William Mulreed's Projects
An imbedded, easy to use, debug tool for M5Stack devices.
The Blooket Hack
Cookie Clicker source code for... educational purposes...
A add on for HomeAssistant that makes/ helps with indoor lightshows.
Klipper is a 3d-printer firmware with a special linker for the Anycubic Kobra 2 Neo, courtesy of https://klipper.discourse.group/u/kvgx12/summary
A driver to allow the use of KlipperScreen on printer screens with a builtin encoder and no touchscreen.
A piece of code used to guide an M5RoverC Pro towards a destination.
A Demo for the M5Stack PUSH-6060 module that uses the M5Stack Core2, and M5Stack ISO485 to connect to the PUSH-6060 module.
A small set of python programs that show the M5Station's full potential.
A piece of firmware for M5Core devices that load, and dual boot code from SD cards.
An improved way to control a DJI/Ryze Tello Drone with M5Stack Uiflow.
A simple fork of z4gunn's RGB addon for octoprint with support for 5v common anode LED strips that are connected directly to the Raspberry Pi GPIO header.
A RGB test/demo for the M5Core2’s GO2 battery bottom.
A simple test website to ensure that wil-sys.github.io links for robotics are not blocked.
A small python script to use the touchscreen mode of the BTT TFT35 E3 (and possibly other BTT Serial TFT Displays) with Klipper via Raspberry Pi GPIO pins and Moonraker API Requests.
A Python script to translate BTT TFTxx series RS232 messages to klipper via raspberry pi serial and Klipper’ WebSocket API
A JavaScript program meant to run on chromebooks to bypass goguardian at the internet level. WIP
Config files for my GitHub profile.