sbcshop,SB Components,github

1.14-lcd-breakout-hardware

The 1.14” LCD breakout is colorful and easy to experiment with graphics. The display is of 240x135 resolution, IPS display, and 65k RGB colors to create a colorful user interface for your project. The breakout can be powered with 5V or 3.3V, making it versatile with any controller or processor board like Arduino, Raspberry Pi, Pico, STM32, Rock Pi,

1.14-lcd-breakout-software

1.14 inch LCD Breakout is a 1.14-inch display breakout with a resolution of 240 135 pixels, 65K RGB colours, and a crisp and colorful showing effect, built specifically for cross-platform.

1.28-round-lcd-breakout-hardware

The 1.28” Round LCD breakout is colorful and easy to experiment with graphics. The display is of 240x240 resolution, IPS display, and 65k RGB colors to create a colorful user interface for your project.

1.28-round-lcd-breakout-software

Pico 1.28” Round LCD HAT is a 1.28-inch display HAT with 240 x 240 resolution, 65K RGB colors, clear and colorful displaying effect, and a joystick, designed for the Raspberry Pi Pico to expand its engagement via SPI communication by providing a standard 40 pin Pico GPIO interface.

1.3-lcd-breakout-hardware

The 1.3” LCD breakout is colorful and easy to experiment with graphics. The display is of 240x240 resolution, IPS display, and 65k RGB colors to create a colorful user interface for your project. The breakout can be powered with 5V or 3.3V, making it versatile with any controller or processor board like Arduino, Raspberry Pi, Pico, STM32, Rock Pi,

1.3-lcd-breakout-software

1.3inch LCD breakout Module for microcontrollers eg: Raspberry pi, Arduino and raspberry pi pico etc. it has , 65K Colors, 240×240, supports SPI protocol

1.3-lcd-hat

1.3” LCD HAT is a 1.3-inch diagonal display HAT with 240 x 240 resolution, 65K RGB colors, clear and colorful displaying effect, Four Push buttons and a joystick, designed for the Raspberry Pi to expand its engagement via SPI communication by providing a standard 40 pin GPIO interface.

1.54-e-paper-breakout

1.54-inch e-paper display is an Active Matrix Electrophoretic Display(AMEPD) with 200*200 resolution respectively, comes with SPI interface.e-paper breakout comes in two variant with the ability to display black-and-white or black-white-red graphics. Without power, your image will persist endlessly - display it, then turn off the electricity. These e-paper display modules don't require any power after they've been updated, and they may even be turned off completely, with the content remaining on the screen indefinitely. These e-ink screen is ideal for solar or battery-powered devices.

1.54-e-paper-hat

1.54-inch e-paper display is an Active Matrix Electrophoretic Display(AMEPD) with 200*200 resolution respectively, comes with SPI interface.e-paper HAT comes in two variant with the ability to display black-and-white or black-white-red graphics. Without power, your image will persist endlessly - display it, then turn off the electricity. These e-paper display modules don't require any power after they've been updated, and they may even be turned off completely, with the content remaining on the screen indefinitely. These e-ink screen is ideal for solar or battery-powered devices.

1.54_lcd_breakout_hardware

The 1.54 TFT LCD breakout is colorful and easy to experiment with graphics. The display is of 240x240 resolution and 65k RGB colors to create a colorful user interface for your project.

1.54_lcd_breakout_software

The 1.54 TFT LCD breakout is colorful and easy to experiment with graphics. The display is of 240x240 resolution and 65k RGB colors to create a colorful user interface for your project.

2.7-e-paper-breakout

2.7-inch e-paper display is an Active Matrix Electrophoretic Display(AMEPD) with 264*176 resolution respectively, comes with SPI interface.e-paper breakout's comes in two variant with the ability to display black-and-white or black-white-red graphics. Without power, your image will persist endlessly - display it, then turn off the electricity. These e-paper display modules don't require any power after they've been updated, and they may even be turned off completely, with the content remaining on the screen indefinitely. These e-ink screen is ideal for solar or battery-powered devices

2.7-e-paper-hat

2.7-inch e-paper display is an Active Matrix Electrophoretic Display(AMEPD) with 264*176 resolution respectively, comes with SPI interface.e-paper HAT comes in two variant with the ability to display black-and-white or black-white-red graphics. Without power, your image will persist endlessly - display it, then turn off the electricity. These e-paper display modules don't require any power after they've been updated, and they may even be turned off completely, with the content remaining on the screen indefinitely. These e-ink screen is ideal for solar or battery-powered devices

2x2_display_esp32_hardware

2x2 Display powered by ESP32 S3 Wroom-1 with two options 1.28" round and 1.54" square for your creative projects. This Github provides hardware design files for 2x2 Display with ESP32.

2x2_display_esp32_software

2x2 Display powered by ESP32 S3 Wroom-1 with two options 1.28" round and 1.54" square for your creative projects. This Github provides getting started instructions for 2x2 Display with ESP32.

2x2_display_picow_hardware

2x2 Display powered by Pico W having two options 1.28" round and 1.54" square for your creative projects. This Github provides hardware design files for 2x2 Display with Pico W.

2x2_display_picow_software

2x2 Display powered by Pico W having two options 1.28" round and 1.54" square for your creative projects. This GitHub provides getting started guide for 2x2 Display with Pico W.

3.2_touchsy_breakout_capacitive_hardware

Touchsy Capacitive Breakout - the perfect display solution for users who prefer using Arduino or other controllers. In this github repo you will find hardware files for 3.2" Touchsy Breakout Capacitive Hardware.

3.2_touchsy_breakout_capacitive_software

3.2" Touchsy Capacitive Breakout - the perfect display solution for users who prefer use their favourite Arduino UNO/Mega/Nano or any other controllers. In this github repo you will find details and getting started guide for 3.2" Touchsy Capacitive Breakout.

3.2_touchsy_breakout_resistive_hardware

Touchsy Resistive Breakout - the perfect display solution for users who prefer using Arduino or other controllers. In this github repo you will find hardware files for 3.2" Touchsy Breakout Resistive Hardware.

3.2_touchsy_breakout_resistive_software

3.2" Touchsy Resistive Breakout - the perfect display solution for users who prefer use their favourite Arduino UNO/Mega/Nano or any other controllers. In this github repo you will find details and getting started guide for 3.2" Touchsy Resistive Breakout.

sbcshop Goto Github PK

Hi there 👋

SB Components's Projects

Recommend Projects

Recommend Topics

Recommend Org