Automatic Motor Optimization about openmotor

[reilleya]

This would be fun to play around with! I still use openMotor fairly often but I don't have too much time to work on it. I would be able to find time to review a PR for this if you/someone sent one in, or will keep it in mind for when I someday start on a v0.6.0 if not.

[mvccogo]

Sure, no problem. I'm also short on time, but I thought we should have an issue dedicated to this. I'll try building oM first, get familiar with the program then take a stab at it later on. Thanks, Andrew.

[benrussell11]

I used OM all of the time. Spaceport America teams are also using it. This option would be great to have. I know I would use it. For the 2023 cup, my team is working on designing a booster and sustainer for a 6” 2-stage with an on the pad weight in the 90 lb. range. Interesting to say the least. Ben Russell From: Matheus V. C. Cogo ***@***.***> Sent: Wednesday, December 14, 2022 9:40 PM To: reilleya/openMotor ***@***.***> Cc: Subscribed ***@***.***> Subject: Re: [reilleya/openMotor] Automatic Motor Optimization (Issue #204) Sure, no problem. I'm also short on time, but I thought we should have an issue dedicated to this. I'll try building oM first, get familiar with the program then take a stab at it later on. Thanks, Andrew. — Reply to this email directly, view it on GitHub <#204 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AL4HO6BSWA7XCNPY4YUBSRLWNKAHTANCNFSM6AAAAAAS3PIZQE> . You are receiving this because you are subscribed to this thread. <https://github.com/notifications/beacon/AL4HO6HJOL5NWJCNVPDDVLTWNKAHTA5CNFSM6AAAAAAS3PIZQGWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSQTU5VQ.gif> Message ID: ***@***.*** ***@***.***> >