RK918 RGB Not Supported about rangoli

[rnayabed]

Please provide vid and pid

[tomma365]

video and product id?

…

On Sun, 16 Jul 2023, 13:33 Debayan Sutradhar, ***@***.***> wrote: Please provide vid and pid — Reply to this email directly, view it on GitHub <#44 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AQ3R6GVCYFWGQWD4ZXKZIMDXQPNSTANCNFSM6AAAAAA2LP2BCE> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[rnayabed]

vendor and product id.. yes

…

On Sun, 16 Jul 2023 at 18:20, tomma365 ***@***.***> wrote: video and product id? On Sun, 16 Jul 2023, 13:33 Debayan Sutradhar, ***@***.***> wrote: > Please provide vid and pid > > — > Reply to this email directly, view it on GitHub > <#44 (comment)>, > or unsubscribe > < https://github.com/notifications/unsubscribe-auth/AQ3R6GVCYFWGQWD4ZXKZIMDXQPNSTANCNFSM6AAAAAA2LP2BCE> > . > You are receiving this because you authored the thread.Message ID: > ***@***.***> > — Reply to this email directly, view it on GitHub <#44 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AGERF5JCQHM3OZTS72BTKC3XQPPSJANCNFSM6AAAAAA2LP2BCE> . You are receiving this because you commented.Message ID: ***@***.***>

[sneexy-boi]

chiming in here because I recently obtained the same keyboard, according to lsusb it's detected as a camera:

Bus 001 Device 007: ID 0c45:8006 Microdia Dual Mode Camera (8006 VGA)

usb-devices reports:

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  9 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0c45 ProdID=8006 Rev=01.66
S:  Manufacturer=SONiX
S:  Product=USB DEVICE
C:  #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=01 Driver=usbhid
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=usbhid
E:  Ad=82(I) Atr=03(Int.) MxPS=  16 Ivl=1m

Software link found here.