Comments (3)
i also removed the top cover to all the floppy drives.
from moppy2.
anyone knows how to fix this?
Well it's not a "fix" per se, since quiet/silent drive operation is generally considered a feature (since apparently some people don't like their computers as noisy as possible ;P ). But I get what you meant.
Some various thoughts and findings about amplifying your drive sounds (roughly in order of least to most work):
- I found that my drives are louder without a floppy disk in them (though it's also worth trying to put a disk in to see if yours are louder the other way around).
- Make sure the drives are mounted / sat on a hard smooth surface.
- Try lifting the drive a bit or angling it to allow sound out the other side as well.
- My drives seem to have particular note ranges that they're particularly loud in (usually lower notes). You can try adjusting the music to see if you can find an octave that your drives do better in.
- Attaching SOLO cups like this guy actually seems to do a pretty good job of amplifying the sound.
- Attaching weights to the read head might make the drives louder as they struggle more, but this definitely increases the risk that you might damage the drive.
- Similarly, cleaning off the drive screw with rubbing alcohol to remove any lubricant should in theory make the drives run worse (i.e. louder), but maybe isn't the best for them.
- In theory you could passively amplify the sound in the same way stringed instruments do (e.g. acoustic guitars would be super quiet without their resonating body). I haven't seen this one actually attempted, and there's some interesting research to be done with regards to size and shape (i.e. a closed tube might work for one specific note, but not the rest). Basically you'd mount the drives over some sort of cavity to amplify the sound.
- Moving the microphone closer to the drives will make them appear louder in the recording (this one's sort of obvious, sorry, but even the louder drives aren't that loud)
- I did see someone else manage to use electric pickups to pipe the drive vibrations directly into a soundboard. The kind you clip onto a string bass would probably be idea, but even electric guitar pickups might work since the drive body is metal and the motor is pumping out a little bit of a magnetic field. If you go this route, experiment with different attachment points on the drive.
If I think of anything else today I'll add it to the list, but that should hopefully give you something to go on. Experimenting to figure out what works best for your setup is, unfortunately, probably the way to go.
from moppy2.
Thank you so much! i "fixed" a drive by removing the lubricants on it, i will keep doing this for the other drives.
i usually dont use the disks since i dont have them, but opening the "disk bay" of the floppy drives by grabbing the disk opener and rotating it clockwise.
from moppy2.
Related Issues (20)
- ...Android 🙈 HOT 4
- Windows Java Runtime Error HOT 2
- MoppyGUI wont connect to arduino HOT 2
- Floppy drive doesn't play music or startup tone HOT 13
- Compilation error: 'TIMER_RESOLUTION' was not declared in this scope HOT 7
- Nothing happens HOT 1
- code not compilation HOT 4
- Notes per channels HOT 1
- MoppyControlGUI.bat crashes HOT 10
- Default Sub-Address Script is Wrong
- Флоппи HOT 1
- ControlGUI sends mdi data to serial, board serial led indicates data comes but the floppy motor doesn't move HOT 10
- Startup Sound should default to true HOT 1
- ESP32 support HOT 2
- Issue with MoppyControlGUI HOT 9
- Using without GUI ? HOT 8
- Error when uploading to Arduino R3 HOT 32
- .Bat file not openning correctly HOT 1
- Checking COM port in Network Bridges list causes error - Failed to open serialPort HOT 5
- How to connect fdd to esp8266 HOT 2
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from moppy2.