does not have the lib though. I git clone it from: https://github.com/sstsimulator/sst-dumpi <https://github.com/sstsimulator/sst-dumpi>

On Oct 2, 2017, at 5:40 PM, Jeremy ***@***.******@***.***>> wrote: Correct. But I think LDFLAGS should be: -L/home/jon/sst-dumpi/lib -Jeremy From: Jinzhen Wang ***@***.******@***.******@***.***>> Reply-To: sstsimulator/sst-dumpi ***@***.******@***.******@***.***>> Date: Monday, October 2, 2017 at 2:35 PM To: sstsimulator/sst-dumpi ***@***.******@***.******@***.***>> Cc: "Wilke, Jeremiah J" ***@***.******@***.******@***.***>>, Comment ***@***.******@***.******@***.***>> Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) Make file: EXECS=mpi_hello_world MPICC?=mpicc LDFLAGS=-L$(/home/jon/sst-dumpi) LIBS=-ldumpi all: ${EXECS} mpi_hello_world: mpi_hello_world.c ${MPICC} -o mpi_hello_world mpi_hello_world.c clean: rm -f ${EXECS} > On Oct 2, 2017, at 4:57 PM, Jinzhen Wang ***@***.******@***.******@***.***>> wrote: > > I am forwarding my c code and make file as attachments. Thank you for your time. > > Thanks, > Jinzhen > <makefile> > <mpi_hello_world.c> > >> On Oct 2, 2017, at 4:47 PM, Jeremy ***@***.******@***.******@***.***> ***@***.***>> wrote: >> >> Can you send a plain text cut/paste? My virus blocker won't let the picture through. >> >> -Jeremy >> >> From: Jinzhen Wang ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.***>>> >> Reply-To: sstsimulator/sst-dumpi ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.***>>> >> Date: Monday, October 2, 2017 at 1:46 PM >> To: sstsimulator/sst-dumpi ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.***>>> >> Cc: "Wilke, Jeremiah J" ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.***>>>, Comment ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.***>>> >> Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) >> >> Thanks, so for my makefiles, should I change it update like this? I am not getting new dumpi log file though. >> >> Jinzhen >> >> >> > On Oct 2, 2017, at 4:08 PM, Jeremy ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.***>>> wrote: >> > >> > That will depend on your build system. The -ldumpi goes in LIBS and -L... goes in LDFLAGS for Makefiles. CMake is a little different. >> > >> > -Jeremy >> > >> > From: Jinzhen Wang ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> >> > Reply-To: sstsimulator/sst-dumpi ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> >> > Date: Monday, October 2, 2017 at 1:07 PM >> > To: sstsimulator/sst-dumpi ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> >> > Cc: "Wilke, Jeremiah J" ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>>, Comment ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> >> > Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) >> > >> > Thank you Jeremy, I didn’t realize that glibtoolize and autoreconf are packages that I should install. May I follow up another question that is: after I run ./bootstrap.sh to install dumpi library, where should I add -L$(PATH_TO_DUMPI) -ldumpi to link dumpi library to mpi calls? >> > >> > Thanks, >> > Jinzhen >> > > On Oct 2, 2017, at 3:56 PM, Jeremy ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> wrote: >> > > >> > > You do not have autoconf installed or libtool installed on your system. You can build from the tarball - but you will at least need automake for this. >> > > These are common packages and should be easy to install with whatever package manger you have on your system. >> > > >> > > 1) autoconf >> > > 2) automake >> > > 3) libtool >> > > >> > > -Jeremy >> > > >> > > From: Jinzhen Wang ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> >> > > Reply-To: sstsimulator/sst-dumpi ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> >> > > Date: Monday, October 2, 2017 at 12:53 PM >> > > To: sstsimulator/sst-dumpi ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> >> > > Cc: Subscribed ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> >> > > Subject: [EXTERNAL] [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) >> > > >> > > >> > > Hi, >> > > >> > > I am trying to install dumpi library when I encountered the problem. When I cloned the git and was tryign to run ./bootstrap.sh, the terminal prompted an error saying >> > > >> > > ./bootstrap.sh: 14: ./bootstrap.sh: glibtoolize: not found >> > > ./bootstrap.sh: 15: ./bootstrap.sh: autoreconf: not found >> > > >> > > I am wondering how did it happen and how to solve it. >> > > >> > > Thanks, >> > > >> > > — >> > > You are receiving this because you are subscribed to this thread. >> > > Reply to this email directly, view it on GitHub<#7 <#7>>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2U6zo1WerAL094gVzGU8VKt8ZuBCks5soT9MgaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/AAGh2U6zo1WerAL094gVzGU8VKt8ZuBCks5soT9MgaJpZM4PrKUE>>. >> > > — >> > > You are receiving this because you authored the thread. >> > > Reply to this email directly, view it on GitHub <#7 (comment) <#7 (comment)>>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWHMUIqbhvZ2qa_f7jqBTFnDKcRu8ks5soT_egaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/ATqYWHMUIqbhvZ2qa_f7jqBTFnDKcRu8ks5soT_egaJpZM4PrKUE>>. >> > > >> > >> > >> > — >> > You are receiving this because you commented. >> > Reply to this email directly, view it on GitHub<#7 (comment) <#7 (comment)>>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2f7W3153L3R1UdieyxOrerJJDPGxks5soUJ1gaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/AAGh2f7W3153L3R1UdieyxOrerJJDPGxks5soUJ1gaJpZM4PrKUE>>. >> > — >> > You are receiving this because you authored the thread. >> > Reply to this email directly, view it on GitHub <#7 (comment) <#7 (comment)>>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWGzMhXQDCN-bhoKDXV7DjeBrXOXxks5soULUgaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/ATqYWGzMhXQDCN-bhoKDXV7DjeBrXOXxks5soULUgaJpZM4PrKUE>>. >> > >> >> >> — >> You are receiving this because you commented. >> Reply to this email directly, view it on GitHub<#7 (comment) <#7 (comment)>>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2eu56Wv7Z_lgsBoAWvcWx1mt-4Leks5soUuMgaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/AAGh2eu56Wv7Z_lgsBoAWvcWx1mt-4Leks5soUuMgaJpZM4PrKUE>>. >> — >> You are receiving this because you authored the thread. >> Reply to this email directly, view it on GitHub <#7 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWAKl2hElY2htQCV6tzpDr9Uj4re5ks5soUvhgaJpZM4PrKUE>. >> > — You are receiving this because you commented. Reply to this email directly, view it on GitHub<#7 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2aFG3qH5ButmXFcwrD23jkPxjDhwks5soVclgaJpZM4PrKUE>. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#7 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWBVXRCoEDbtymIyZXmlSWV4_BEDrks5soVhAgaJpZM4PrKUE>.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub<#7 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2XgTeq67nFOZrrA6X-8npuhFOxMZks5soVtKgaJpZM4PrKUE>.

[jw447]

Should I run “make install” after ‘./bootstrap.sh’? I am not sure since it is not indicated in the instruction. ThankS, Jinzhen

…

On Oct 2, 2017, at 6:07 PM, Jeremy ***@***.***> wrote: Did you run 'make install'? From: Jinzhen Wang ***@***.******@***.***>> Reply-To: sstsimulator/sst-dumpi ***@***.******@***.***>> Date: Monday, October 2, 2017 at 2:53 PM To: sstsimulator/sst-dumpi ***@***.******@***.***>> Cc: "Wilke, Jeremiah J" ***@***.******@***.***>>, Comment ***@***.******@***.***>> Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) The ssh-dumpi folder does not have the lib though. I git clone it from: https://github.com/sstsimulator/sst-dumpi <https://github.com/sstsimulator/sst-dumpi> > On Oct 2, 2017, at 5:40 PM, Jeremy ***@***.******@***.***>> wrote: > > Correct. > > But I think LDFLAGS should be: > > -L/home/jon/sst-dumpi/lib > > -Jeremy > > From: Jinzhen Wang ***@***.******@***.******@***.***>> > Reply-To: sstsimulator/sst-dumpi ***@***.******@***.******@***.***>> > Date: Monday, October 2, 2017 at 2:35 PM > To: sstsimulator/sst-dumpi ***@***.******@***.******@***.***>> > Cc: "Wilke, Jeremiah J" ***@***.******@***.******@***.***>>, Comment ***@***.******@***.******@***.***>> > Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) > > Make file: > > EXECS=mpi_hello_world > MPICC?=mpicc > LDFLAGS=-L$(/home/jon/sst-dumpi) > LIBS=-ldumpi > all: ${EXECS} > > mpi_hello_world: mpi_hello_world.c > ${MPICC} -o mpi_hello_world mpi_hello_world.c > > clean: > rm -f ${EXECS} > > > > On Oct 2, 2017, at 4:57 PM, Jinzhen Wang ***@***.******@***.******@***.***>> wrote: > > > > I am forwarding my c code and make file as attachments. Thank you for your time. > > > > Thanks, > > Jinzhen > > <makefile> > > <mpi_hello_world.c> > > > >> On Oct 2, 2017, at 4:47 PM, Jeremy ***@***.******@***.******@***.***> ***@***.***>> wrote: > >> > >> Can you send a plain text cut/paste? My virus blocker won't let the picture through. > >> > >> -Jeremy > >> > >> From: Jinzhen Wang ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.***>>> > >> Reply-To: sstsimulator/sst-dumpi ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.***>>> > >> Date: Monday, October 2, 2017 at 1:46 PM > >> To: sstsimulator/sst-dumpi ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.***>>> > >> Cc: "Wilke, Jeremiah J" ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.***>>>, Comment ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.***>>> > >> Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) > >> > >> Thanks, so for my makefiles, should I change it update like this? I am not getting new dumpi log file though. > >> > >> Jinzhen > >> > >> > >> > On Oct 2, 2017, at 4:08 PM, Jeremy ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.***>>> wrote: > >> > > >> > That will depend on your build system. The -ldumpi goes in LIBS and -L... goes in LDFLAGS for Makefiles. CMake is a little different. > >> > > >> > -Jeremy > >> > > >> > From: Jinzhen Wang ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > >> > Reply-To: sstsimulator/sst-dumpi ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > >> > Date: Monday, October 2, 2017 at 1:07 PM > >> > To: sstsimulator/sst-dumpi ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > >> > Cc: "Wilke, Jeremiah J" ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>>, Comment ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > >> > Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) > >> > > >> > Thank you Jeremy, I didn’t realize that glibtoolize and autoreconf are packages that I should install. May I follow up another question that is: after I run ./bootstrap.sh to install dumpi library, where should I add -L$(PATH_TO_DUMPI) -ldumpi to link dumpi library to mpi calls? > >> > > >> > Thanks, > >> > Jinzhen > >> > > On Oct 2, 2017, at 3:56 PM, Jeremy ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> wrote: > >> > > > >> > > You do not have autoconf installed or libtool installed on your system. You can build from the tarball - but you will at least need automake for this. > >> > > These are common packages and should be easy to install with whatever package manger you have on your system. > >> > > > >> > > 1) autoconf > >> > > 2) automake > >> > > 3) libtool > >> > > > >> > > -Jeremy > >> > > > >> > > From: Jinzhen Wang ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > >> > > Reply-To: sstsimulator/sst-dumpi ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > >> > > Date: Monday, October 2, 2017 at 12:53 PM > >> > > To: sstsimulator/sst-dumpi ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > >> > > Cc: Subscribed ***@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > >> > > Subject: [EXTERNAL] [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) > >> > > > >> > > > >> > > Hi, > >> > > > >> > > I am trying to install dumpi library when I encountered the problem. When I cloned the git and was tryign to run ./bootstrap.sh, the terminal prompted an error saying > >> > > > >> > > ./bootstrap.sh: 14: ./bootstrap.sh: glibtoolize: not found > >> > > ./bootstrap.sh: 15: ./bootstrap.sh: autoreconf: not found > >> > > > >> > > I am wondering how did it happen and how to solve it. > >> > > > >> > > Thanks, > >> > > > >> > > — > >> > > You are receiving this because you are subscribed to this thread. > >> > > Reply to this email directly, view it on GitHub<#7 <#7>>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2U6zo1WerAL094gVzGU8VKt8ZuBCks5soT9MgaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/AAGh2U6zo1WerAL094gVzGU8VKt8ZuBCks5soT9MgaJpZM4PrKUE>>. > >> > > — > >> > > You are receiving this because you authored the thread. > >> > > Reply to this email directly, view it on GitHub <#7 (comment) <#7 (comment)>>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWHMUIqbhvZ2qa_f7jqBTFnDKcRu8ks5soT_egaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/ATqYWHMUIqbhvZ2qa_f7jqBTFnDKcRu8ks5soT_egaJpZM4PrKUE>>. > >> > > > >> > > >> > > >> > — > >> > You are receiving this because you commented. > >> > Reply to this email directly, view it on GitHub<#7 (comment) <#7 (comment)>>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2f7W3153L3R1UdieyxOrerJJDPGxks5soUJ1gaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/AAGh2f7W3153L3R1UdieyxOrerJJDPGxks5soUJ1gaJpZM4PrKUE>>. > >> > — > >> > You are receiving this because you authored the thread. > >> > Reply to this email directly, view it on GitHub <#7 (comment) <#7 (comment)>>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWGzMhXQDCN-bhoKDXV7DjeBrXOXxks5soULUgaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/ATqYWGzMhXQDCN-bhoKDXV7DjeBrXOXxks5soULUgaJpZM4PrKUE>>. > >> > > >> > >> > >> — > >> You are receiving this because you commented. > >> Reply to this email directly, view it on GitHub<#7 (comment) <#7 (comment)>>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2eu56Wv7Z_lgsBoAWvcWx1mt-4Leks5soUuMgaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/AAGh2eu56Wv7Z_lgsBoAWvcWx1mt-4Leks5soUuMgaJpZM4PrKUE>>. > >> — > >> You are receiving this because you authored the thread. > >> Reply to this email directly, view it on GitHub <#7 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWAKl2hElY2htQCV6tzpDr9Uj4re5ks5soUvhgaJpZM4PrKUE>. > >> > > > > > — > You are receiving this because you commented. > Reply to this email directly, view it on GitHub<#7 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2aFG3qH5ButmXFcwrD23jkPxjDhwks5soVclgaJpZM4PrKUE>. > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub <#7 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWBVXRCoEDbtymIyZXmlSWV4_BEDrks5soVhAgaJpZM4PrKUE>. > — You are receiving this because you commented. Reply to this email directly, view it on GitHub<#7 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2XgTeq67nFOZrrA6X-8npuhFOxMZks5soVtKgaJpZM4PrKUE>. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#7 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWDyoRVvYf2XboZsWX7V7dyZXPhpzks5soV6qgaJpZM4PrKUE>.

[jjwilke]

You'll likely want to review the basics of configure scripts, installation to prefix directory, makefiles, etc. This is not documented in DUMPI since these are standard tools with documentation elsewhere. If there's someone you work with who is familiar with CMake/configure scripts that can help you get started, that would be good.

-Jeremy From: Jinzhen Wang <[email protected]<mailto:[email protected]>> Reply-To: sstsimulator/sst-dumpi <[email protected]<mailto:[email protected]>> Date: Monday, October 2, 2017 at 3:39 PM To: sstsimulator/sst-dumpi <[email protected]<mailto:[email protected]>> Cc: "Wilke, Jeremiah J" <[email protected]<mailto:[email protected]>>, Comment <[email protected]<mailto:[email protected]>> Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) Should I run “make install” after ‘./bootstrap.sh’? I am not sure since it is not indicated in the instruction. ThankS, Jinzhen

On Oct 2, 2017, at 6:07 PM, Jeremy ***@***.******@***.***>> wrote: Did you run 'make install'? From: Jinzhen Wang ***@***.******@***.******@***.***>> Reply-To: sstsimulator/sst-dumpi ***@***.******@***.******@***.***>> Date: Monday, October 2, 2017 at 2:53 PM To: sstsimulator/sst-dumpi ***@***.******@***.******@***.***>> Cc: "Wilke, Jeremiah J" ***@***.******@***.******@***.***>>, Comment ***@***.******@***.******@***.***>> Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) The ssh-dumpi folder does not have the lib though. I git clone it from: https://github.com/sstsimulator/sst-dumpi <https://github.com/sstsimulator/sst-dumpi> > On Oct 2, 2017, at 5:40 PM, Jeremy ***@***.******@***.******@***.***>> wrote: > > Correct. > > But I think LDFLAGS should be: > > -L/home/jon/sst-dumpi/lib > > -Jeremy > > From: Jinzhen Wang ***@***.******@***.******@***.******@***.***>> > Reply-To: sstsimulator/sst-dumpi ***@***.******@***.******@***.******@***.***>> > Date: Monday, October 2, 2017 at 2:35 PM > To: sstsimulator/sst-dumpi ***@***.******@***.******@***.******@***.***>> > Cc: "Wilke, Jeremiah J" ***@***.******@***.******@***.******@***.***>>, Comment ***@***.******@***.******@***.******@***.***>> > Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) > > Make file: > > EXECS=mpi_hello_world > MPICC?=mpicc > LDFLAGS=-L$(/home/jon/sst-dumpi) > LIBS=-ldumpi > all: ${EXECS} > > mpi_hello_world: mpi_hello_world.c > ${MPICC} -o mpi_hello_world mpi_hello_world.c > > clean: > rm -f ${EXECS} > > > > On Oct 2, 2017, at 4:57 PM, Jinzhen Wang ***@***.******@***.******@***.******@***.***>> wrote: > > > > I am forwarding my c code and make file as attachments. Thank you for your time. > > > > Thanks, > > Jinzhen > > <makefile> > > <mpi_hello_world.c> > > > >> On Oct 2, 2017, at 4:47 PM, Jeremy ***@***.******@***.******@***.******@***.***> ***@***.***>> wrote: > >> > >> Can you send a plain text cut/paste? My virus blocker won't let the picture through. > >> > >> -Jeremy > >> > >> From: Jinzhen Wang ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.***>>> > >> Reply-To: sstsimulator/sst-dumpi ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.***>>> > >> Date: Monday, October 2, 2017 at 1:46 PM > >> To: sstsimulator/sst-dumpi ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.***>>> > >> Cc: "Wilke, Jeremiah J" ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.***>>>, Comment ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.***>>> > >> Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) > >> > >> Thanks, so for my makefiles, should I change it update like this? I am not getting new dumpi log file though. > >> > >> Jinzhen > >> > >> > >> > On Oct 2, 2017, at 4:08 PM, Jeremy ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.***>>> wrote: > >> > > >> > That will depend on your build system. The -ldumpi goes in LIBS and -L... goes in LDFLAGS for Makefiles. CMake is a little different. > >> > > >> > -Jeremy > >> > > >> > From: Jinzhen Wang ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > >> > Reply-To: sstsimulator/sst-dumpi ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > >> > Date: Monday, October 2, 2017 at 1:07 PM > >> > To: sstsimulator/sst-dumpi ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > >> > Cc: "Wilke, Jeremiah J" ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>>, Comment ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > >> > Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) > >> > > >> > Thank you Jeremy, I didn’t realize that glibtoolize and autoreconf are packages that I should install. May I follow up another question that is: after I run ./bootstrap.sh to install dumpi library, where should I add -L$(PATH_TO_DUMPI) -ldumpi to link dumpi library to mpi calls? > >> > > >> > Thanks, > >> > Jinzhen > >> > > On Oct 2, 2017, at 3:56 PM, Jeremy ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> wrote: > >> > > > >> > > You do not have autoconf installed or libtool installed on your system. You can build from the tarball - but you will at least need automake for this. > >> > > These are common packages and should be easy to install with whatever package manger you have on your system. > >> > > > >> > > 1) autoconf > >> > > 2) automake > >> > > 3) libtool > >> > > > >> > > -Jeremy > >> > > > >> > > From: Jinzhen Wang ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > >> > > Reply-To: sstsimulator/sst-dumpi ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > >> > > Date: Monday, October 2, 2017 at 12:53 PM > >> > > To: sstsimulator/sst-dumpi ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > >> > > Cc: Subscribed ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > >> > > Subject: [EXTERNAL] [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) > >> > > > >> > > > >> > > Hi, > >> > > > >> > > I am trying to install dumpi library when I encountered the problem. When I cloned the git and was tryign to run ./bootstrap.sh, the terminal prompted an error saying > >> > > > >> > > ./bootstrap.sh: 14: ./bootstrap.sh: glibtoolize: not found > >> > > ./bootstrap.sh: 15: ./bootstrap.sh: autoreconf: not found > >> > > > >> > > I am wondering how did it happen and how to solve it. > >> > > > >> > > Thanks, > >> > > > >> > > — > >> > > You are receiving this because you are subscribed to this thread. > >> > > Reply to this email directly, view it on GitHub<#7 <#7>>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2U6zo1WerAL094gVzGU8VKt8ZuBCks5soT9MgaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/AAGh2U6zo1WerAL094gVzGU8VKt8ZuBCks5soT9MgaJpZM4PrKUE>>. > >> > > — > >> > > You are receiving this because you authored the thread. > >> > > Reply to this email directly, view it on GitHub <#7 (comment) <#7 (comment)>>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWHMUIqbhvZ2qa_f7jqBTFnDKcRu8ks5soT_egaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/ATqYWHMUIqbhvZ2qa_f7jqBTFnDKcRu8ks5soT_egaJpZM4PrKUE>>. > >> > > > >> > > >> > > >> > — > >> > You are receiving this because you commented. > >> > Reply to this email directly, view it on GitHub<#7 (comment) <#7 (comment)>>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2f7W3153L3R1UdieyxOrerJJDPGxks5soUJ1gaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/AAGh2f7W3153L3R1UdieyxOrerJJDPGxks5soUJ1gaJpZM4PrKUE>>. > >> > — > >> > You are receiving this because you authored the thread. > >> > Reply to this email directly, view it on GitHub <#7 (comment) <#7 (comment)>>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWGzMhXQDCN-bhoKDXV7DjeBrXOXxks5soULUgaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/ATqYWGzMhXQDCN-bhoKDXV7DjeBrXOXxks5soULUgaJpZM4PrKUE>>. > >> > > >> > >> > >> — > >> You are receiving this because you commented. > >> Reply to this email directly, view it on GitHub<#7 (comment) <#7 (comment)>>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2eu56Wv7Z_lgsBoAWvcWx1mt-4Leks5soUuMgaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/AAGh2eu56Wv7Z_lgsBoAWvcWx1mt-4Leks5soUuMgaJpZM4PrKUE>>. > >> — > >> You are receiving this because you authored the thread. > >> Reply to this email directly, view it on GitHub <#7 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWAKl2hElY2htQCV6tzpDr9Uj4re5ks5soUvhgaJpZM4PrKUE>. > >> > > > > > — > You are receiving this because you commented. > Reply to this email directly, view it on GitHub<#7 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2aFG3qH5ButmXFcwrD23jkPxjDhwks5soVclgaJpZM4PrKUE>. > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub <#7 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWBVXRCoEDbtymIyZXmlSWV4_BEDrks5soVhAgaJpZM4PrKUE>. > — You are receiving this because you commented. Reply to this email directly, view it on GitHub<#7 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2XgTeq67nFOZrrA6X-8npuhFOxMZks5soVtKgaJpZM4PrKUE>. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#7 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWDyoRVvYf2XboZsWX7V7dyZXPhpzks5soV6qgaJpZM4PrKUE>.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub<#7 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2Tq1p-aAimz6MvNX6DMiEdUnln-Bks5soWYUgaJpZM4PrKUE>.

[jw447]

Okay, I think I can figure that part out. I really appreciate your help. Thank you very much! Jinzhen

…

On Oct 2, 2017, at 6:43 PM, Jeremy ***@***.***> wrote: You'll likely want to review the basics of configure scripts, installation to prefix directory, makefiles, etc. This is not documented in DUMPI since these are standard tools with documentation elsewhere. If there's someone you work with who is familiar with CMake/configure scripts that can help you get started, that would be good. -Jeremy From: Jinzhen Wang ***@***.******@***.***>> Reply-To: sstsimulator/sst-dumpi ***@***.******@***.***>> Date: Monday, October 2, 2017 at 3:39 PM To: sstsimulator/sst-dumpi ***@***.******@***.***>> Cc: "Wilke, Jeremiah J" ***@***.******@***.***>>, Comment ***@***.******@***.***>> Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) Should I run “make install” after ‘./bootstrap.sh’? I am not sure since it is not indicated in the instruction. ThankS, Jinzhen > On Oct 2, 2017, at 6:07 PM, Jeremy ***@***.******@***.***>> wrote: > > Did you run 'make install'? > > From: Jinzhen Wang ***@***.******@***.******@***.***>> > Reply-To: sstsimulator/sst-dumpi ***@***.******@***.******@***.***>> > Date: Monday, October 2, 2017 at 2:53 PM > To: sstsimulator/sst-dumpi ***@***.******@***.******@***.***>> > Cc: "Wilke, Jeremiah J" ***@***.******@***.******@***.***>>, Comment ***@***.******@***.******@***.***>> > Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) > > The ssh-dumpi folder does not have the lib though. I git clone it from: https://github.com/sstsimulator/sst-dumpi <https://github.com/sstsimulator/sst-dumpi> > > > On Oct 2, 2017, at 5:40 PM, Jeremy ***@***.******@***.******@***.***>> wrote: > > > > Correct. > > > > But I think LDFLAGS should be: > > > > -L/home/jon/sst-dumpi/lib > > > > -Jeremy > > > > From: Jinzhen Wang ***@***.******@***.******@***.******@***.***>> > > Reply-To: sstsimulator/sst-dumpi ***@***.******@***.******@***.******@***.***>> > > Date: Monday, October 2, 2017 at 2:35 PM > > To: sstsimulator/sst-dumpi ***@***.******@***.******@***.******@***.***>> > > Cc: "Wilke, Jeremiah J" ***@***.******@***.******@***.******@***.***>>, Comment ***@***.******@***.******@***.******@***.***>> > > Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) > > > > Make file: > > > > EXECS=mpi_hello_world > > MPICC?=mpicc > > LDFLAGS=-L$(/home/jon/sst-dumpi) > > LIBS=-ldumpi > > all: ${EXECS} > > > > mpi_hello_world: mpi_hello_world.c > > ${MPICC} -o mpi_hello_world mpi_hello_world.c > > > > clean: > > rm -f ${EXECS} > > > > > > > On Oct 2, 2017, at 4:57 PM, Jinzhen Wang ***@***.******@***.******@***.******@***.***>> wrote: > > > > > > I am forwarding my c code and make file as attachments. Thank you for your time. > > > > > > Thanks, > > > Jinzhen > > > <makefile> > > > <mpi_hello_world.c> > > > > > >> On Oct 2, 2017, at 4:47 PM, Jeremy ***@***.******@***.******@***.******@***.***> ***@***.***>> wrote: > > >> > > >> Can you send a plain text cut/paste? My virus blocker won't let the picture through. > > >> > > >> -Jeremy > > >> > > >> From: Jinzhen Wang ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.***>>> > > >> Reply-To: sstsimulator/sst-dumpi ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.***>>> > > >> Date: Monday, October 2, 2017 at 1:46 PM > > >> To: sstsimulator/sst-dumpi ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.***>>> > > >> Cc: "Wilke, Jeremiah J" ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.***>>>, Comment ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.***>>> > > >> Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) > > >> > > >> Thanks, so for my makefiles, should I change it update like this? I am not getting new dumpi log file though. > > >> > > >> Jinzhen > > >> > > >> > > >> > On Oct 2, 2017, at 4:08 PM, Jeremy ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.***>>> wrote: > > >> > > > >> > That will depend on your build system. The -ldumpi goes in LIBS and -L... goes in LDFLAGS for Makefiles. CMake is a little different. > > >> > > > >> > -Jeremy > > >> > > > >> > From: Jinzhen Wang ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > > >> > Reply-To: sstsimulator/sst-dumpi ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > > >> > Date: Monday, October 2, 2017 at 1:07 PM > > >> > To: sstsimulator/sst-dumpi ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > > >> > Cc: "Wilke, Jeremiah J" ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>>, Comment ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > > >> > Subject: [EXTERNAL] Re: [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) > > >> > > > >> > Thank you Jeremy, I didn’t realize that glibtoolize and autoreconf are packages that I should install. May I follow up another question that is: after I run ./bootstrap.sh to install dumpi library, where should I add -L$(PATH_TO_DUMPI) -ldumpi to link dumpi library to mpi calls? > > >> > > > >> > Thanks, > > >> > Jinzhen > > >> > > On Oct 2, 2017, at 3:56 PM, Jeremy ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> wrote: > > >> > > > > >> > > You do not have autoconf installed or libtool installed on your system. You can build from the tarball - but you will at least need automake for this. > > >> > > These are common packages and should be easy to install with whatever package manger you have on your system. > > >> > > > > >> > > 1) autoconf > > >> > > 2) automake > > >> > > 3) libtool > > >> > > > > >> > > -Jeremy > > >> > > > > >> > > From: Jinzhen Wang ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > > >> > > Reply-To: sstsimulator/sst-dumpi ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > > >> > > Date: Monday, October 2, 2017 at 12:53 PM > > >> > > To: sstsimulator/sst-dumpi ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > > >> > > Cc: Subscribed ***@***.******@***.******@***.******@***.***> ***@***.******@***.*** ***@***.******@***.*** ***@***.******@***.*** ***@***.***>>> > > >> > > Subject: [EXTERNAL] [sstsimulator/sst-dumpi] Install DUMPI libaray (#7) > > >> > > > > >> > > > > >> > > Hi, > > >> > > > > >> > > I am trying to install dumpi library when I encountered the problem. When I cloned the git and was tryign to run ./bootstrap.sh, the terminal prompted an error saying > > >> > > > > >> > > ./bootstrap.sh: 14: ./bootstrap.sh: glibtoolize: not found > > >> > > ./bootstrap.sh: 15: ./bootstrap.sh: autoreconf: not found > > >> > > > > >> > > I am wondering how did it happen and how to solve it. > > >> > > > > >> > > Thanks, > > >> > > > > >> > > — > > >> > > You are receiving this because you are subscribed to this thread. > > >> > > Reply to this email directly, view it on GitHub<#7 <#7>>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2U6zo1WerAL094gVzGU8VKt8ZuBCks5soT9MgaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/AAGh2U6zo1WerAL094gVzGU8VKt8ZuBCks5soT9MgaJpZM4PrKUE>>. > > >> > > — > > >> > > You are receiving this because you authored the thread. > > >> > > Reply to this email directly, view it on GitHub <#7 (comment) <#7 (comment)>>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWHMUIqbhvZ2qa_f7jqBTFnDKcRu8ks5soT_egaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/ATqYWHMUIqbhvZ2qa_f7jqBTFnDKcRu8ks5soT_egaJpZM4PrKUE>>. > > >> > > > > >> > > > >> > > > >> > — > > >> > You are receiving this because you commented. > > >> > Reply to this email directly, view it on GitHub<#7 (comment) <#7 (comment)>>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2f7W3153L3R1UdieyxOrerJJDPGxks5soUJ1gaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/AAGh2f7W3153L3R1UdieyxOrerJJDPGxks5soUJ1gaJpZM4PrKUE>>. > > >> > — > > >> > You are receiving this because you authored the thread. > > >> > Reply to this email directly, view it on GitHub <#7 (comment) <#7 (comment)>>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWGzMhXQDCN-bhoKDXV7DjeBrXOXxks5soULUgaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/ATqYWGzMhXQDCN-bhoKDXV7DjeBrXOXxks5soULUgaJpZM4PrKUE>>. > > >> > > > >> > > >> > > >> — > > >> You are receiving this because you commented. > > >> Reply to this email directly, view it on GitHub<#7 (comment) <#7 (comment)>>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2eu56Wv7Z_lgsBoAWvcWx1mt-4Leks5soUuMgaJpZM4PrKUE <https://github.com/notifications/unsubscribe-auth/AAGh2eu56Wv7Z_lgsBoAWvcWx1mt-4Leks5soUuMgaJpZM4PrKUE>>. > > >> — > > >> You are receiving this because you authored the thread. > > >> Reply to this email directly, view it on GitHub <#7 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWAKl2hElY2htQCV6tzpDr9Uj4re5ks5soUvhgaJpZM4PrKUE>. > > >> > > > > > > > > > — > > You are receiving this because you commented. > > Reply to this email directly, view it on GitHub<#7 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2aFG3qH5ButmXFcwrD23jkPxjDhwks5soVclgaJpZM4PrKUE>. > > — > > You are receiving this because you authored the thread. > > Reply to this email directly, view it on GitHub <#7 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWBVXRCoEDbtymIyZXmlSWV4_BEDrks5soVhAgaJpZM4PrKUE>. > > > > > — > You are receiving this because you commented. > Reply to this email directly, view it on GitHub<#7 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2XgTeq67nFOZrrA6X-8npuhFOxMZks5soVtKgaJpZM4PrKUE>. > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub <#7 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWDyoRVvYf2XboZsWX7V7dyZXPhpzks5soV6qgaJpZM4PrKUE>. > — You are receiving this because you commented. Reply to this email directly, view it on GitHub<#7 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AAGh2Tq1p-aAimz6MvNX6DMiEdUnln-Bks5soWYUgaJpZM4PrKUE>. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#7 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATqYWIr3HoYRYK373VxqppSUmmTPZfHTks5soWb_gaJpZM4PrKUE>.

[jw447]

Hi, I think I have another problem.
I followed the exact instruction of using DUMPI from SST Macro 7.1.0.

dumpi > ./ bootstrap .sh
dumpi /build > ../ configure CC= mpicc CXX = mpicxx --enable - libdumpi -- prefix = $DUMPI_PATH
make
make install

when I ran the 'make' and 'make install', the error message is:

So please let me know where I did wrong.

Thank you!

error.txt