gnmi_cli is not displaying subscribeResponse about gnmi

[jipanyang]

I encountered similar problem and put a few lines of code in ToScalar() https://github.com/openconfig/gnmi/blob/master/value/value.go#L92 to get around the problem. It might work for you too.

case *pb.TypedValue_JsonVal:
	var val interface{}
	val = tv.GetJsonVal()
	json.Unmarshal(val.([]byte), &i)

[kboyapa1]

Thank you @jipanyang for your suggestion.

I have added your change but did not help me to get the problem why client is waiting for the response even server has responded.

I have verified my server response using https://github.com/nokia/pygnmi/blob/master/gNMI_Subscribe.py client, where I could see the response on the client. I am facing the issue with gnmi_cli.

Can please point me what I could have done wrong in filling the server's SubscribeResponse?

[gcsl]

Does your server send a sync response at the end of sending all values? If not, the gnmi_cli will wait forever for the delivery of that message before rendering output. If you want to see the messages as they are delivered, you can switch the output to not aggregate all data into a single tree and render the messages as they come in. The option for -display_type (-dt) can be set to single (s) to see the individual leaves as they are returned, or proto (p) to see the raw protos as they are delivered.

…

-dt=s

-dt=p

On Mon, Jan 22, 2018 at 8:21 PM, kboyapa1 ***@***.***> wrote: Thank you @jipanyang <https://github.com/jipanyang> for your suggestion. I have added your change but did not help me to get the problem why client is waiting for the response even server has responded. I have verified my server response using https://github.com/nokia/ pygnmi/blob/master/gNMI_Subscribe.py client, where I could see the response on the client. I am facing the issue with gnmi_cli. Can please point me what I could have done wrong in filling the server's SubscribeResponse? — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#19 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ARfIL3xSbzQUyWezNLM99T0NJzxdSasvks5tNV5GgaJpZM4RmNtv> .

[kboyapa1]

Thanks a lot @jipanyang
Able to see the response in gnmi_cli go cleint with your suggested options (--dt=p or --dt=s).