Strange sequence behaviour about irrigation_unlimited

[miguelpucela]

I have just observed that zones [2,3] have been activated aprox. 5 minutes after scheduled starting time of a total of 11:30 minutes (8 minutes in config with a 143% multiplier).

I don't know if is somehow related, but in my configuration I forgot to write granularity and refresh_interval:

  granularity: 10
  refresh_interval: 30

[rgc99]

It looks like you have an adjustment automation running. If so did it fire during the sequence run? Logs should help out here. I am thinking that the adjustment service call has interfered with the sequence run. It is not supposed to. I will run some tests on my side.

[miguelpucela]

Yes, I have an adjustment automation. It's run every hour (o'clock), but it was not running at the time the irrigation was failing, as it was fired at 22:21.

I've changed log level to debug, so I can send you something interesting.

[rgc99]

I have been able to reproduce and fix an issue where an adjustment during a running sequence will cause it not to complete. It will truncate the zones that have yet to run. This sounds very similar to the symptoms you are describing.

[miguelpucela]

Great news!
I haven't been able to reproduce it during the last day and a half.

Thank you for your interest!

[rgc99]

Is this issue fixed now?

[miguelpucela]

I think so. During the last months it's irrigating well.
In any case, I won't continue irrigating until next spring.