UHD make failed about openbts

[chrysmur]

Hallo,
The issue could be because transceiver for N210 is not built. Check if the Transceiver52M has been compiled, as i noticed that this Openbts compiles the RAD1 transceiver by default.
If not, from openbts folder try ./configure --with-uhd before make

[Keskebeu]

You have not installed uhd in your system for your radio version and so its not picking it up.

hi, I am having a similar error as above where I got this output when I try to run "sudo ./transceiver" at the cd /OpenBTS. I am using a Raspberry Pi with Unbutu mate 16.04.6 LTS

`openbts@openbts-desktop:/OpenBTS$ sudo ./transceiver
linux; GNU C++ version 5.3.1 20151219; Boost_105800; UHD_003.009.002-0-unknown

Using internal frequency reference
-- Detected Device: B200mini
-- Loading FPGA image: /usr/share/uhd/images/usrp_b200mini_fpga.bin...ALERT 3337:3337 2019-05-17T12:23:14.2 UHDDevice.cpp:557:open: UHD make failed, device type=b200,name=B200mini,serial=3135A13,product=B200mini
ALERT 3337:3337 2019-05-17T12:23:14.2 runTransceiver.cpp:176:main: Transceiver exiting...
`
so i was wondering did you manage to solve this error and how did you solve it ?
I am quite new with OpenBTS so any information will be helpful

thank you.

[Keskebeu]

OpenBTS does not support b200.

…

On Fri, May 17, 2019, 12:35 AM najatzz ***@***.***> wrote: hi, I am having a similar error as above where I got this output when I try to run "sudo ./transceiver" at the cd /OpenBTS. I am using a Raspberry Pi with Unbutu mate 16.04.6 LTS ***@***.***:/OpenBTS$ sudo ./transceiver linux; GNU C++ version 5.3.1 20151219; Boost_105800; UHD_003.009.002-0-unknown Using internal frequency reference -- Detected Device: B200mini -- Loading FPGA image: /usr/share/uhd/images/usrp_b200mini_fpga.bin...ALERT 3337:3337 2019-05-17T12:23:14.2 UHDDevice.cpp:557:open: UHD make failed, device type=b200,name=B200mini,serial=3135A13,product=B200mini ALERT 3337:3337 2019-05-17T12:23:14.2 runTransceiver.cpp:176:main: Transceiver exiting... ` so i was wondering did you manage to solve this error and how did you solve it ? I am quite new with OpenBTS so any information will be helpful thank you. — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#31?email_source=notifications&email_token=AGB7MGEKHLJ57S7QIGZBIZ3PVYYY3A5CNFSM4EBLIZ2KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODVTWQ5I#issuecomment-493316213>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AGB7MGHZ4DP6JZYPND6GMODPVYYY3ANCNFSM4EBLIZ2A> .

[r00tb3]

hi, I am having a similar error as above where I got this output when I try to run "sudo ./transceiver" at the cd /OpenBTS. I am using a Raspberry Pi with Unbutu mate 16.04.6 LTS

`openbts@openbts-desktop:/OpenBTS$ sudo ./transceiver
linux; GNU C++ version 5.3.1 20151219; Boost_105800; UHD_003.009.002-0-unknown

Using internal frequency reference
-- Detected Device: B200mini
-- Loading FPGA image: /usr/share/uhd/images/usrp_b200mini_fpga.bin...ALERT 3337:3337 2019-05-17T12:23:14.2 UHDDevice.cpp:557:open: UHD make failed, device type=b200,name=B200mini,serial=3135A13,product=B200mini
ALERT 3337:3337 2019-05-17T12:23:14.2 runTransceiver.cpp:176:main: Transceiver exiting...
`
so i was wondering did you manage to solve this error and how did you solve it ?
I am quite new with OpenBTS so any information will be helpful

thank you.

Are you able to solve this issue?

I'm stuck at this.

[Keskebeu]

In order for you to use openbts with ettus bus series you have to build the OsmoTRX transceiver on its own. Once you build and install OsmoTRX run that transceiver with the proper config file. Once you start OsmoTRX , you can start OpenBTS. You don't have to run transceiver in openbts in order to start the bts. You can simply start it by running OpenBTS in the apps directory.

…

On Fri, Nov 1, 2019, 7:19 AM Amit Vitekar ***@***.***> wrote: hi, I am having a similar error as above where I got this output when I try to run "sudo ./transceiver" at the cd /OpenBTS. I am using a Raspberry Pi with Unbutu mate 16.04.6 LTS ***@***.***:/OpenBTS$ sudo ./transceiver linux; GNU C++ version 5.3.1 20151219; Boost_105800; UHD_003.009.002-0-unknown Using internal frequency reference -- Detected Device: B200mini -- Loading FPGA image: /usr/share/uhd/images/usrp_b200mini_fpga.bin...ALERT 3337:3337 2019-05-17T12:23:14.2 UHDDevice.cpp:557:open: UHD make failed, device type=b200,name=B200mini,serial=3135A13,product=B200mini ALERT 3337:3337 2019-05-17T12:23:14.2 runTransceiver.cpp:176:main: Transceiver exiting... ` so i was wondering did you manage to solve this error and how did you solve it ? I am quite new with OpenBTS so any information will be helpful thank you. Are you able to solve this issue? I'm stuck at this. — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#31?email_source=notifications&email_token=AGB7MGG3B56IYV7XYIAZ4NDQRQGE7A5CNFSM4EBLIZ2KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEC2VFLA#issuecomment-548754092>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AGB7MGAKFIFTVKT5P4AK2P3QRQGE7ANCNFSM4EBLIZ2A> .

[r00tb3]

In order for you to use openbts with ettus bus series you have to build the OsmoTRX transceiver on its own. Once you build and install OsmoTRX run that transceiver with the proper config file. Once you start OsmoTRX , you can start OpenBTS. You don't have to run transceiver in openbts in order to start the bts. You can simply start it by running OpenBTS in the apps directory.
…
On Fri, Nov 1, 2019, 7:19 AM Amit Vitekar @.> wrote: hi, I am having a similar error as above where I got this output when I try to run "sudo ./transceiver" at the cd /OpenBTS. I am using a Raspberry Pi with Unbutu mate 16.04.6 LTS @.:/OpenBTS$ sudo ./transceiver linux; GNU C++ version 5.3.1 20151219; Boost_105800; UHD_003.009.002-0-unknown Using internal frequency reference -- Detected Device: B200mini -- Loading FPGA image: /usr/share/uhd/images/usrp_b200mini_fpga.bin...ALERT 3337:3337 2019-05-17T12:23:14.2 UHDDevice.cpp:557:open: UHD make failed, device type=b200,name=B200mini,serial=3135A13,product=B200mini ALERT 3337:3337 2019-05-17T12:23:14.2 runTransceiver.cpp:176:main: Transceiver exiting... ` so i was wondering did you manage to solve this error and how did you solve it ? I am quite new with OpenBTS so any information will be helpful thank you. Are you able to solve this issue? I'm stuck at this. — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#31?email_source=notifications&email_token=AGB7MGG3B56IYV7XYIAZ4NDQRQGE7A5CNFSM4EBLIZ2KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEC2VFLA#issuecomment-548754092>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AGB7MGAKFIFTVKT5P4AK2P3QRQGE7ANCNFSM4EBLIZ2A .

Fixed it by freshly installing Ubuntu 16 and manually building and installing the UHD 003.010.003.