Can't flash OpenLog Qwiic about qwiic_openlog

[nseidle]

Just to be sure - did you get the Qwiic OpenLog from us? It's happened a few times where derivatives from other mfgs neglect/forget the bootloader.

The board should have a regular Uno/Optiboot bootloader preloaded onto the board. Be sure nothing else is connected to the board except your FTDI. Sounds like your already at 3.3V on the FTDI (good). Try loading the basic blink sketch onto OpenLog. The Stat pin is pin 13 so the default BLINK sketch should work.

[Stefal]

I bought it from Digikey

I can't flash the Blink sketch, I receive the same "not responding" error.

BTW : In all cases, when I start to upload the sketch, I see some activity on the FTDI adapter.

Thank you for your answer

[AndyEngland521]

@Stefal I've pulled an OpenLog and FTDI from stock and can't seem to reproduce your issue... I'd recommend maybe the AVR Pocket Programmer to re-flash things, as this will neglect any lack of bootloader from a third party.