Toolchain install documentation possibly incomplete? about rosco_m68k

[bzuidgeest]

On https://rosco-m68k.com/docs/building-the-software i found another error.
Both git clone commands did not work on my linux machine (git clone github.com/rosco-m68k/rosco_m68k.git)
They needed to be changed to git clone https://github.com/rosco-m68k/rosco_m68k.git

Also though the github readme warns to switch to a release branch to avoid compile errors, the "building the software" page does not mention this. So I ran into compile errors that went away when I switched to the release/revision-1.2 branch. Assuming that not everyone (Me) is fully used to using git, commands to switch to the correct branch should be included on this page.

[roscopeco]

Thanks for the report @bzuidgeest , will look to get this fixed as soon as possible :)

[roscopeco]

(Finally) fixed. See:

• https://rosco-m68k.com/docs/toolchain-installation
• https://rosco-m68k.com/docs/building-the-software

Apologies for the long lead time on this, thanks again for reporting @bzuidgeest .