Comments (6)
I'm using firmware V1.4.12_20220711 and I'm getting this same error.
Here are some logs I got in the nodeJS trying to connect to my Camera.
loginReq: {"buf":{"type":"Buffer","data":[143,4,0,0,254,3,0,0,2,1,0,0,0,177,179,212,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,97,100,109,105,110,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,121,50,97,115,68,66,41,100,72,119,48,66,99,61,79,77,100,130,170,99,98,124,49,179,197,181,33,12,240,237,155,47,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]},"off":0}
loginReqData:
{ command: 1167, deviceId: <Buffer 36 34 32 37 31 32 38 31>, unknown1: 1022, unknown2: 2, unknown3: 1, hostDateTime: [], username: <Buffer 61 64 6d 69 6e>, password: <Buffer ---> }
Data Reply: {"type":"Buffer","data":[156,255,255,255,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]}
loginResp: { command: -100, loginResult: 0, resultValue: 0, version: 0, authTicket: 0, session: 0, deviceType: 0, camType: 0, vendorId: 0, isDomainExists: 0, domain: [ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ], recDevId: 0, nChannels: 0, nAudioPri: 0, nVideoPri: 0, nSpeaker: 0, nPtzPri: 0, nReversePri: 0, nPtzXPri: 0, nPtzXCount: 0, settings: [ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ], panoX: 0, panoY: 0, panoRad: 0, unknown1: 0, canUpdateDevice: 0 }
streamStartReq: {"buf":{"type":"Buffer","data":[45,1,0,0,177,179,212,3,0,0,0,0,15,0,0,0,0,0,0,0,0,0,1,16,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]},"off":0}
streamStartData: { command: 303, unknown1: -11 }
RangeError [ERR_OUT_OF_RANGE]: The value of "value" is out of range. It must be >= 0 and <= 4294967295. Received -11 at new NodeError (internal/errors.js:322:7) at checkInt (internal/buffer.js:71:11) at writeU_Int32LE (internal/buffer.js:691:3) at Buffer.writeUInt32LE (internal/buffer.js:704:10) at Primitive.pack (/home/douglas/projetos/camera/v380/v380-nodejs/node_modules/typebase/typebase.js:162:21) at Struct.pack (/home/douglas/projetos/camera/v380/v380-nodejs/node_modules/typebase/typebase.js:260:24) at Socket.<anonymous> (/home/douglas/projetos/camera/v380/v380-nodejs/src/app.ts:273:22) at Socket.emit (events.js:400:28) at Socket.emit (domain.js:475:12) at emitReadable_ (internal/streams/readable.js:555:12) { code: 'ERR_OUT_OF_RANGE' } error Command failed with exit code 1.
from v380.
I'm getting the same error. These are the versions:
Software Version: AppV380E31_V1.1.3.4_20211105
Firmware Version: HwV380E31_WF8_PTZ_WIFI_20201218
from v380.
I'm getting the same error. Any suggestion?
from v380.
@thalesmaoa I'm not sure if this is exactly the case, but I found out that my camera was sending non-compliant packets at the start of the RTSP stream. Maybe you can check if your camera works with retina. I had created an issue before reg. this but didn't get time to contribute a fix, (issue)
from v380.
Related Issues (18)
- Contact HOT 1
- Send audio HOT 2
- Can't save to file at normal speed HOT 5
- Night mode HOT 1
- segmentation fault / no protocol specified
- seem camera through app android HOT 1
- Can't connect with using LAN without GATEWAY specified HOT 3
- unknown type 40 /unknown type 41 HOT 1
- Discovery failed to send data 1
- Connection is being made but no video
- Receive failed with error 54
- ffplay syntax doesn't work HOT 1
- Connection closed issue HOT 38
- no way to get audio? HOT 1
- Audio and RTSP streaming HOT 6
- [Question] Connecting to the camera using the CPP app or a network stream viewer? HOT 2
- Can't compile on linux HOT 2
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from v380.