CMakeLists in data missing about cv2cg

[GoogleCodeExporter]

Don't suppose anyone has figure this out have they? Still trying to get it to 
work myself.

Original comment by [email protected] on 30 Nov 2013 at 3:45

[GoogleCodeExporter]

Hi Andy,

Which version are you trying on? I think this problem was very old... If you 
are trying to use apriltags, then you can simply download the newest apriltags 
branch as I mentioned in the homepage of the project.

Sorry for the bad documentation here, but I am working on my PhD prelim now. 
Once that is done I should be able to improve the documentation...

Thanks for your interests.

Best,
Chen

Original comment by simba.forrest on 30 Nov 2013 at 3:49

[GoogleCodeExporter]

Hi Chen,

Thank you for your reply! I take it you mean apriltagsv2 branch? Good luck with 
your PhD prelims!

Andy

Original comment by [email protected] on 16 Dec 2013 at 1:10

[GoogleCodeExporter]

Actually if you could point me in the direction of how you go it to lock on to 
the tags so well, that may be all I need to go in the right direction. I have 
detection which creates a 3D cube, but seem to have a lot of noise from fake 
detections. Any thoughts? Again thank you in advance.

All the best,
Andy 

Original comment by [email protected] on 16 Dec 2013 at 10:29