C5 and C2 are not connected on the positive side on the board layout about mk3_power_panic

[ok1hra]

Yes you're right, C5 are connected versus the original scheme to the output.
It is does not change detector function.
Thanks for feedback.

[bwattendorf]

Thanks Dan Bruce W1BAW

…

On Wed, Dec 6, 2017 at 3:08 PM, Dan OK1HRA ***@***.***> wrote: Yes you're right, C5 are connected versus the original scheme to the output. It is does not change detector function. Thanks for feedback. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#1 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ABGFab5mOv1puB9W-gra8MHpH9LkPo7Yks5s9vRBgaJpZM4Q4fcR> .

[ok1hra]

I see happy ham radio operator also in comerce contact. CUL on bands Bruce 73, Dan OK1HRA 2017-12-06 21:09 GMT+01:00 bwattendorf <[email protected]>:

…

Thanks Dan Bruce W1BAW On Wed, Dec 6, 2017 at 3:08 PM, Dan OK1HRA ***@***.***> wrote: > Yes you're right, C5 are connected versus the original scheme to the > output. > It is does not change detector function. > Thanks for feedback. > > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub > <#1# issuecomment-349759383>, > or mute the thread > <https://github.com/notifications/unsubscribe-auth/ABGFab5mOv1puB9W- gra8MHpH9LkPo7Yks5s9vRBgaJpZM4Q4fcR> > . > — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#1 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ALeRx0ooyUGU5nBJq7NIS2mn4A1zRYCtks5s9vSTgaJpZM4Q4fcR> .

[bwattendorf]

same here 73

…

On Wed, Dec 6, 2017 at 3:15 PM, Dan OK1HRA ***@***.***> wrote: I see happy ham radio operator also in comerce contact. CUL on bands Bruce 73, Dan OK1HRA Zdraví Dan Pech Prusa Research s.r.o. Partyzánská 188/7a 170 00, Praha 7 2017-12-06 21:09 GMT+01:00 bwattendorf ***@***.***>: > Thanks Dan > > Bruce W1BAW > > On Wed, Dec 6, 2017 at 3:08 PM, Dan OK1HRA ***@***.***> > wrote: > > > Yes you're right, C5 are connected versus the original scheme to the > > output. > > It is does not change detector function. > > Thanks for feedback. > > > > — > > You are receiving this because you authored the thread. > > Reply to this email directly, view it on GitHub > > <#1# > issuecomment-349759383>, > > or mute the thread > > <https://github.com/notifications/unsubscribe-auth/ABGFab5mOv1puB9W- > gra8MHpH9LkPo7Yks5s9vRBgaJpZM4Q4fcR> > > . > > > > — > You are receiving this because you commented. > Reply to this email directly, view it on GitHub > <#1# issuecomment-349759736>, > or mute the thread > <https://github.com/notifications/unsubscribe-auth/ ALeRx0ooyUGU5nBJq7NIS2mn4A1zRYCtks5s9vSTgaJpZM4Q4fcR> > . > — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#1 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ABGFaYcuZtbeb8I0_3LWY2MqGc_Mt45Xks5s9vXJgaJpZM4Q4fcR> .

[bwattendorf]

Closing the issue since it is not a problem

[make-ing]

Hello, i also came across this error (and already opened an issue #5) and it seems very unlikely that this will work the same as described in the schematic. A capacitor (C5) of this size (10µF) will definitely delay the AC_FAULT signal. I hope you will fix either the error in the schematic or in the PCB since i think this will otherwise lead to some more questions and lot of duplicate issue when other people stumble across this inconsistency.

Thanks a lot for the great work so far!

[ok1hra]

yes, will be fixed in next version

[bwattendorf]

Dan do you guys need any Beta testers for the new Multi material upgrade?

[ok1hra]

probably no, sri

[bwattendorf]

Thanks for the Reply

…

On Tue, Mar 27, 2018 at 2:47 PM, Dan OK1HRA ***@***.***> wrote: probably no, sri — You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub <#1 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ABGFaTo7xJR45y3Xxh5Fq1Mvjy1RwolTks5tiok4gaJpZM4Q4fcR> .

[boelle]

how can i fix this now? i mean it must sure be a simple task?