Idobao Montex Pad missing about qmk.fm

[iso-hexane]

Anyone know anything about this? The board was supposed to ship with qmk and via support but I can't find either.

[NachoxMacho]

I've gotten a version working in qmk. It's not official but it works: qmk/qmk_firmware#13214

[IBNobody]

@NachoxMacho Does your Montex V1 have full per-key RGB lighting? I wonder if I have a V2 because your build only lights up 4 key RGB LEDs rather than the 27 key LEDs and 4 backlight LEDs.

[NachoxMacho]

@NachoxMacho Does your Montex V1 have full per-key RGB lighting? I wonder if I have a V2 because your build only lights up 4 key RGB LEDs rather than the 27 key LEDs and 4 backlight LEDs.

No, my Montex V1 only has 4 backlight LEDs, and as far as I'm aware that's all the code supports at this point.

[IBNobody]

Good to know. I'll submit a V2 that supports the newer PCB. The V2 expanded the LED underbody lighting to be the per key lighting, and increasing the 4 led define to 27 gave me full lighting.

…

On Tue, Apr 19, 2022, 10:37 AM Rob Owens ***@***.***> wrote: @NachoxMacho <https://github.com/NachoxMacho> Does your Montex V1 have full per-key RGB lighting? I wonder if I have a V2 because your build only lights up 4 key RGB LEDs rather than the 27 key LEDs and 4 backlight LEDs. No, my Montex V1 only has 4 backlight LEDs, and as far as I'm aware that's all the code supports at this point. — Reply to this email directly, view it on GitHub <#130 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABMXTUAMROILNKQDMCVL773VF3HMDANCNFSM44GP2H3A> . You are receiving this because you commented.Message ID: <qmk/qmk. ***@***.***>