sanduhrs / php-cs-fixer

Analyzes some PHP source code and tries to fix coding standards issues (PSR-1 and PSR-2 compatible)

PHP Coding Standards Fixer

The PHP Coding Standards Fixer tool fixes most issues in your code when you want to follow the PHP coding standards as defined in the PSR-1 and PSR-2 documents.

If you are already using PHP_CodeSniffer to identify coding standards problems in your code, you know that fixing them by hand is tedious, especially on large projects. This tool does the job for you.

Requirements

PHP needs to be a minimum version of PHP 5.3.6.

Installation

Locally

Download the php-cs-fixer.phar file and store it somewhere on your computer.

Globally (manual)

You can run these commands to easily access php-cs-fixer from anywhere on your system:

$ wget http://get.sensiolabs.org/php-cs-fixer.phar -O php-cs-fixer

or with curl:

$ curl http://get.sensiolabs.org/php-cs-fixer.phar -o php-cs-fixer

then:

$ sudo chmod a+x php-cs-fixer
$ sudo mv php-cs-fixer /usr/local/bin/php-cs-fixer

Then, just run php-cs-fixer.

Globally (Composer)

To install PHP-CS-Fixer, install Composer and issue the following command:

$ ./composer.phar global require fabpot/php-cs-fixer

Then, make sure you have ~/.composer/vendor/bin in your PATH, and you're good to go:

export PATH="$PATH:$HOME/.composer/vendor/bin"

Globally (homebrew)

PHP-CS-Fixer is part of the homebrew-php project. Follow the installation instructions at https://github.com/homebrew/homebrew-php if you don't already have it.

$ brew install homebrew/php/php-cs-fixer

Update

Locally

The self-update command tries to update php-cs-fixer itself:

$ php php-cs-fixer.phar self-update

Globally (manual)

You can update php-cs-fixer through this command:

$ sudo php-cs-fixer self-update

Globally (Composer)

You can update php-cs-fixer through this command:

$ ./composer.phar global update fabpot/php-cs-fixer

Globally (homebrew)

You can update php-cs-fixer through this command:

$ brew upgrade php-cs-fixer

Usage

The fix command tries to fix as much coding standards problems as possible on a given file or directory:

php php-cs-fixer.phar fix /path/to/dir
php php-cs-fixer.phar fix /path/to/file

The --verbose option show applied fixers. When using txt format (default one) it will also displays progress notification.

The --level option limits the fixers to apply on the project:

php php-cs-fixer.phar fix /path/to/project --level=psr0
php php-cs-fixer.phar fix /path/to/project --level=psr1
php php-cs-fixer.phar fix /path/to/project --level=psr2
php php-cs-fixer.phar fix /path/to/project --level=symfony

By default, all PSR-2 fixers and some additional ones are run. The "contrib level" fixers cannot be enabled via this option; you should instead set them manually by their name via the --fixers option.

The --fixers option lets you choose the exact fixers to apply (the fixer names must be separated by a comma):

php php-cs-fixer.phar fix /path/to/dir --fixers=linefeed,short_tag,indentation

You can also blacklist the fixers you don't want by placing a dash in front of the fixer name, if this is more convenient, using -name_of_fixer:

php php-cs-fixer.phar fix /path/to/dir --fixers=-short_tag,-indentation

When using combination with exact and blacklist fixers, apply exact fixers along with above blacklisted result:

php php-cs-fixer.phar fix /path/to/dir --fixers=linefeed,-short_tag

A combination of --dry-run and --diff will display summary of proposed fixes, leaving your files unchanged.

The command can also read from standard input, in which case it won't automatically fix anything:

cat foo.php | php php-cs-fixer.phar fix --diff -

Choose from the list of available fixers:

• psr0 [PSR-0]

  Classes must be in a path that matches their namespace, be at least one namespace deep, and the class name should match the file name.

• encoding [PSR-1]

  PHP code MUST use only UTF-8 without BOM (remove BOM).

• short_tag [PSR-1]

  PHP code must use the long <?php ?> tags or the short-echo <?= ?> tags; it must not use the other tag variations.

• braces [PSR-2]

  The body of each structure MUST be enclosed by braces. Braces should be properly placed. Body of braces should be properly indented.

• elseif [PSR-2]

  The keyword elseif should be used instead of else if so that all control keywords looks like single words.

• eof_ending [PSR-2]

  A file must always end with a single empty line feed.

• function_call_space [PSR-2]

  When making a method or function call, there MUST NOT be a space between the method or function name and the opening parenthesis.

• function_declaration [PSR-2]

  Spaces should be properly placed in a function declaration.

• indentation [PSR-2]

  Code MUST use an indent of 4 spaces, and MUST NOT use tabs for indenting.

• line_after_namespace [PSR-2]

  There MUST be one blank line after the namespace declaration.

• linefeed [PSR-2]

  All PHP files must use the Unix LF (linefeed) line ending.

• lowercase_constants [PSR-2]

  The PHP constants true, false, and null MUST be in lower case.

• lowercase_keywords [PSR-2]

  PHP keywords MUST be in lower case.

• method_argument_space [PSR-2]

  In method arguments and method call, there MUST NOT be a space before each comma and there MUST be one space after each comma.

• multiple_use [PSR-2]

  There MUST be one use keyword per declaration.

• parenthesis [PSR-2]

  There MUST NOT be a space after the opening parenthesis. There MUST NOT be a space before the closing parenthesis.

• php_closing_tag [PSR-2]

  The closing ?> tag MUST be omitted from files containing only PHP.

• single_line_after_imports [PSR-2]

  Each namespace use MUST go on its own line and there MUST be one blank line after the use statements block.

• trailing_spaces [PSR-2]

  Remove trailing whitespace at the end of non-blank lines.

• visibility [PSR-2]

  Visibility MUST be declared on all properties and methods; abstract and final MUST be declared before the visibility; static MUST be declared after the visibility.

• array_element_no_space_before_comma [symfony]

  In array declaration, there MUST NOT be a whitespace before each comma.

• array_element_white_space_after_comma [symfony]

  In array declaration, there MUST be a whitespace after each comma.

• blankline_after_open_tag [symfony]

  Ensure there is no code on the same line as the PHP open tag and it is followed by a blankline.

• concat_without_spaces [symfony]

  Concatenation should be used without spaces.

• double_arrow_multiline_whitespaces [symfony]

  Operator => should not be surrounded by multi-line whitespaces.

• duplicate_semicolon [symfony]

  Remove duplicated semicolons.

• empty_return [symfony]

  A return statement wishing to return nothing should be simply "return".

• extra_empty_lines [symfony]

  Removes extra empty lines.

• function_typehint_space [symfony]

  Add missing space between function's argument and its typehint.

• include [symfony]

  Include and file path should be divided with a single space. File path should not be placed under brackets.

• join_function [symfony]

  Implode function should be used instead of join function.

• list_commas [symfony]

  Remove trailing commas in list function calls.

• multiline_array_trailing_comma [symfony]

  PHP multi-line arrays should have a trailing comma.

• namespace_no_leading_whitespace [symfony]

  The namespace declaration line shouldn't contain leading whitespace.

• new_with_braces [symfony]

  All instances created with new keyword must be followed by braces.

• no_blank_lines_after_class_opening [symfony]

  There should be no empty lines after class opening brace.

• no_empty_lines_after_phpdocs [symfony]

  There should not be blank lines between docblock and the documented element.

• object_operator [symfony]

  There should not be space before or after object T_OBJECT_OPERATOR.

• operators_spaces [symfony]

  Binary operators should be surrounded by at least one space.

• phpdoc_indent [symfony]

  Docblocks should have the same indentation as the documented subject.

• phpdoc_inline_tag [symfony]

  Fix PHPDoc inline tags, make inheritdoc always inline.

• phpdoc_no_access [symfony]

  @access annotations should be omitted from phpdocs.

• phpdoc_no_empty_return [symfony]

  @return void and @return null annotations should be omitted from phpdocs.

• phpdoc_no_package [symfony]

  @package and @subpackage annotations should be omitted from phpdocs.

• phpdoc_params [symfony]

  All items of the @param, @throws, @return, @var, and @type phpdoc tags must be aligned vertically.

• phpdoc_scalar [symfony]

  Scalar types should always be written in the same form. "int", not "integer"; "bool", not "boolean"; "float", not "real" or "double".

• phpdoc_separation [symfony]

  Annotations in phpdocs should be grouped together so that annotations of the same type immediately follow each other, and annotations of a different type are separated by a single blank line.

• phpdoc_short_description [symfony]

  Phpdocs short descriptions should end in either a full stop, exclamation mark, or question mark.

• phpdoc_to_comment [symfony]

  Docblocks should only be used on structural elements.

• phpdoc_trim [symfony]

  Phpdocs should start and end with content, excluding the very first and last line of the docblocks.

• phpdoc_type_to_var [symfony]

  @type should always be written as @var.

• phpdoc_types [symfony]

  The correct case must be used for standard PHP types in phpdoc.

• phpdoc_var_without_name [symfony]

  @var and @type annotations should not contain the variable name.

• pre_increment [symfony]

  Pre incrementation/decrementation should be used if possible.

• print_to_echo [symfony]

  Converts print language construct to echo if possible.

• remove_leading_slash_use [symfony]

  Remove leading slashes in use clauses.

• remove_lines_between_uses [symfony]

  Removes line breaks between use statements.

• return [symfony]

  An empty line feed should precede a return statement.

• self_accessor [symfony]

  Inside a classy element "self" should be preferred to the class name itself.

• short_bool_cast [symfony]

  Short cast bool using double exclamation mark should not be used.

• single_array_no_trailing_comma [symfony]

  PHP single-line arrays should not have trailing comma.

• single_blank_line_before_namespace [symfony]

  There should be exactly one blank line before a namespace declaration.

• single_quote [symfony]

  Convert double quotes to single quotes for simple strings.

• spaces_before_semicolon [symfony]

  Single-line whitespace before closing semicolon are prohibited.

• spaces_cast [symfony]

  A single space should be between cast and variable.

• standardize_not_equal [symfony]

  Replace all <> with !=.

• ternary_spaces [symfony]

  Standardize spaces around ternary operator.

• trim_array_spaces [symfony]

  Arrays should be formatted like function/method arguments, without leading or trailing single line space.

• unalign_double_arrow [symfony]

  Unalign double arrow symbols.

• unalign_equals [symfony]

  Unalign equals symbols.

• unary_operators_spaces [symfony]

  Unary operators should be placed adjacent to their operands.

• unneeded_control_parentheses [symfony]

  Removes unneeded parentheses around control statements.

• unused_use [symfony]

  Unused use statements must be removed.

• whitespacy_lines [symfony]

  Remove trailing whitespace at the end of blank lines.

• align_double_arrow [contrib]

  Align double arrow symbols in consecutive lines.

• align_equals [contrib]

  Align equals symbols in consecutive lines.

• concat_with_spaces [contrib]

  Concatenation should be used with at least one whitespace around.

• echo_to_print [contrib]

  Converts echo language construct to print if possible.

• ereg_to_preg [contrib]

  Replace deprecated ereg regular expression functions with preg. Warning! This could change code behavior.

• header_comment [contrib]

  Add, replace or remove header comment.

• logical_not_operators_with_spaces [contrib]

  Logical NOT operators (!) should have leading and trailing whitespaces.

• logical_not_operators_with_successor_space [contrib]

  Logical NOT operators (!) should have one trailing whitespace.

• long_array_syntax [contrib]

  Arrays should use the long syntax.

• multiline_spaces_before_semicolon [contrib]

  Multi-line whitespace before closing semicolon are prohibited.

• newline_after_open_tag [contrib]

  Ensure there is no code on the same line as the PHP open tag.

• no_blank_lines_before_namespace [contrib]

  There should be no blank lines before a namespace declaration.

• ordered_use [contrib]

  Ordering use statements.

• php4_constructor [contrib]

  Convert PHP4-style constructors to __construct. Warning! This could change code behavior.

• php_unit_construct [contrib]

  PHPUnit assertion method calls like "->assertSame(true, $foo)" should be written with dedicated method like "->assertTrue($foo)". Warning! This could change code behavior.

• php_unit_strict [contrib]

  PHPUnit methods like "assertSame" should be used instead of "assertEquals". Warning! This could change code behavior.

• phpdoc_order [contrib]

  Annotations in phpdocs should be ordered so that param annotations come first, then throws annotations, then return annotations.

• phpdoc_var_to_type [contrib]

  @var should always be written as @type.

• short_array_syntax [contrib]

  PHP arrays should use the PHP 5.4 short-syntax.

• short_echo_tag [contrib]

  Replace short-echo <?= with long format <?php echo syntax.

• strict [contrib]

  Comparison should be strict. Warning! This could change code behavior.

• strict_param [contrib]

  Functions should be used with $strict param. Warning! This could change code behavior.

The --config option customizes the files to analyse, based on some well-known directory structures:

# For the Symfony 2.3+ branch
php php-cs-fixer.phar fix /path/to/sf23 --config=sf23

Choose from the list of available configurations:

• default A default configuration
• magento The configuration for a Magento application
• sf23 The configuration for the Symfony 2.3+ branch

The --dry-run option displays the files that need to be fixed but without actually modifying them:

php php-cs-fixer.phar fix /path/to/code --dry-run

Instead of using command line options to customize the fixer, you can save the configuration in a .php_cs file in the root directory of your project. The file must return an instance of Symfony\CS\ConfigInterface, which lets you configure the fixers, the level, the files, and directories that need to be analyzed. The example below will add two contrib fixers to the default list of symfony-level fixers:

<?php

$finder = Symfony\CS\Finder\DefaultFinder::create()
    ->exclude('somedir')
    ->in(__DIR__)
;

return Symfony\CS\Config\Config::create()
    ->fixers(array('strict_param', 'short_array_syntax'))
    ->finder($finder)
;

If you want complete control over which fixers you use, you may use the empty level and then specify all fixers to be used:

<?php

$finder = Symfony\CS\Finder\DefaultFinder::create()
    ->in(__DIR__)
;

return Symfony\CS\Config\Config::create()
    ->level(Symfony\CS\FixerInterface::NONE_LEVEL)
    ->fixers(array('trailing_spaces', 'encoding'))
    ->finder($finder)
;

You may also use a blacklist for the Fixers instead of the above shown whitelist approach. The following example shows how to use all symfony Fixers but the psr0 fixer. Note the additional - in front of the Fixer name.

<?php

$finder = Symfony\CS\Finder\DefaultFinder::create()
    ->exclude('somedir')
    ->in(__DIR__)
;

return Symfony\CS\Config\Config::create()
    ->fixers(array('-psr0'))
    ->finder($finder)
;

The symfony level is set by default, you can also change the default level:

<?php

return Symfony\CS\Config\Config::create()
    ->level(Symfony\CS\FixerInterface::PSR2_LEVEL)
;

In combination with these config and command line options, you can choose various usage.

For example, default level is symfony, but if you also don't want to use the psr0 fixer, you can specify the --fixers="-psr0" option.

But if you use the --fixers option with only exact fixers, only those exact fixers are enabled whether or not level is set.

With the --config-file option you can specify the path to the .php_cs file.

Caching

You can enable caching by returning a custom config with caching enabled. This will speed up further runs.

<?php

return Symfony\CS\Config\Config::create()
    ->setUsingCache(true)
;

Helpers

Dedicated plugins exist for:

• Atom
• NetBeans
• PhpStorm
• Sublime Text
• Vim

Contribute

The tool comes with quite a few built-in fixers and finders, but everyone is more than welcome to contribute more of them.

Fixers

A fixer is a class that tries to fix one CS issue (a Fixer class must implement FixerInterface).

Configs

A config knows about the CS level and the files and directories that must be scanned by the tool when run in the directory of your project. It is useful for projects that follow a well-known directory structures (like for Symfony projects for instance).