Navigation does not start correct on any point of a track about osmand

[C6competition]

Is anybody taking care about this issue?

[DmitryAlexei]

OsmAnd~ 4.6.0#871m, released: 2023-10-13
Cannot reproduce this issue using provided track and following settings:

• in route parameters (navigation > Navigation settings > Route parameters) options Minimal distance to recalculate route and In case of reverse direction are disabled (see screenshot)
• in follow track menu Nearest point is chosen
• provided track is attached to the roads in navigation mode
• location is simulated using provided gpx and created routes (tried different variants)

Actual result:

• when route recalculation options are disabled, route is not recalculated, distance and ETA don't change
• in case of deviation from the track when recalculation options are enabled, the route is sometimes calculated to the nearest point in the begging of the track (see video), that change the length and ETA.

Settings	Actual result	When recalculation enabled
		video_2023-10-16_13-16-48.mp4

[C6competition]

After investigating the issue again, I found the difference between the 2 situations.

In one case ( farer away from the Start/End of the track) the system insertes in the start navigation window the STARTPOINT OF THE TRACK as the startpoint for navigation!

In the other case (closer to the Start/End of the track) the sytem inserts in the start navigation window the ACTUAL POSITION as the startpoint for navigation!

As mostly you start navigation at the beginning of a track (the actual position is inserted) this stays in my mind and I didn't pay attention to the start point any more. My fault!! Sorry for the work I caused you.

But for the future, I suggest, as default always use the ACTUAL POSITION at the start position, because mostely You start navigation from the point, where you are at the moment.

[vshcherb]

Issue unfortunately not reproduce and will be closed