Comments (7)
@0x5ECF4ULT It's always better to open a new issue if one is already closed :)
I'll need a little more information, such as:
- Which image version did you use (
dev
orstable
)? - Are you using
docker-compose
? - Have you tried with the default configuration file?
As mentioned above, having the lang
option set to fr_fr
into the mycroft.conf
broke the pairing and the initialization process for reasons that I don't know (I raised the point on Mycroft chat).
Even after removed the lang
option, I had to delete the volumes (certainly due to some failed steps during the previous try with the lang
option) and re-run the process.
from docker-mycroft.
Yep purging the volumes did the trick. I am now running on Docker swarm with only the bus and skill_repo. Thanks for your suggestion!
from docker-mycroft.
2021-03-16 01:15:40.348 | WARNING | 1 | mycroft.messagebus.client.client:emit:168 | Could not send register_vocab message because connection has been closed
2021-03-16 01:15:40.351 | WARNING | 1 | mycroft.messagebus.client.client:emit:168 | Could not send register_vocab message because connection has been closed
2021-03-16 01:15:40.354 | WARNING | 1 | mycroft.messagebus.client.client:emit:168 | Could not send register_intent message because connection has been closed
2021-03-16 01:15:40.356 | DEBUG | 1 | mycroft.skills.mycroft_skill.event_container:add:146 | Added event: mycroft-singing.mycroftai:handle_sing
2021-03-16 01:15:40.359 | DEBUG | 1 | mycroft.skills.mycroft_skill.event_container:add:146 | Added event: mycroft.sing
2021-03-16 01:15:40.361 | WARNING | 1 | mycroft.messagebus.client.client:emit:168 | Could not send mycroft.skills.loaded message because connection has been closed
2021-03-16 01:15:40.363 | INFO | 1 | mycroft.skills.skill_loader:_communicate_load_status:344 | Skill mycroft-singing.mycroftai loaded successfully
2021-03-16 01:15:40.364 | INFO | 1 | mycroft.skills.skill_manager:_load_on_startup:274 | Skills all loaded!
2021-03-16 01:15:40.366 | WARNING | 1 | mycroft.messagebus.client.client:emit:168 | Could not send mycroft.skills.initialized message because connection has been closed
2021-03-16 01:15:40.439 | INFO | 1 | __main__:on_ready:185 | Skills service is ready.
2021-03-16 01:15:42.445 | INFO | 1 | mycroft.messagebus.client.client:on_open:114 | Connected
from docker-mycroft.
Solution
Remove the lang
option from mycroft.conf
configuration file, or make sure the lang
option is set to en-us
.
from docker-mycroft.
Unfortunately I have to reopen this issue because it still persists (pairing code not showing up in the logs) on my deployment.
I managed to shrink it down to the bus, skills and cli container (the latter isn't needed tho). I did this because I want other devices to communicate to the ws:// and not the host to itself. Another interesting thing is that the "pair my device" command doesn't do anything.
Anyways... Here is a debug log of my deployment:
2021-05-15 11:47:48.490 | DEBUG | 1 | msm.skill_entry | Attempting to retrieve the remote origin URL config for skill in path /opt/mycroft/skills/mycroft-pairing.mycroftai,
2021-05-15 11:47:48.491 | DEBUG | 1 | git.cmd | Popen(['git', 'config', 'remote.origin.url'], cwd=/opt/mycroft/skills/mycroft-pairing.mycroftai, universal_newlines=False, shell=None, istream=None),
2021-05-15 11:47:48.850 | DEBUG | 1 | msm.skill_entry | Generating skill_gid for mycroft-pairing,
2021-05-15 11:47:48.851 | DEBUG | 1 | git.cmd | Popen(['git', 'status', '--porcelain', '--untracked-files=no'], cwd=/opt/mycroft/skills/mycroft-pairing.mycroftai, universal_newlines=False, shell=None, istream=None),
2021-05-15 11:47:48.868 | DEBUG | 1 | git.cmd | Popen(['git', 'rev-parse', 'HEAD'], cwd=/opt/mycroft/skills/mycroft-pairing.mycroftai, universal_newlines=False, shell=None, istream=None),
2021-05-15 11:47:50.033 | INFO | 1 | mycroft.skills.skill_loader:load:185 | ATTEMPTING TO LOAD SKILL: mycroft-pairing.mycroftai,
2021-05-15 11:47:50.051 | INFO | 1 | mycroft.skills.settings:get_local_settings:83 | /home/mycroft/.config/mycroft/skills/mycroft-pairing.mycroftai/settings.json,
2021-05-15 11:47:50.076 | DEBUG | 1 | mycroft.skills.mycroft_skill.event_container:add:146 | Added event: mycroft-pairing.mycroftai.set,
2021-05-15 11:47:50.089 | DEBUG | 1 | mycroft.skills.mycroft_skill.event_container:add:146 | Added event: mycroft-pairing.mycroftai:PairingIntent,
2021-05-15 11:47:50.093 | DEBUG | 1 | mycroft.skills.mycroft_skill.event_container:add:146 | Added event: mycroft.not.paired,
2021-05-15 11:47:50.107 | INFO | 1 | mycroft.skills.skill_loader:_communicate_load_status:344 | Skill mycroft-pairing.mycroftai loaded successfully,
2021-05-15 11:47:56.597 | INFO | 1 | __main__:_ensure_device_is_paired:131 | Device not paired, invoking the pairing skill,
2021-05-15 11:47:56.624 | DEBUG | 1 | mycroft.skills.intent_service:_normalize_all_utterances:73 | Utterances: [('pair my device',)],
2021-05-15 11:47:57.185 | DEBUG | 1 | PairingSkill | Kicking off pairing sequence,
2021-05-15 11:48:57.750 | WARNING | 1 | ConfigurationSkill | Impossible to update configuration because device isn't paired,
2021-05-15 11:49:57.836 | WARNING | 1 | ConfigurationSkill | Impossible to update configuration because device isn't paired
This is all I get. Maybe the skill can be configured to output the code to the logs?
I tried following your solution with no success. Here is what I customized:
{
"websocket": {
"host": "mycroft_bus",
"port": 8181,
"route": "/core",
"ssl": false
},
"log_level": "DEBUG"
}
from docker-mycroft.
Thanks for your quick answer!
- I'm running on
stable
- Not exactly. I got swarm running but configured all services to only run on the master node.
- Yep I did. Same issue.
Tbh I did not try that one. I will delete the vols and ping back.
from docker-mycroft.
Yep purging the volumes did the trick. I am now running on Docker swarm with only the bus and skill_repo. Thanks for your suggestion!
Awesome!
from docker-mycroft.
Related Issues (20)
- Implement precise-lite listener HOT 1
- [Errno 13] Permission denied: '/home/mycroft/.config/mycroft/skills HOT 1
- error: can't find Rust compiler HOT 1
- Make /tmp/mycroft/ipc a bind mount HOT 1
- run.sh syntax errors HOT 1
- No such file or directory when playing sound
- FileNotFoundError: [Errno 2] No such file or directory: 'arecord': 'arecord'
- FileNotFoundError(2, "No such file or directory: 'paplay'"
- Add timezone support HOT 1
- Allow pi user to use OpenGL HOT 1
- web_cache.json path changed
- /opt/mycroft/preloaded_cache/Mimic2 is missing HOT 1
- Add documentation about IPTables
- Use --ipc=host for Docker HOT 1
- Failed to create: /opt/mycroft/voices
- Mimic3 Error HOT 6
- Persistency required for Mimic3 voices
- Getting Mimic3 working with these containers HOT 4
- Permissions denied /tmp HOT 3
- No ability to customize the local volume folders except editing the files manually
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from docker-mycroft.