error when I try to upload file? about espbuddy

[soif]

Is OTA enabled in ESPeasy advanced settings ?

[lpt2007]

Hi,

I don't have OTA in advance settings only this:

Subscribe Template:
Publish Template:
Message Delay (ms):
Fixed IP Octet:
Use NTP:
NTP Hostname:
Timezone Offset: (Minutes)
DST:
Syslog IP:
Syslog Level:
UDP port:
Enable Serial port:
Serial log Level:
Web log Level:
Baud Rate:
WD I2C Address:
Custom CSS:
Use SSDP:
Connection Failure Threshold:
Rules:

I2C ClockStretchLimit: |  
Global Sync: |  

[soif]

you have to build a v2.0 firmware, with OTA enabled (FEATURE_ARDUINO_OTA)

[lpt2007]

How?

My firmware version is:

Build:	120
Core Version:	2_3_0

[soif]

it must be build with FEATURE_ARDUINO_OTA defined, which is NOT defined by default !
Did you do it?

[lpt2007]

I already do manual ota upgrade to 2.3.0 build 120. I just wana upgrade espeasy to mega but file is to big. Can I do manual upgrade in two steps first "ESPEasyUploader.OTA.1m128.esp8266.bin" then normal firmwarea?

[Andrey2509]

Size of the first flash image is too big (288 kb). I have only 212 kb free.

Firmware
--
Build | 20101  - Mega (ESP82xx Core 2_4_0)
GIT version | mega-20180421
Plugins | 47 [Normal]
Build Md5 | a826642d5534b9f99d7f3d9f4a1c14d1
Md5 check | passed.
Build time | Apr 21 2018 02:01:55
Binary filename | firmware.bin
ESP board
ESP Chip ID | 916988 (0xDFDFC)
ESP Chip Freq: | 80 MHz
Storage
Flash Chip ID | Vendor: 0x5E Device: 0x4014
Flash Chip Real Size: | 1024 kB
Flash IDE Size: | 1024 kB
Flash IDE speed: | 40 MHz
Flash IDE mode: | DOUT
Flash Writes | 0 daily / 2 boot
Sketch Size | 662 kB (212 kB free)