reprapthailand Goto Github PK

1chip-programmers

Programmers for Attiny and STM32 MCU

3dpburner-sender

A GCODE sender for GRBL based devices

3dpcb

3DPCB DRV8825 files - KiCAD

3dpcb-4layer

This is the 3DPCB with 4 layer PCB. Still needs some fine-tuning and IS NOT TESTED

4_axis_spi_cnc

4 Axis CNC Controller for Grbl_ESP32

6-axis-usbcnc-grbl

This repository is based on https://github.com/usbcnc/grbl which in turn is based on https://github.com/gnea/grbl

a4988-breakout

ac_sc_grinder

Grinder speed control with stable RPM

adapterstick

A4988-DRV8825 Adapter stick for external stepper driver

adelino

Adelino is a dual-microcontroller development board based on ATmega32U4 and ESP8266 (using ESP-12F WiFi module). It’s inspired by Arduino Leonardo and Arduino Yún, with features like Grove support, dual-mode bootloader and multi-stage reset.

air

AIR-V6(ESP32)

air858

Simplified and optimized replacement controller for the low-cost W.E.P. 858D+ Hot Air Soldering Station

ananasstepper

This is a part of a smart Robot control system(AnanasRobot), based on Stepper Motor and CAN bus.This project aims to build a motion control system including hardware and software to make Multi-Axis Gang Control easy and precise, applied to 3D printer, a 6+ axis robot arm or some more complex motion control system.

ananasstepper2.0-hardware

This is the hardware part of AnanasStepper2.0

aquaduino

Arduino-based fishtank control system

ardu-controller

Arduino inspired hand-held controller

arduboy

arduboy with flashcart

arduino-bga-rework-station-controller

Code for Arduino based BGA Rework Station controller using a solid state relay and a k-type thermocouple.

arduino-io-expander

arduino-mdb-uart

Atmega1284 PLC as MDB-UART converter

arduino-morse-code-with-led-and-buzzer

Step by step instructions with explanations to construct an LED and piezo buzzer circuit and program it to communicate SOS and other messages in morse code using Arduino.

arduino-mppt

Arduino based Maximum Power Point Tracking (MPPT) solar charge controller

arduniothc

Arduino-based CNC Plasma torch system Torch Height Controller

arduskybot

Low cost educational printbot based on Arduino

atmega2560

Atmega2560 training projects (AVR assembly / C / freeRTOS)

atmega328p-pu-breakout

Breakout Chip for the Atmega328P-PU

atomcnc

GRBL based controller software

attinypowermeter

avr-isp-pogo-pin-adapter

awesome.tech

awesome.tech download page