Problem with ZX_Spectrum-128K and DivMMC + ESXDOS about zx_spectrum-128k_mist

[gyurco]

Probably garbage left in RAM. Try to hold SPACE while resetting the Speccy to reinitialize ESXDOS.

[micv2]

Sorry, unfortunately it doesn't work with Space. A minute is excessive, if I turn off MiST and wait 15 seconds, I can load the zx core again with ESXDOS.

[gyurco]

It works for me. If you hold space, and then press reset, then it won't work. Just press reset, then press space, hold it, and release reset.

[micv2]

Hi, this reset with the space key doesn't work for me, probably because I'm using a wireless keyboard. Couldn't the firmware (global) do it that way? Greetings, MiC

Edit: I also tried it with a USB keyboard, without success, ESXDOS does not again load. Not until I switch MiST off for 15 seconds.. It doesn't matter, if it's necessary I'll wait.. ;)

[gyurco]

The firmware nothing to do with this (I hope you used the core reset, not the ARM reset button).
ESXDOS works this way - holding SPACE when booting will reinitialize itself.

[micv2]

With core button it works, I pressed the board reset button. Sorry, my mistake. With the core and space key, ESXDOS can be restarted, thanks gyurco :)