Comments (5)
lili-lilili
commented on August 16, 2024
Here is the log with trace:
210.15929|ATTN_FAST|I>...intr task woke up
210.15932|INTR|IntrRp::msgHandler() lsiIntStatus 0x0000000000000000
210.15933|INTR|IntrRp::msgHandler(): LSI Interrupt Detected
210.15934|INTR|IntrRp::msgHandler() lsiIntStatus 0x0000000000000000
210.15934|INTR|IntrRp::msgHandler() lsiIntStatus 0x0000000000000000
210.15935|INTR|IntrRp::msgHandler() lsiIntStatus 0x0000000000000000
210.15936|INTR|IntrRp::msgHandler() lsiIntStatus 0x0000000000000000
210.15938|INTR|IntrRp::completeInterruptProcessing() Removing pending interrupt for pir: 0x0,interrupt type: 4
210.15992|PRDF|I>PRD Signature 00050000 34EB0000
210.15993|PRDF|I>PRD Signature 00050000 34EB000D
210.15995|PRDF|I>PRD Signature 00050000 34EB000D
210.16033|INTR|IntrRp::completeInterruptProcessing() Removing pending interrupt for pir: 0x400,interrupt type: 4
210.16037|PRDF|I>PRD Signature 00440001 00000000
210.16067|PRDF|I>PRD Signature 00440001 65CC0000
210.16069|PRDF|I>PRD Signature 00440001 65CC0007
210.16070|PRDF|I>PRD Signature 00440001 65CC0007
210.16074|PRDF|I>PRD Signature 00490003 00000000
210.16096|PRDF|I>PRD Signature 00490003 E6E60000
210.16113|PRDF|I>PRD Signature 00490003 E6E60000
210.16114|PRDF|I>PRD Signature 00490003 E6E60000
210.16124|PRDF|I>PRD Signature 00490003 F0C60000
210.16127|PRDF|I>PRD Signature 00490003 F0C60006
210.16129|PRDF|I>PRD Signature 00490003 F0C60006
210.16135|PRDF|I>PRD Signature 004B0007 00000000
210.16153|PRDF|I>PRD Signature 004B0007 1CD40000
210.16155|PRDF|I>PRD Signature 004B0007 1CD40005
210.16156|PRDF|I>PRD Signature 004B0007 1CD40005
210.16252|PRDF|I>PRD Signature 004B0007 59930000
210.16255|PRDF|I>PRD Signature 004B0007 5993000A
210.16256|PRDF|I>PRD Signature 004B0007 5993000A
210.16257|MDIA_FAST|I>sm: processMaintCommandEvent
210.16258|MDIA_FAST|I>sm: processing event for: 0x004b0007, target: 0x004b0007, type: 2
210.16259|PLDM|I> >>resetWatchdogTimer
210.18625|PLDM|I> <<resetWatchdogTimer
210.18640|INITSVC|sendProgressCodeToBmc(): sending CC009381 progress code
210.19038|PRDF|[MemTdCtlr::defaultStep] The TD command made it to the end of memory on chip: 0x004b0007
210.19047|MDIA_FAST|I>sm: processMaintCommandEvent
210.19048|MDIA_FAST|I>sm: processing event for: 0x004b0007, target: 0x004b0007, type: 0
210.19049|PLDM|I> >>resetWatchdogTimer
210.19860|PLDM|I> <<resetWatchdogTimer
210.19873|INITSVC|sendProgressCodeToBmc(): sending CC009381 progress code
210.20384|MDIA_FAST|I>sm: dispatching work item 13 for: 0x004b0007, priority: 2,
210.20437|MDIA_FAST|I>sm: executing work item 13 for: 0x004b0007
210.20445|MDIA_FAST|I>sm: dispatching work item 15 for: 0x004b0007, priority: 1,
210.20446|MDIA_FAST|I>sm: executing work item 15 for: 0x004b0007
210.20446|ERRL|E>Error deleted without commit : PLID=90000D89, EID=90000D89
210.20447|MDIA_FAST|I>Running mss::unmask::after_memdiags HWP call on OCMB target HUID 0x004B0007.
210.20450|PRDF|<<PRDF::main()
210.20455|ATTN_SLOW|I>callPrd with Attn Count of 1
210.20456|PRDF|>>PRDF::main() Global attnType=0005
210.20457|INTR|IntrRp::msgHandler(): LSI Interrupt Detected
210.20458|INTR|IntrRp::msgHandler() lsiIntStatus 0x0000000000000000
210.20458|INTR|IntrRp::msgHandler() lsiIntStatus 0x0000000000000000
210.20459|INTR|IntrRp::msgHandler() lsiIntStatus 0x0800000000000000
210.20460|INTR|IntrRp::msgHandler() External Interrupt found for pir: 0x400,interrupt type: 4
210.20461|MDIA_FAST|I>SUCCESS: mss::unmask::after_memdiags HWP call on OCMB target HUID 0x004b0007.
210.20463|MDIA_FAST|I>Running mss::reset_reorder_queue_settings HWP call on OCMB target HUID 0x004B0007.
210.20471|ERRL|E>Error created : PLID=90000D8A, EID=90000D8A, RC=E580, Mod=0B, Userdata=0000000000000000 0000000000000000, Sev=RECOVERED
210.20471|MDIA_FAST|I>SUCCESS: mss::reset_reorder_queue_settings HWP call on OCMB target HUID 0x004b0007.
210.20473|PRDF|I>PRD Signature 00000000 00000000
210.20473|PRDF|I>PRD Signature 00050002 00000000
210.20484|ATTN_FAST|I>...intr task woke up
210.20561|INTR|IntrRp::msgHandler() lsiIntStatus 0x0000000000000000
210.20572|INTR|IntrRp::completeInterruptProcessing() Removing pending interrupt for pir: 0x400,interrupt type: 4
210.20614|PRDF|I>PRD Signature 00050002 34EB0000
210.20615|PRDF|I>PRD Signature 00050002 34EB000D
210.20616|PRDF|I>PRD Signature 00050002 34EB000D
210.20636|PRDF|I>PRD Signature 00440009 00000000
210.20663|PRDF|I>PRD Signature 00440009 65CC0000
210.20665|PRDF|I>PRD Signature 00440009 65CC0007
210.20666|PRDF|I>PRD Signature 00440009 65CC0007
210.20670|PRDF|I>PRD Signature 00490013 00000000
210.20689|PRDF|I>PRD Signature 00490013 E6E60000
210.20704|PRDF|I>PRD Signature 00490013 E6E60000
210.20705|PRDF|I>PRD Signature 00490013 E6E60000
210.20714|PRDF|I>PRD Signature 00490013 F0C60000
210.20717|PRDF|I>PRD Signature 00490013 F0C60006
210.20718|PRDF|I>PRD Signature 00490013 F0C60006
210.20724|PRDF|I>PRD Signature 004B0027 00000000
210.20740|PRDF|I>PRD Signature 004B0027 1CD40000
210.20741|PRDF|I>PRD Signature 004B0027 1CD40005
210.20742|PRDF|I>PRD Signature 004B0027 1CD40005
210.20830|PRDF|I>PRD Signature 004B0027 59930000
210.20833|PRDF|I>PRD Signature 004B0027 5993000A
210.20834|PRDF|I>PRD Signature 004B0027 5993000A
210.20835|MDIA_FAST|I>sm: processMaintCommandEvent
210.20836|MDIA_FAST|I>sm: processing event for: 0x004b0027, target: 0x004b0027, type: 2
210.20837|PLDM|I> >>resetWatchdogTimer
210.25212|PLDM|I> <<resetWatchdogTimer
210.25227|INITSVC|sendProgressCodeToBmc(): sending CC009381 progress code
210.25641|PRDF|[MemTdCtlr::defaultStep] The TD command made it to the end of memory on chip: 0x004b0027
210.25650|MDIA_FAST|I>sm: processMaintCommandEvent
210.25651|MDIA_FAST|I>sm: processing event for: 0x004b0027, target: 0x004b0027, type: 0
210.25651|PLDM|I> >>resetWatchdogTimer
210.26359|PLDM|I> <<resetWatchdogTimer
210.26372|INITSVC|sendProgressCodeToBmc(): sending CC009381 progress code
210.26878|MDIA_FAST|I>sm: dispatching work item 13 for: 0x004b0027, priority: 2,
210.26934|ERRL|E>Error deleted without commit : PLID=90000D8A, EID=90000D8A
210.26938|PRDF|<<PRDF::main()
210.26940|MDIA_FAST|I>sm: executing work item 13 for: 0x004b0027
210.26941|ATTN_SLOW|I>callPrd with Attn Count of 0
210.26943|ATTN_FAST|I>...prd task woke up, shutdown: 0, pending: 1
210.26946|ATTN_SLOW|I>callPrd with Attn Count of 0
210.26947|MDIA_FAST|I>sm: dispatching work item 15 for: 0x004b0027, priority: 1,
210.26948|MDIA_FAST|I>sm: executing work item 15 for: 0x004b0027
210.26949|MDIA_FAST|I>Running mss::unmask::after_memdiags HWP call on OCMB target HUID 0x004B0027.
210.26962|MDIA_FAST|I>SUCCESS: mss::unmask::after_memdiags HWP call on OCMB target HUID 0x004b0027.
210.26963|MDIA_FAST|I>Running mss::reset_reorder_queue_settings HWP call on OCMB target HUID 0x004B0027.
210.26971|MDIA_FAST|I>SUCCESS: mss::reset_reorder_queue_settings HWP call on OCMB target HUID 0x004b0027.
210.26971|MDIA_FAST|I>sm: all workflows finished
210.26973|MDIA_FAST|I>sm: shutting down...
210.26973|MDIA_FAST|I>Stopping threadPool...
210.26982|MDIA_FAST|I>Stopping monitor...
210.27644|MDIA_FAST|I>cm: CommandMonitor will be shutdown
210.27745|MDIA_FAST|I>sm: ...shutdown complete
210.27746|ATTN_SLOW|I>shutting down...
210.27822|INTR|INTR remove registration of interrupt type = 0x4
210.27823|INTR|I>Removing interrupt listener: 4
210.27824|ATTN_FAST|I>...intr task woke up
210.27880|ATTN_FAST|I>interrupt task shutting down
210.27883|ATTN_FAST|I>...prd task woke up, shutdown: 1, pending: 0
210.27884|ATTN_FAST|I>prd task shutting down
210.27980|ATTN_SLOW|I>..shutdown complete
210.27981|ISTEPS_TRACE|<<call_mss_memdiag, returning success
210.28207|ATTN_SLOW|I>checkForIplAttentions: 4 chips
210.28210|ATTN_SLOW|I>handleAttns 0 active( PRD)
210.28213|ATTN_SLOW|I>handleAttns 0 active( PRD)
210.28215|ATTN_SLOW|I>handleAttns 0 active( PRD)
210.28218|ATTN_SLOW|I>handleAttns 0 active( PRD)
210.28239|ERRL|I>Got an error log Msg - Type: 0x00000039
210.28240|ERRL|I>Flush message received
210.28241|INITSVC|<<doIstep: step 14, substep 1
210.28242|INITSVC|>>doIstep: step 14, substep 2, task mss_thermal_init
210.28244|1970/01/01 00:10:24|ISTEP 14. 2 - mss_thermal_init
210.28607|PLDM|I> >>resetWatchdogTimer
210.29220|PLDM|I> <<resetWatchdogTimer
210.29234|INITSVC|sendProgressCodeToBmc(): sending CC009382 progress code
210.31629|ISTEPS_TRACE|>>call_mss_thermal_init
210.31705|ISTEPS_TRACE|I>Running exp_mss_thermal_init HWP call on Explorer chip, target HUID 0x004B0000, chipId 0x000060D2
210.34753|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p00 Start thermal_init
210.41759|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p00 End thermal_init
210.42411|ISTEPS_TRACE|I>SUCCESS: exp_mss_thermal_init HWP on Explorer chip, target HUID 0x004B0000, chipId 0x000060D2
210.42412|ISTEPS_TRACE|I>Running exp_mss_thermal_init HWP call on Explorer chip, target HUID 0x004B0001, chipId 0x000060D2
210.42413|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p01 Start thermal_init
210.46441|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p01 End thermal_init
210.46443|ISTEPS_TRACE|I>SUCCESS: exp_mss_thermal_init HWP on Explorer chip, target HUID 0x004B0001, chipId 0x000060D2
210.46444|ISTEPS_TRACE|I>Running exp_mss_thermal_init HWP call on Explorer chip, target HUID 0x004B0002, chipId 0x000060D2
210.46445|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p02 Start thermal_init
210.50473|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p02 End thermal_init
210.50475|ISTEPS_TRACE|I>SUCCESS: exp_mss_thermal_init HWP on Explorer chip, target HUID 0x004B0002, chipId 0x000060D2
210.50476|ISTEPS_TRACE|I>Running exp_mss_thermal_init HWP call on Explorer chip, target HUID 0x004B0003, chipId 0x000060D2
210.50477|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p03 Start thermal_init
210.54505|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p03 End thermal_init
210.54507|ISTEPS_TRACE|I>SUCCESS: exp_mss_thermal_init HWP on Explorer chip, target HUID 0x004B0003, chipId 0x000060D2
210.54508|ISTEPS_TRACE|I>Running exp_mss_thermal_init HWP call on Explorer chip, target HUID 0x004B0004, chipId 0x000060D2
210.54509|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p04 Start thermal_init
210.58536|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p04 End thermal_init
210.58538|ISTEPS_TRACE|I>SUCCESS: exp_mss_thermal_init HWP on Explorer chip, target HUID 0x004B0004, chipId 0x000060D2
210.58539|ISTEPS_TRACE|I>Running exp_mss_thermal_init HWP call on Explorer chip, target HUID 0x004B0005, chipId 0x000060D2
210.58540|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p05 Start thermal_init
210.62568|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p05 End thermal_init
210.62570|ISTEPS_TRACE|I>SUCCESS: exp_mss_thermal_init HWP on Explorer chip, target HUID 0x004B0005, chipId 0x000060D2
210.62571|ISTEPS_TRACE|I>Running exp_mss_thermal_init HWP call on Explorer chip, target HUID 0x004B0006, chipId 0x000060D2
210.62572|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p06 Start thermal_init
210.66601|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p06 End thermal_init
210.66602|ISTEPS_TRACE|I>SUCCESS: exp_mss_thermal_init HWP on Explorer chip, target HUID 0x004B0006, chipId 0x000060D2
210.66604|ISTEPS_TRACE|I>Running exp_mss_thermal_init HWP call on Explorer chip, target HUID 0x004B0007, chipId 0x000060D2
210.66604|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p07 Start thermal_init
210.70633|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p07 End thermal_init
210.70634|ISTEPS_TRACE|I>SUCCESS: exp_mss_thermal_init HWP on Explorer chip, target HUID 0x004B0007, chipId 0x000060D2
210.70636|ISTEPS_TRACE|I>Running exp_mss_thermal_init HWP call on Explorer chip, target HUID 0x004B0020, chipId 0x000060D2
210.70637|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p32 Start thermal_init
210.74665|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p32 End thermal_init
210.74666|ISTEPS_TRACE|I>SUCCESS: exp_mss_thermal_init HWP on Explorer chip, target HUID 0x004B0020, chipId 0x000060D2
210.74668|ISTEPS_TRACE|I>Running exp_mss_thermal_init HWP call on Explorer chip, target HUID 0x004B0021, chipId 0x000060D2
210.74669|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p33 Start thermal_init
210.78696|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p33 End thermal_init
210.78697|ISTEPS_TRACE|I>SUCCESS: exp_mss_thermal_init HWP on Explorer chip, target HUID 0x004B0021, chipId 0x000060D2
210.78699|ISTEPS_TRACE|I>Running exp_mss_thermal_init HWP call on Explorer chip, target HUID 0x004B0022, chipId 0x000060D2
210.78700|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p34 Start thermal_init
210.82728|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p34 End thermal_init
210.82730|ISTEPS_TRACE|I>SUCCESS: exp_mss_thermal_init HWP on Explorer chip, target HUID 0x004B0022, chipId 0x000060D2
210.82731|ISTEPS_TRACE|I>Running exp_mss_thermal_init HWP call on Explorer chip, target HUID 0x004B0023, chipId 0x000060D2
210.82732|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p35 Start thermal_init
210.86762|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p35 End thermal_init
210.86764|ISTEPS_TRACE|I>SUCCESS: exp_mss_thermal_init HWP on Explorer chip, target HUID 0x004B0023, chipId 0x000060D2
210.86766|ISTEPS_TRACE|I>Running exp_mss_thermal_init HWP call on Explorer chip, target HUID 0x004B0024, chipId 0x000060D2
210.86766|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p36 Start thermal_init
210.90796|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p36 End thermal_init
210.90797|ISTEPS_TRACE|I>SUCCESS: exp_mss_thermal_init HWP on Explorer chip, target HUID 0x004B0024, chipId 0x000060D2
210.90799|ISTEPS_TRACE|I>Running exp_mss_thermal_init HWP call on Explorer chip, target HUID 0x004B0025, chipId 0x000060D2
210.90799|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p37 Start thermal_init
210.94828|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p37 End thermal_init
210.94830|ISTEPS_TRACE|I>SUCCESS: exp_mss_thermal_init HWP on Explorer chip, target HUID 0x004B0025, chipId 0x000060D2
210.94831|ISTEPS_TRACE|I>Running exp_mss_thermal_init HWP call on Explorer chip, target HUID 0x004B0026, chipId 0x000060D2
210.94832|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p38 Start thermal_init
210.98860|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p38 End thermal_init
210.98861|ISTEPS_TRACE|I>SUCCESS: exp_mss_thermal_init HWP on Explorer chip, target HUID 0x004B0026, chipId 0x000060D2
210.98862|ISTEPS_TRACE|I>Running exp_mss_thermal_init HWP call on Explorer chip, target HUID 0x004B0027, chipId 0x000060D2
210.98863|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p39 Start thermal_init
211.02889|FAPI|exp_mss_thermal_init.C: ocmb:k0:n0:s0:p39 End thermal_init
211.02891|ISTEPS_TRACE|I>SUCCESS: exp_mss_thermal_init HWP on Explorer chip, target HUID 0x004B0027, chipId 0x000060D2
211.02970|ISTEPS_TRACE|I>Running p10_throttle_sync HWP on PROC target HUID 0x00050000
211.09225|ISTEPS_TRACE|I>SUCCESS : p10_throttle_sync HWP call on PROC target HUID 0x00050000
211.09226|ISTEPS_TRACE|I>Running p10_throttle_sync HWP on PROC target HUID 0x00050001
211.10520|FAPI|p10_throttle_sync.C: No MIs found under pu:k0:n0:s0:p01 -- skipping
211.10522|ISTEPS_TRACE|I>SUCCESS : p10_throttle_sync HWP call on PROC target HUID 0x00050001
211.10522|ISTEPS_TRACE|I>Running p10_throttle_sync HWP on PROC target HUID 0x00050002
211.10671|ISTEPS_TRACE|I>SUCCESS : p10_throttle_sync HWP call on PROC target HUID 0x00050002
211.10672|ISTEPS_TRACE|I>Running p10_throttle_sync HWP on PROC target HUID 0x00050003
211.10692|FAPI|p10_throttle_sync.C: No MIs found under pu:k0:n0:s0:p03 -- skipping
211.10693|ISTEPS_TRACE|I>SUCCESS : p10_throttle_sync HWP call on PROC target HUID 0x00050003
211.10693|ISTEPS_TRACE|<<call_mss_thermal_init, returning success
211.11148|ATTN_SLOW|I>checkForIplAttentions: 4 chips
211.11152|ATTN_SLOW|I>handleAttns 0 active( PRD)
211.11154|ATTN_SLOW|I>handleAttns 0 active( PRD)
211.11156|ATTN_SLOW|I>handleAttns 0 active( PRD)
211.11158|ATTN_SLOW|I>handleAttns 0 active( PRD)
211.11178|ERRL|I>Got an error log Msg - Type: 0x00000039
211.11179|ERRL|I>Flush message received
211.11181|INITSVC|<<doIstep: step 14, substep 2
211.11181|INITSVC|>>doIstep: step 14, substep 3, task proc_load_iop_xram
211.11183|1970/01/01 00:10:24|ISTEP 14. 3 - proc_load_iop_xram
211.11566|PLDM|I> >>resetWatchdogTimer
211.12218|PLDM|I> <<resetWatchdogTimer
211.12232|INITSVC|sendProgressCodeToBmc(): sending CC009383 progress code
211.12978|ISTEPS_TRACE|call_proc_load_iop_xram entry
211.12980|PNOR|loadSecureSection i_section = 4 (HCODE)
211.12984|PNOR|PNOR::verifySections> called on secure section HCODE
211.12985|PNOR|PNOR::verifySections> hasHashTable FOUND l_info.name=HCODE
211.12989|PNOR|SPnorRP::verifySections section start address in temp space l_tempAddr=0x0000000144000000, section start address in unsecured space l_unsecureAddr=0x0000000084000000, l_info.size = 0x0000000000084000, l_info.secureProtectedPayloadSize = 0x0000000000002000,
211.14146|PNOR|SPnorRP::verifySections> Prefix hdr flags:0x40000000, secure_version:0x0
211.14147|PNOR|SPnorRP::verifySections Total container size = 0x0000000000084000
211.14148|PNOR|SPnorRP::verifySections Total Protected size with Header = 0x0000000000003000
211.14152|ISTEPS_TRACE|HCODE addr = 0x0x204003000
211.14231|ISTEPS_TRACE|call_proc_load_iop_xram target HUID 00050000
211.16936|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Calling p9_xip_get_section (HW image)
211.18381|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: i_hw_image 0x204003000, l_xramImgPtr 0x204072ee0, l_xramFwDataPtr 0x2040731d0, l_xramFwSize 32768
211.18383|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Write XRAM FW data: Ptr 0x2040731d0, size 32768.
211.19911|FAPI|p10_iop_xram_utils.C: Target: pu:k0:n0:s0:p00
211.21975|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Attemp to write PCIE img to XRAM: iop_top 0, phy 0.
211.21976|FAPI|p10_load_iop_xram.C: subroutine_executor: executing hwp p10_putsram via SBE chip-op
211.21977|FAPI|p10_load_iop_xram.C: subroutine_executor: isBootProc = 1 .. executing hwp p10_putsram on host
211.24131|FAPI|p10_write_xram.C: p10_write_xram: i_offset 0x0, i_bytes 32768, i_top 0, i_phy 0.
211.31744|FAPI|p10_load_iop_xram.C: subroutine_executor: SBE HWP invoking successful.
211.31746|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Successfully wrote PCIE img to XRAM: iop_top 0, phy 0.
211.31747|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Attemp to write PCIE img to XRAM: iop_top 0, phy 1.
211.31748|FAPI|p10_load_iop_xram.C: subroutine_executor: executing hwp p10_putsram via SBE chip-op
211.31749|FAPI|p10_load_iop_xram.C: subroutine_executor: isBootProc = 1 .. executing hwp p10_putsram on host
211.31755|FAPI|p10_write_xram.C: p10_write_xram: i_offset 0x0, i_bytes 32768, i_top 0, i_phy 1.
211.33038|FAPI|p10_load_iop_xram.C: subroutine_executor: SBE HWP invoking successful.
211.33040|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Successfully wrote PCIE img to XRAM: iop_top 0, phy 1.
211.33050|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Attemp to write PCIE img to XRAM: iop_top 1, phy 0.
211.33051|FAPI|p10_load_iop_xram.C: subroutine_executor: executing hwp p10_putsram via SBE chip-op
211.33052|FAPI|p10_load_iop_xram.C: subroutine_executor: isBootProc = 1 .. executing hwp p10_putsram on host
211.33058|FAPI|p10_write_xram.C: p10_write_xram: i_offset 0x0, i_bytes 32768, i_top 1, i_phy 0.
211.34341|FAPI|p10_load_iop_xram.C: subroutine_executor: SBE HWP invoking successful.
211.34342|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Successfully wrote PCIE img to XRAM: iop_top 1, phy 0.
211.34343|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Attemp to write PCIE img to XRAM: iop_top 1, phy 1.
211.34344|FAPI|p10_load_iop_xram.C: subroutine_executor: executing hwp p10_putsram via SBE chip-op
211.34346|FAPI|p10_load_iop_xram.C: subroutine_executor: isBootProc = 1 .. executing hwp p10_putsram on host
211.34410|FAPI|p10_write_xram.C: p10_write_xram: i_offset 0x0, i_bytes 32768, i_top 1, i_phy 1.
211.35652|FAPI|p10_load_iop_xram.C: subroutine_executor: SBE HWP invoking successful.
211.35653|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Successfully wrote PCIE img to XRAM: iop_top 1, phy 1.
211.39002|ISTEPS_TRACE|SUCCESS : proc_load_iop_xram
211.39003|ISTEPS_TRACE|call_proc_load_iop_xram target HUID 00050001
211.39010|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Calling p9_xip_get_section (HW image)
211.39012|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: i_hw_image 0x204003000, l_xramImgPtr 0x204072ee0, l_xramFwDataPtr 0x2040731d0, l_xramFwSize 32768
211.39035|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Write XRAM FW data: Ptr 0x2040731d0, size 32768.
211.39036|FAPI|p10_iop_xram_utils.C: Target: pu:k0:n0:s0:p01
211.39125|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Attemp to write PCIE img to XRAM: iop_top 0, phy 0.
211.39126|FAPI|p10_load_iop_xram.C: subroutine_executor: executing hwp p10_putsram via SBE chip-op
211.39127|FAPI|p10_load_iop_xram.C: subroutine_executor: isBootProc = 0 .. executing hwp p10_putsram on host
211.39133|FAPI|p10_write_xram.C: p10_write_xram: i_offset 0x0, i_bytes 32768, i_top 0, i_phy 0.
211.40419|FAPI|p10_load_iop_xram.C: subroutine_executor: SBE HWP invoking successful.
211.40421|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Successfully wrote PCIE img to XRAM: iop_top 0, phy 0.
211.40422|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Attemp to write PCIE img to XRAM: iop_top 0, phy 1.
211.40423|FAPI|p10_load_iop_xram.C: subroutine_executor: executing hwp p10_putsram via SBE chip-op
211.40424|FAPI|p10_load_iop_xram.C: subroutine_executor: isBootProc = 0 .. executing hwp p10_putsram on host
211.40431|FAPI|p10_write_xram.C: p10_write_xram: i_offset 0x0, i_bytes 32768, i_top 0, i_phy 1.
211.41728|FAPI|p10_load_iop_xram.C: subroutine_executor: SBE HWP invoking successful.
211.41729|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Successfully wrote PCIE img to XRAM: iop_top 0, phy 1.
211.41738|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Attemp to write PCIE img to XRAM: iop_top 1, phy 0.
211.41739|FAPI|p10_load_iop_xram.C: subroutine_executor: executing hwp p10_putsram via SBE chip-op
211.41740|FAPI|p10_load_iop_xram.C: subroutine_executor: isBootProc = 0 .. executing hwp p10_putsram on host
211.41746|FAPI|p10_write_xram.C: p10_write_xram: i_offset 0x0, i_bytes 32768, i_top 1, i_phy 0.
211.43021|FAPI|p10_load_iop_xram.C: subroutine_executor: SBE HWP invoking successful.
211.43022|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Successfully wrote PCIE img to XRAM: iop_top 1, phy 0.
211.43023|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Attemp to write PCIE img to XRAM: iop_top 1, phy 1.
211.43024|FAPI|p10_load_iop_xram.C: subroutine_executor: executing hwp p10_putsram via SBE chip-op
211.43026|FAPI|p10_load_iop_xram.C: subroutine_executor: isBootProc = 0 .. executing hwp p10_putsram on host
211.43032|FAPI|p10_write_xram.C: p10_write_xram: i_offset 0x0, i_bytes 32768, i_top 1, i_phy 1.
211.44287|FAPI|p10_load_iop_xram.C: subroutine_executor: SBE HWP invoking successful.
211.44289|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Successfully wrote PCIE img to XRAM: iop_top 1, phy 1.
211.46598|ISTEPS_TRACE|SUCCESS : proc_load_iop_xram
211.46598|ISTEPS_TRACE|call_proc_load_iop_xram target HUID 00050002
211.46606|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Calling p9_xip_get_section (HW image)
211.46614|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: i_hw_image 0x204003000, l_xramImgPtr 0x204072ee0, l_xramFwDataPtr 0x2040731d0, l_xramFwSize 32768
211.46616|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Write XRAM FW data: Ptr 0x2040731d0, size 32768.
211.46616|FAPI|p10_iop_xram_utils.C: Target: pu:k0:n0:s0:p02
211.46708|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Attemp to write PCIE img to XRAM: iop_top 0, phy 0.
211.46709|FAPI|p10_load_iop_xram.C: subroutine_executor: executing hwp p10_putsram via SBE chip-op
211.46710|FAPI|p10_load_iop_xram.C: subroutine_executor: isBootProc = 0 .. executing hwp p10_putsram on host
211.46717|FAPI|p10_write_xram.C: p10_write_xram: i_offset 0x0, i_bytes 32768, i_top 0, i_phy 0.
211.47998|FAPI|p10_load_iop_xram.C: subroutine_executor: SBE HWP invoking successful.
211.48000|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Successfully wrote PCIE img to XRAM: iop_top 0, phy 0.
211.48001|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Attemp to write PCIE img to XRAM: iop_top 0, phy 1.
211.48002|FAPI|p10_load_iop_xram.C: subroutine_executor: executing hwp p10_putsram via SBE chip-op
211.48003|FAPI|p10_load_iop_xram.C: subroutine_executor: isBootProc = 0 .. executing hwp p10_putsram on host
211.48009|FAPI|p10_write_xram.C: p10_write_xram: i_offset 0x0, i_bytes 32768, i_top 0, i_phy 1.
211.49260|FAPI|p10_load_iop_xram.C: subroutine_executor: SBE HWP invoking successful.
211.49261|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Successfully wrote PCIE img to XRAM: iop_top 0, phy 1.
211.49270|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Attemp to write PCIE img to XRAM: iop_top 1, phy 0.
211.49271|FAPI|p10_load_iop_xram.C: subroutine_executor: executing hwp p10_putsram via SBE chip-op
211.49272|FAPI|p10_load_iop_xram.C: subroutine_executor: isBootProc = 0 .. executing hwp p10_putsram on host
211.49278|FAPI|p10_write_xram.C: p10_write_xram: i_offset 0x0, i_bytes 32768, i_top 1, i_phy 0.
211.50539|FAPI|p10_load_iop_xram.C: subroutine_executor: SBE HWP invoking successful.
211.50540|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Successfully wrote PCIE img to XRAM: iop_top 1, phy 0.
211.50541|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Attemp to write PCIE img to XRAM: iop_top 1, phy 1.
211.50542|FAPI|p10_load_iop_xram.C: subroutine_executor: executing hwp p10_putsram via SBE chip-op
211.50543|FAPI|p10_load_iop_xram.C: subroutine_executor: isBootProc = 0 .. executing hwp p10_putsram on host
211.50549|FAPI|p10_write_xram.C: p10_write_xram: i_offset 0x0, i_bytes 32768, i_top 1, i_phy 1.
211.51800|FAPI|p10_load_iop_xram.C: subroutine_executor: SBE HWP invoking successful.
211.51801|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Successfully wrote PCIE img to XRAM: iop_top 1, phy 1.
211.52816|ISTEPS_TRACE|SUCCESS : proc_load_iop_xram
211.52817|ISTEPS_TRACE|call_proc_load_iop_xram target HUID 00050003
211.52824|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Calling p9_xip_get_section (HW image)
211.52827|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: i_hw_image 0x204003000, l_xramImgPtr 0x204072ee0, l_xramFwDataPtr 0x2040731d0, l_xramFwSize 32768
211.52832|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Write XRAM FW data: Ptr 0x2040731d0, size 32768.
211.52833|FAPI|p10_iop_xram_utils.C: Target: pu:k0:n0:s0:p03
211.52923|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Attemp to write PCIE img to XRAM: iop_top 0, phy 0.
211.52924|FAPI|p10_load_iop_xram.C: subroutine_executor: executing hwp p10_putsram via SBE chip-op
211.52925|FAPI|p10_load_iop_xram.C: subroutine_executor: isBootProc = 0 .. executing hwp p10_putsram on host
211.52931|FAPI|p10_write_xram.C: p10_write_xram: i_offset 0x0, i_bytes 32768, i_top 0, i_phy 0.
211.54184|FAPI|p10_load_iop_xram.C: subroutine_executor: SBE HWP invoking successful.
211.54185|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Successfully wrote PCIE img to XRAM: iop_top 0, phy 0.
211.54186|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Attemp to write PCIE img to XRAM: iop_top 0, phy 1.
211.54187|FAPI|p10_load_iop_xram.C: subroutine_executor: executing hwp p10_putsram via SBE chip-op
211.54189|FAPI|p10_load_iop_xram.C: subroutine_executor: isBootProc = 0 .. executing hwp p10_putsram on host
211.54195|FAPI|p10_write_xram.C: p10_write_xram: i_offset 0x0, i_bytes 32768, i_top 0, i_phy 1.
211.55453|FAPI|p10_load_iop_xram.C: subroutine_executor: SBE HWP invoking successful.
211.55454|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Successfully wrote PCIE img to XRAM: iop_top 0, phy 1.
211.55463|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Attemp to write PCIE img to XRAM: iop_top 1, phy 0.
211.55464|FAPI|p10_load_iop_xram.C: subroutine_executor: executing hwp p10_putsram via SBE chip-op
211.55465|FAPI|p10_load_iop_xram.C: subroutine_executor: isBootProc = 0 .. executing hwp p10_putsram on host
211.55471|FAPI|p10_write_xram.C: p10_write_xram: i_offset 0x0, i_bytes 32768, i_top 1, i_phy 0.
211.56718|FAPI|p10_load_iop_xram.C: subroutine_executor: SBE HWP invoking successful.
211.56719|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Successfully wrote PCIE img to XRAM: iop_top 1, phy 0.
211.56720|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Attemp to write PCIE img to XRAM: iop_top 1, phy 1.
211.56721|FAPI|p10_load_iop_xram.C: subroutine_executor: executing hwp p10_putsram via SBE chip-op
211.56723|FAPI|p10_load_iop_xram.C: subroutine_executor: isBootProc = 0 .. executing hwp p10_putsram on host
211.56729|FAPI|p10_write_xram.C: p10_write_xram: i_offset 0x0, i_bytes 32768, i_top 1, i_phy 1.
211.58008|FAPI|p10_load_iop_xram.C: subroutine_executor: SBE HWP invoking successful.
211.58009|FAPI|p10_load_iop_xram.C: p10_load_iop_xram: Successfully wrote PCIE img to XRAM: iop_top 1, phy 1.
211.59450|ISTEPS_TRACE|SUCCESS : proc_load_iop_xram
211.59450|PNOR|unloadSecureSection i_section = 4 (HCODE)
211.59458|ISTEPS_TRACE|call_proc_load_iop_xram exit
211.59657|ATTN_SLOW|I>checkForIplAttentions: 4 chips
211.59660|ATTN_SLOW|I>handleAttns 0 active( PRD)
211.59663|ATTN_SLOW|I>handleAttns 0 active( PRD)
211.59665|ATTN_SLOW|I>handleAttns 0 active( PRD)
211.59668|ATTN_SLOW|I>handleAttns 0 active( PRD)
211.59688|ERRL|I>Got an error log Msg - Type: 0x00000039
211.59689|ERRL|I>Flush message received
211.59690|INITSVC|<<doIstep: step 14, substep 3
211.59691|INITSVC|>>doIstep: step 14, substep 4, task proc_pcie_config
211.59693|1970/01/01 00:10:25|ISTEP 14. 4 - proc_pcie_config
211.60068|PLDM|I> >>resetWatchdogTimer
211.60681|PLDM|I> <<resetWatchdogTimer
211.60695|INITSVC|sendProgressCodeToBmc(): sending CC009384 progress code
211.61712|ISTEPS_TRACE|call_proc_pcie_config entry
211.61787|ISTEPS_TRACE|target HUID 00050000
211.66786|ISTEPS_TRACE|SUCCESS : proc_pcie_config
211.66786|ISTEPS_TRACE|target HUID 00050001
211.66964|ISTEPS_TRACE|SUCCESS : proc_pcie_config
211.66964|ISTEPS_TRACE|target HUID 00050002
211.67092|ISTEPS_TRACE|SUCCESS : proc_pcie_config
211.67092|ISTEPS_TRACE|target HUID 00050003
211.67234|ISTEPS_TRACE|SUCCESS : proc_pcie_config
211.67236|ISTEPS_TRACE|call_proc_pcie_config exit
211.67385|ATTN_SLOW|I>checkForIplAttentions: 4 chips
211.67388|ATTN_SLOW|I>handleAttns 0 active( PRD)
211.67390|ATTN_SLOW|I>handleAttns 0 active( PRD)
211.67392|ATTN_SLOW|I>handleAttns 0 active( PRD)
211.67394|ATTN_SLOW|I>handleAttns 0 active( PRD)
211.67413|ERRL|I>Got an error log Msg - Type: 0x00000039
211.67414|ERRL|I>Flush message received
211.67415|INITSVC|<<doIstep: step 14, substep 4
211.67416|INITSVC|>>doIstep: step 14, substep 5, task proc_setup_mmio_bars
211.67417|1970/01/01 00:10:25|ISTEP 14. 5 - proc_setup_mmio_bars
211.67804|PLDM|I> >>resetWatchdogTimer
211.68418|PLDM|I> <<resetWatchdogTimer
211.68431|INITSVC|sendProgressCodeToBmc(): sending CC009385 progress code
211.69216|ISTEPS_TRACE|call p10_setup_mmio_bars: Target HUID 00050000
211.70820|FAPI|p10_setup_mmio_bars.C: Start
211.73424|FAPI|p10_setup_mmio_bars.C: End
211.73425|ISTEPS_TRACE|SUCCESS: p10_setup_mmio_bars (chip HUID 0x00050000)
211.73425|ISTEPS_TRACE|call p10_setup_mmio_bars: Target HUID 00050001
211.73426|FAPI|p10_setup_mmio_bars.C: Start
211.73446|FAPI|p10_setup_mmio_bars.C: End
211.73447|ISTEPS_TRACE|SUCCESS: p10_setup_mmio_bars (chip HUID 0x00050001)
211.73447|ISTEPS_TRACE|call p10_setup_mmio_bars: Target HUID 00050002
211.73448|FAPI|p10_setup_mmio_bars.C: Start
211.73468|FAPI|p10_setup_mmio_bars.C: End
211.73469|ISTEPS_TRACE|SUCCESS: p10_setup_mmio_bars (chip HUID 0x00050002)
211.73469|ISTEPS_TRACE|call p10_setup_mmio_bars: Target HUID 00050003
211.73470|FAPI|p10_setup_mmio_bars.C: Start
211.73490|FAPI|p10_setup_mmio_bars.C: End
211.73491|ISTEPS_TRACE|SUCCESS: p10_setup_mmio_bars (chip HUID 0x00050003)
211.74110|ATTN_SLOW|I>checkForIplAttentions: 4 chips
211.74113|ATTN_SLOW|I>handleAttns 0 active( PRD)
211.74115|ATTN_SLOW|I>handleAttns 0 active( PRD)
211.74117|ATTN_SLOW|I>handleAttns 0 active( PRD)
211.74119|ATTN_SLOW|I>handleAttns 0 active( PRD)
211.74139|ERRL|I>Got an error log Msg - Type: 0x00000039
211.74139|ERRL|I>Flush message received
211.74140|INITSVC|<<doIstep: step 14, substep 5
211.74141|INITSVC|>>doIstep: step 14, substep 6, task host_secure_rng
211.74142|1970/01/01 00:10:25|ISTEP 14. 6 - host_secure_rng
211.74504|PLDM|I> >>resetWatchdogTimer
211.75218|PLDM|I> <<resetWatchdogTimer
211.75232|INITSVC|sendProgressCodeToBmc(): sending CC009386 progress code
211.76248|ISTEPS_TRACE|call_host_secure_rng entry
211.79332|FAPI|p10_rng_init_phase2.C: Start
211.80106|FAPI|p10_rng_init_phase2.C: End
211.80123|FAPI|p10_rng_init_phase2.C: Start
211.80127|FAPI|p10_rng_init_phase2.C: End
211.80144|FAPI|p10_rng_init_phase2.C: Start
211.80147|FAPI|p10_rng_init_phase2.C: End
211.80165|FAPI|p10_rng_init_phase2.C: Start
211.80168|FAPI|p10_rng_init_phase2.C: End
211.80905|ISTEPS_TRACE|call_host_secure_rng exit
211.81023|ATTN_SLOW|I>checkForIplAttentions: 4 chips
211.81026|ATTN_SLOW|I>handleAttns 0 active( PRD)
211.81028|ATTN_SLOW|I>handleAttns 0 active( PRD)
211.81030|ATTN_SLOW|I>handleAttns 0 active( PRD)
211.81032|ATTN_SLOW|I>handleAttns 0 active( PRD)
211.81051|ERRL|I>Got an error log Msg - Type: 0x00000039
211.81052|ERRL|I>Flush message received
211.81053|INITSVC|<<doIstep: step 14, substep 6
211.81054|INITSVC|>>doIstep: step 14, substep 7, task host_enable_memory_encryption
211.81055|1970/01/01 00:10:25|ISTEP 14. 7 - host_enable_memory_encryption
211.81421|PLDM|I> >>resetWatchdogTimer
211.82319|PLDM|I> <<resetWatchdogTimer
211.82332|INITSVC|sendProgressCodeToBmc(): sending CC009387 progress code
211.83148|ISTEPS_TRACE|>>call_host_enable_memory_encryption
211.83238|ISTEPS_TRACE|Memory encryption: Initializing keys for a total of 0 MCCs on node 0x00020000
211.83392|TARG|getBootCore: found 16 cores on boot proc,l_bootCore PIR:0x0
211.83392|TARG|found boot core: 0x0, PIR=0x0 :
211.85745|TARG|EntityPath
~[0x0000] 50687973 6963616c 3a2f5379 73302f4e Physical:/Sys0/N
~[0x0010] 6f646530 2f50726f 63302f45 51302f46 ode0/Proc0/EQ0/F
~[0x0020] 43302f43 6f726530 *C0/Core0 *
211.87173|FAPI|p10_ncu_enable_darn.C: >>p10_ncu_enable_darn
211.87177|FAPI|p10_ncu_enable_darn.C: <<p10_ncu_enable_darn
211.87245|ERRL|E>Error created : PLID=90000D8B, EID=90000D8B, RC=1761, Mod=36, Userdata=0000000000000000 0000000000000000, Sev=INFORMATIONAL
211.87248|ERRL|commitErrLog() called by 1700 for eid=90000d8b, Reasoncode=1761, Sev=INFORMATIONAL
211.87249|ERRL|>>ErrlManager::sendErrlogToMessageQueue
211.87250|ERRL|I>Send an error log to message queue to commit. eid=90000D8B
211.87250|ERRL|<<ErrlManager::sendErrlogToMessageQueue
211.87251|ISTEPS_TRACE|Memory encryption: setup_memory_crypto_keys succeeded
211.87278|ERRL|I>Got an error log Msg - Type: 0x00000030
211.87280|ERRL|>>saveErrLogToPnor eid=90000d8b
211.87327|ISTEPS_TRACE|<<call_host_enable_memory_encryption
211.87854|ATTN_SLOW|I>checkForIplAttentions: 4 chips
211.87895|ATTN_SLOW|I>handleAttns 0 active( PRD)
211.87897|ATTN_SLOW|I>handleAttns 0 active( PRD)
211.87899|ATTN_SLOW|I>handleAttns 0 active( PRD)
211.87902|ATTN_SLOW|I>handleAttns 0 active( PRD)
211.89100|ERRL|I>saveErrLogToPnor: 1012 bytes flattened into 0x89013000, slot 19
211.89711|ERRL|<<saveErrLogToPnor returning true
211.89713|ERRL|>>sendErrLogToBmc errlogId 0x90000D8B, i_isPrevBootErr 0
211.91965|ERRL|>>ackErrLogInPnor(90000d8b)
212.07274|ERRL|<<ackErrLogInPnor returning true
212.07275|ERRL|<<sendErrLogToBmc errlogId 0x90000D8B successfully sent
212.07276|ERRL|I>Got an error log Msg - Type: 0x00000039
212.07276|ERRL|I>Flush message received
212.07278|INITSVC|<<doIstep: step 14, substep 7
212.07278|INITSVC|>>doIstep: step 14, substep 8, task proc_exit_cache_contained
212.07279|1970/01/01 00:10:25|ISTEP 14. 8 - proc_exit_cache_contained
212.07570|PLDM|I> >>resetWatchdogTimer
212.08385|PLDM|I> <<resetWatchdogTimer
212.08399|INITSVC|sendProgressCodeToBmc(): sending CC009388 progress code
212.11264|HWAS_I|I>hwas.C: checkMinimumHardware entry
212.12034|HWAS_I|I>hwas.C: checkMinimumHardware: i_nodeOrSys 0x00010000
212.12066|HWAS_I|I>hwas.C: checkMinimumHardware: 8 functional and functionalOverride non-ECO FCs found
212.12067|HWAS_I|I>hwas.C: checkMinimumHardware: enough_cores_to_boot = TRUE
212.12068|HWAS_I|I>hwas.C: checkMinimumHardware: 7 valid cache FCs >= 2 needed : TRUE
212.13087|HWAS_I|I>hwas.C: checkMinimumHardware exit - minimum hardware available
212.13759|TARG|check_proc0_memory_config entry
212.14652|TARG|check_proc0_memory_config: 8 functional dimms behind proc0 00050000
212.15658|ISTEPS_TRACE|call_proc_exit_cache_contained:: Payload base address is 0x0000000000000000
212.15804|ISTEPS_TRACE|call_proc_exit_cache_contained:: Memory range : 0-802000000000
212.21338|MBOX|I>MailboxSp::_reclaimDmaBfrsFromFsp - Start. DmaBuffer =
~[0x0000] 00000000 00210000 00000000 e0210000 .....!.......!..
~[0x0010] ffffffff ffffffff 00000000 00000000 ................
~[0x0020] 00000000 00000000 00000000 00000000 ................
~[0x0030] 00000000 00000000 *........ *
212.23711|MBOX|I>MBOXSP Ignored request to suspend a disabled mailbox
212.23711|ISTEPS_TRACE|call_proc_exit_cache_contained:: draining interrupt Q
212.28721|FAPI_I|attribute_service.C: getTargetingAttr: Error from getTargetingAttrHelper for target 0x00010000 and attribute 0x55ddfeb
212.28738|ERRL|E>Error created : PLID=90000D8C, EID=90000D8C, RC=332A, Mod=0C, Userdata=FFFFFFFF00010000 00000000055DDFEB, Sev=UNRECOVERABLE
212.30483|FAPI_I|p10_exit_cache_contained.C: (fapi2::failIfPrivilegedfapi2::ATTR_PROC_FAVOR_AGGRESSIVE_PREFETCH_Privileged(), fapi2::Targetfapi2::ATTR_PROC_FAVOR_AGGRESSIVE_PREFETCH_TargetType(FAPI_SYSTEM), fapi2::checkIdTypefapi2::ATTR_PROC_FAVOR_AGGRESSIVE_PREFETCH_Type(fapi2::ATTR_PROC_FAVOR_AGGRESSIVE_PREFETCH, l_TGT1_ATTR_PROC_FAVOR_AGGRESSIVE_PREFETCH), fapi2::platAttrSvc::getTargetingAttr(FAPI_SYSTEM, (const TARGETING::ATTRIBUTE_ID)fapiToTargeting::fapi2::ATTR_PROC_FAVOR_AGGRESSIVE_PREFETCH, sizeof(l_TGT1_ATTR_PROC_FAVOR_AGGRESSIVE_PREFETCH), &(l_TGT1_ATTR_PROC_FAVOR_AGGRESSIVE_PREFETCH))) failed.
212.30484|FAPI_I|p10_exit_cache_contained.C: Error from mi initfile xscoms
212.30485|FAPI_I|p10_exit_cache_contained.C: Error from p10_exit_cache_contained_set_mc_initfile_inits (master)
212.30486|FAPI_I|plat_utils.C: rcToErrl: PLAT error: 0x02000001
212.30491|ISTEPS_TRACE|call_proc_exit_cache_contained:: failed in p10_exit_cache_contained do-while loop
212.30507|ERRL|E>Error created : PLID=90000D8D, EID=90000D8D, RC=1703, Mod=01, Userdata=90000D8C0000332A 0000000100000E08, Sev=UNRECOVERABLE
212.30509|ERRL|commitErrLog() called by 0900 for eid=90000d8c, Reasoncode=332A, Sev=UNRECOVERABLE
212.30510|ERRL|>>ErrlManager::sendErrlogToMessageQueue
212.30510|ERRL|I>Send an error log to message queue to commit. eid=90000D8C
212.30511|ERRL|<<ErrlManager::sendErrlogToMessageQueue
212.30513|MBOX|I>Mailbox function resumed
212.30513|ERRL|I>Got an error log Msg - Type: 0x00000030
212.30514|ERRL|WRN>> No callouts in elog 90000D8C
212.30514|ERRL|Adding default callout EPUB_PRC_HB_CODE
212.30515|ERRL|>>addProcedureCallout(0x55, 0x1)
212.30520|INITSVC|ERROR : task_wait_tid(0x25a). 'proc_exit_cache_contained', l_childerrl=0x1ae3598
212.30520|INITSVC|Error returned from istep : 90000D8D=1703
212.36574|================================================
212.38920|Error reported by fapi2 (0x3300) EID 0x90000D8C
212.40464| Invalid attribute read request
212.40464| ModuleId 0x0c fapi2::MOD_FAPI2_GET_TARGETING_ATTR
212.40464| ReasonCode 0x332a RC_INVALID_ATTRIBUTE
212.40465| UserData1 FAPI2 Target Type : 0xffffffff00010000
212.42123| UserData2 HB Target HUID : 0x00000000055ddfeb
212.42124|------------------------------------------------
212.42124| p10_exit_cache_contained
212.42125|------------------------------------------------
212.42125| Callout type : Procedure Callout
212.42125| Procedure : EPUB_PRC_HB_CODE
212.42126| Priority : SRCI_PRIORITY_LOW
212.42126|------------------------------------------------
212.42126| Hostboot Build ID: hostboot-p10-7e966f4/hbicore.bin
212.42127|================================================
212.42536|ERRL|>>saveErrLogToPnor eid=90000d8c
212.43419|ERRL|I>saveErrLogToPnor: 2664 bytes flattened into 0x89014000, slot 20
212.44231|ERRL|<<saveErrLogToPnor returning true
212.44236|ERRL|>>sendErrLogToBmc errlogId 0x90000D8C, i_isPrevBootErr 0
212.66831|ERRL|>>ackErrLogInPnor(90000d8c)
212.69722|PLDM|I> Handling inbound PLDM request
212.70964|PLDM|I> Invoking handler for category 2, message type 10, instance 0
212.72306|PLDM|>> handlePdrRepoChangeEventRequest
212.72306|PLDM|E> Invalid event class 0 in platform event handler
212.72323|ERRL|E>Error created : PLID=90000D8E, EID=90000D8E, RC=470B, Mod=0E, Userdata=0000000000000004 0000000000000000, Sev=INFORMATIONAL
212.72326|ERRL|>>addProcedureCallout(0x4, 0x6)
212.72327|ERRL|>>addProcedureCallout(0x55, 0x5)
212.72329|ERRL|commitErrLog() called by 4700 for eid=90000d8e, Reasoncode=470B, Sev=INFORMATIONAL
212.72329|ERRL|>>ErrlManager::sendErrlogToMessageQueue
212.72330|ERRL|I>Send an error log to message queue to commit. eid=90000D8E
212.72330|ERRL|<<ErrlManager::sendErrlogToMessageQueue
212.73627|PLDM|<< handlePdrRepoChangeEventRequest
212.85543|ERRL|<<ackErrLogInPnor returning true
212.85545|ERRL|<<sendErrLogToBmc errlogId 0x90000D8C successfully sent
212.85546|HWAS_I|I>hwasCallout.C: Procedure callout; proc 0x55 priority 0x1
212.85548|ERRL|I>Got an error log Msg - Type: 0x00000039
212.85549|ERRL|I>Flush message received
212.85550|INITSVC|<<doIstep: step 14, substep 8
212.85551|INITSVC|E>executeAllISteps: IStep Error on 14:8
212.85551|INITSVC|<<IStepDispatcher::executeAllISteps()
212.85553|INITSVC|ERROR: Failed executing all isteps, see 90000d8d for details
212.85555|INITSVC|IStepDispatcher finished.
212.85558|ERRL|I>Got an error log Msg - Type: 0x00000030
212.85561|ERRL|>>saveErrLogToPnor eid=90000d8e
212.86314|ERRL|I>saveErrLogToPnor: 1840 bytes flattened into 0x89015000, slot 21
212.87734|ERRL|<<saveErrLogToPnor returning true
212.87736|ERRL|>>sendErrLogToBmc errlogId 0x90000D8E, i_isPrevBootErr 0
212.90522|ERRL|>>ackErrLogInPnor(90000d8e)
212.91397|INITSVC|ERROR: task libistepdisp.so returned errlog=0x1ae3598
212.91398|INITSVC|ExtInitSvc: ERROR: return to initsvc with errlog 0x1ae3598
212.91425|INITSVC|ERROR: dispatching task, errorlog=0x0x1ae3598
212.91425|INITSVC|InitService: Committing errorlog 0x1ae3598
212.91426|ERRL|commitErrLog() called by 0500 for eid=90000d8d, Reasoncode=1703, Sev=UNRECOVERABLE
212.91427|ERRL|>>ErrlManager::sendErrlogToMessageQueue
212.91428|ERRL|I>Send an error log to message queue to commit. eid=90000D8D
212.91428|ERRL|<<ErrlManager::sendErrlogToMessageQueue
212.91429|INITSVC|InitService finished, shutdown = 0x90000d8c.
212.91429|INITSVC|_setShutdownStatus(i_status=0x0000000090000D8C)
212.91430|INITSVC|_doShutdown(i_status=0000000090000D8C)
212.91431|System shutting down with error status 0x90000D8C
212.91984|INITSVC|_doShutdown> status=0000000090000D8C
212.91985|INITSVC|notify priority=0x0, queue=0x1fd4008, msgType=0x0, componentID=0x4700
212.91985|PLDM|I> >>Invoking PLDM shutdown events
212.92972|PLDM|>> sendSensorStateChangedEvent (target = 0x00530000, state set = 1, sensor id = 21846, offset = 0, state = 1)
212.93174|PLDM|I> Sent Sensor State Changed Event successfully
212.93174|PLDM|<< sendSensorStateChangedEvent
212.93179|PLDM|>> sendSensorStateChangedEvent (target = 0x00530002, state set = 1, sensor id = 21847, offset = 0, state = 1)
212.94062|PLDM|I> Sent Sensor State Changed Event successfully
212.94062|PLDM|<< sendSensorStateChangedEvent
212.94067|PLDM|>> sendSensorStateChangedEvent (target = 0x00530006, state set = 1, sensor id = 21848, offset = 0, state = 1)
212.95016|PLDM|I> Sent Sensor State Changed Event successfully
212.95016|PLDM|<< sendSensorStateChangedEvent
212.95021|PLDM|>> sendSensorStateChangedEvent (target = 0x00530008, state set = 1, sensor id = 21849, offset = 0, state = 1)
212.95838|PLDM|I> Sent Sensor State Changed Event successfully
212.95839|PLDM|<< sendSensorStateChangedEvent
212.95843|PLDM|>> sendSensorStateChangedEvent (target = 0x0053000a, state set = 1, sensor id = 21850, offset = 0, state = 1)
212.96694|PLDM|I> Sent Sensor State Changed Event successfully
212.96695|PLDM|<< sendSensorStateChangedEvent
212.96701|PLDM|>> sendSensorStateChangedEvent (target = 0x0053000c, state set = 1, sensor id = 21851, offset = 0, state = 1)
212.97696|PLDM|I> Sent Sensor State Changed Event successfully
212.97697|PLDM|<< sendSensorStateChangedEvent
212.97702|PLDM|>> sendSensorStateChangedEvent (target = 0x0053000d, state set = 1, sensor id = 21852, offset = 0, state = 1)
212.98550|PLDM|I> Sent Sensor State Changed Event successfully
212.98550|PLDM|<< sendSensorStateChangedEvent
212.98555|PLDM|>> sendSensorStateChangedEvent (target = 0x0053000e, state set = 1, sensor id = 21853, offset = 0, state = 1)
212.99401|PLDM|I> Sent Sensor State Changed Event successfully
212.99401|PLDM|<< sendSensorStateChangedEvent
212.99412|PLDM|>> sendSensorStateChangedEvent (target = 0x00530020, state set = 1, sensor id = 21854, offset = 0, state = 1)
213.00295|PLDM|I> Sent Sensor State Changed Event successfully
213.00295|PLDM|<< sendSensorStateChangedEvent
213.00305|PLDM|>> sendSensorStateChangedEvent (target = 0x00530022, state set = 1, sensor id = 21855, offset = 0, state = 1)
213.01153|PLDM|I> Sent Sensor State Changed Event successfully
213.01154|PLDM|<< sendSensorStateChangedEvent
213.01164|PLDM|>> sendSensorStateChangedEvent (target = 0x00530023, state set = 1, sensor id = 21856, offset = 0, state = 1)
213.02008|PLDM|I> Sent Sensor State Changed Event successfully
213.02008|PLDM|<< sendSensorStateChangedEvent
213.02019|PLDM|>> sendSensorStateChangedEvent (target = 0x00530025, state set = 1, sensor id = 21857, offset = 0, state = 1)
213.02858|PLDM|I> Sent Sensor State Changed Event successfully
213.02858|PLDM|<< sendSensorStateChangedEvent
213.02868|PLDM|>> sendSensorStateChangedEvent (target = 0x00530028, state set = 1, sensor id = 21858, offset = 0, state = 1)
213.03673|PLDM|I> Sent Sensor State Changed Event successfully
213.03673|PLDM|<< sendSensorStateChangedEvent
213.03683|PLDM|>> sendSensorStateChangedEvent (target = 0x0053002b, state set = 1, sensor id = 21859, offset = 0, state = 1)
213.04491|PLDM|I> Sent Sensor State Changed Event successfully
213.04491|PLDM|<< sendSensorStateChangedEvent
213.04501|PLDM|>> sendSensorStateChangedEvent (target = 0x0053002d, state set = 1, sensor id = 21860, offset = 0, state = 1)
213.05316|PLDM|I> Sent Sensor State Changed Event successfully
213.05316|PLDM|<< sendSensorStateChangedEvent
213.05326|PLDM|>> sendSensorStateChangedEvent (target = 0x0053002e, state set = 1, sensor id = 21861, offset = 0, state = 1)
213.06118|PLDM|I> Sent Sensor State Changed Event successfully
213.06118|PLDM|<< sendSensorStateChangedEvent
213.06122|PLDM|>> sendSensorStateChangedEvent (target = 0x00050000, state set = 1, sensor id = 21873, offset = 0, state = 1)
213.06974|PLDM|I> Sent Sensor State Changed Event successfully
213.06974|PLDM|<< sendSensorStateChangedEvent
213.06981|PLDM|>> sendSensorStateChangedEvent (target = 0x00050001, state set = 1, sensor id = 21874, offset = 0, state = 1)
213.07828|PLDM|I> Sent Sensor State Changed Event successfully
213.07828|PLDM|<< sendSensorStateChangedEvent
213.07837|PLDM|>> sendSensorStateChangedEvent (target = 0x00050002, state set = 1, sensor id = 21875, offset = 0, state = 1)
213.08687|PLDM|I> Sent Sensor State Changed Event successfully
213.08688|PLDM|<< sendSensorStateChangedEvent
213.08699|PLDM|>> sendSensorStateChangedEvent (target = 0x00050003, state set = 1, sensor id = 21876, offset = 0, state = 1)
213.09586|PLDM|I> Sent Sensor State Changed Event successfully
213.09587|PLDM|<< sendSensorStateChangedEvent
213.09589|PLDM|>> sendSensorStateChangedEvent (target = 0x00030000, state set = 1, sensor id = 21877, offset = 0, state = 1)
213.10740|PLDM|I> Sent Sensor State Changed Event successfully
213.10741|PLDM|<< sendSensorStateChangedEvent
213.10742|PLDM|>> sendSensorStateChangedEvent (target = 0x00030004, state set = 1, sensor id = 21878, offset = 0, state = 1)
213.11896|PLDM|I> Sent Sensor State Changed Event successfully
213.11897|PLDM|<< sendSensorStateChangedEvent
213.11899|PLDM|>> sendSensorStateChangedEvent (target = 0x00030008, state set = 1, sensor id = 21879, offset = 0, state = 1)
213.12554|ERRL|<<ackErrLogInPnor returning true
213.12556|ERRL|<<sendErrLogToBmc errlogId 0x90000D8E successfully sent
213.12557|ERRL|I>Got an error log Msg - Type: 0x00000030
213.12557|ERRL|WRN>> No callouts in elog 90000D8D
213.12558|ERRL|Adding default callout EPUB_PRC_HB_CODE
213.12558|ERRL|>>addProcedureCallout(0x55, 0x1)
213.13111|PLDM|I> Sent Sensor State Changed Event successfully
213.13111|PLDM|<< sendSensorStateChangedEvent
213.13113|PLDM|>> sendSensorStateChangedEvent (target = 0x0003000c, state set = 1, sensor id = 21880, offset = 0, state = 1)
213.14262|PLDM|I> Sent Sensor State Changed Event successfully
213.14263|PLDM|<< sendSensorStateChangedEvent
213.14265|PLDM|>> sendSensorStateChangedEvent (target = 0x00030010, state set = 1, sensor id = 21881, offset = 0, state = 1)
213.14948|================================================
213.14949|Error reported by istep (0x1700) EID 0x90000D8D
213.15451|PLDM|I> Sent Sensor State Changed Event successfully
213.15451|PLDM|<< sendSensorStateChangedEvent
213.15453|PLDM|>> sendSensorStateChangedEvent (target = 0x00030014, state set = 1, sensor id = 21882, offset = 0, state = 1)
213.16631|PLDM|I> Sent Sensor State Changed Event successfully
213.16631|PLDM|<< sendSensorStateChangedEvent
213.16633|PLDM|>> sendSensorStateChangedEvent (target = 0x00030018, state set = 1, sensor id = 21883, offset = 0, state = 1)
213.17274| IStep failed, Check other log(s) with the same PLID for reason.
213.17275| ModuleId 0x01 MOD_REPORTING_ERROR
213.17275| ReasonCode 0x1703 RC_FAILURE
213.17275| UserData1 eid of first error : 0x90000d8c0000332a
213.17276| UserData2 Reason code of first error : 0x0000000100000e08
213.17276|------------------------------------------------
213.17277| proc_exit_cache_contained
213.17277|------------------------------------------------
213.17277| Callout type : Procedure Callout
213.17278| Procedure : EPUB_PRC_HB_CODE
213.17278| Priority : SRCI_PRIORITY_LOW
213.17278|------------------------------------------------
213.17279| Hostboot Build ID: hostboot-p10-7e966f4/hbicore.bin
213.17279|================================================
213.17873|ERRL|>>saveErrLogToPnor eid=90000d8d
213.17915|PLDM|I> Sent Sensor State Changed Event successfully
213.17916|PLDM|<< sendSensorStateChangedEvent
213.17918|PLDM|>> sendSensorStateChangedEvent (target = 0x0003001c, state set = 1, sensor id = 21884, offset = 0, state = 1)
213.18564|ERRL|I>saveErrLogToPnor: 840 bytes flattened into 0x89016000, slot 22
213.19071|PLDM|I> Sent Sensor State Changed Event successfully
213.19072|PLDM|<< sendSensorStateChangedEvent
213.19074|PLDM|>> sendSensorStateChangedEvent (target = 0x00030080, state set = 1, sensor id = 21885, offset = 0, state = 1)
213.19788|ERRL|<<saveErrLogToPnor returning true
213.19789|ERRL|>>sendErrLogToBmc errlogId 0x90000D8D, i_isPrevBootErr 0
213.20397|PLDM|I> Sent Sensor State Changed Event successfully
213.20397|PLDM|<< sendSensorStateChangedEvent
213.20399|PLDM|>> sendSensorStateChangedEvent (target = 0x00030084, state set = 1, sensor id = 21886, offset = 0, state = 1)
213.22420|ERRL|>>ackErrLogInPnor(90000d8d)
213.23131|PLDM|I> Sent Sensor State Changed Event successfully
213.23131|PLDM|<< sendSensorStateChangedEvent
213.23133|PLDM|>> sendSensorStateChangedEvent (target = 0x00030088, state set = 1, sensor id = 21887, offset = 0, state = 1)
213.24385|PLDM|I> Sent Sensor State Changed Event successfully
213.24386|PLDM|<< sendSensorStateChangedEvent
213.24388|PLDM|>> sendSensorStateChangedEvent (target = 0x0003008c, state set = 1, sensor id = 21888, offset = 0, state = 1)
213.25638|PLDM|I> Sent Sensor State Changed Event successfully
213.25639|PLDM|<< sendSensorStateChangedEvent
213.25641|PLDM|>> sendSensorStateChangedEvent (target = 0x00030090, state set = 1, sensor id = 21889, offset = 0, state = 1)
213.26891|PLDM|I> Sent Sensor State Changed Event successfully
213.26891|PLDM|<< sendSensorStateChangedEvent
213.26893|PLDM|>> sendSensorStateChangedEvent (target = 0x00030094, state set = 1, sensor id = 21890, offset = 0, state = 1)
213.28143|PLDM|I> Sent Sensor State Changed Event successfully
213.28144|PLDM|<< sendSensorStateChangedEvent
213.28146|PLDM|>> sendSensorStateChangedEvent (target = 0x00030098, state set = 1, sensor id = 21891, offset = 0, state = 1)
213.29398|PLDM|I> Sent Sensor State Changed Event successfully
213.29398|PLDM|<< sendSensorStateChangedEvent
213.29400|PLDM|>> sendSensorStateChangedEvent (target = 0x0003009c, state set = 1, sensor id = 21892, offset = 0, state = 1)
213.30650|PLDM|I> Sent Sensor State Changed Event successfully
213.30651|PLDM|<< sendSensorStateChangedEvent
213.30651|PLDM|I> <<Finished invoking PLDM shutdown events
213.30653|INITSVC|notify priority=0x0, queue=0x1ffe888, msgType=0x40000000, componentID=0x1500
213.30867|INITSVC|notify priority=0x10, queue=0x1e08a58, msgType=0x5, componentID=0xb00
213.36234|TARG|I>AttrRP: attrSyncTask: Received message of type = 0x00000005.
213.36235|TARG|I>AttrRP: attrSyncTask: Shutdown attribute sync.
213.36237|TARG|I>_invokeAttrSync: iv_attrSyncPrimed=1 iv_attrSyncWindowOpen=1
213.36238|TARG|I>_invokeAttrSync: Calling devtree attribute sync for BMC.
213.45911|DEVTREE|>>DEVTREE::devtreeSyncAttrs
213.45912|devtree|Syncing to BMC
213.55529|ERRL|<<ackErrLogInPnor returning true
213.55530|ERRL|<<sendErrLogToBmc errlogId 0x90000D8D successfully sent
213.55530|HWAS_I|I>hwasCallout.C: Procedure callout; proc 0x55 priority 0x1
215.29878|DEVTREE|<<DEVTREE::devtreeSyncAttrs
215.29879|TARG|>>AttrRP::updatePreservedAttrSection
215.29880|PNOR|loadSecureSection i_section = 7 (HBD)
215.62962|TARG|<<AttrRP::updatePreservedAttrSection
215.62963|INITSVC|notify priority=0x10, queue=0x1ffebf8, msgType=0x33, componentID=0x100
215.62964|ERRL|I>Got an error log Msg - Type: 0x00000033
215.62964|ERRL|I>Shutdown event received
215.62965|INITSVC|notify priority=0x10, queue=0x1fc4b28, msgType=0x4, componentID=0x2b00
215.62967|INITSVC|notify priority=0x13, queue=0x1dec378, msgType=0x5, componentID=0xf00
215.62967|INTR|Shutdown event received
215.62968|INTR|IntrRp::shutDown - Sending shutdown message to registered handlers
215.62969|SBEIO|psudd: SbePsu::msgHandler Handle Shutdown
215.62970|MBOX|I>Shutdown Message sent for IPC, ignoring.
215.62987|ERRL|I>Shutdown event processed
215.62994|INTR|Reset PSIHB Interrupt Space
215.63000|INTR|INTR: Target 00050001. PSI BRIDGE ESB BAR value: 0x0006430202000000
215.63005|INTR|INTR: Target 00050002. PSI BRIDGE ESB BAR value: 0x0006830202000000
215.63010|INTR|INTR: Target 00050003. PSI BRIDGE ESB BAR value: 0x0006c30202000000
215.63013|INTR|Reset PSIHB INTR Complete
215.63015|INTR|INTR: Target 00050000. PSI BRIDGE ESB BAR value: 0x0006030202000000
215.63018|INTR|I>INTR is shutdown
215.63019|INITSVC|notify priority=0x7f, queue=0x1fff888, msgType=0x2, componentID=0x1300
215.63862|INITSVC|notify priority=0x7f, queue=0x1ffe888, msgType=0x40000000, componentID=0x1500
215.63937|INITSVC|Begin virtual mem flush
215.64175|INITSVC|flushing virtual memory 0x101f000
215.64178|INITSVC|flushing virtual memory 0xa1000000
215.64179|INITSVC|flushing virtual memory 0xa0000000
215.64180|INITSVC|flushing virtual memory 0x9f000000
215.64180|INITSVC|flushing virtual memory 0x9e000000
215.64181|INITSVC|flushing virtual memory 0x9d000000
215.64185|INITSVC|flushing virtual memory 0x9c000000
215.64186|INITSVC|flushing virtual memory 0x9a000000
215.64186|INITSVC|flushing virtual memory 0x99000000
215.64187|INITSVC|flushing virtual memory 0x98000000
215.64187|INITSVC|flushing virtual memory 0x97000000
215.64188|INITSVC|flushing virtual memory 0x93000000
215.64188|INITSVC|flushing virtual memory 0x92000000
215.64189|INITSVC|flushing virtual memory 0x90000000
215.64189|INITSVC|flushing virtual memory 0x8f000000
215.64190|INITSVC|flushing virtual memory 0x8d000000
215.64191|INITSVC|flushing virtual memory 0x8c000000
215.64191|INITSVC|flushing virtual memory 0x89000000
215.64192|INITSVC|flushing virtual memory 0x88000000
215.64192|INITSVC|flushing virtual memory 0x87000000
215.64217|INITSVC|flushing virtual memory 0x86000000
215.64219|INITSVC|flushing virtual memory 0x85000000
215.64219|INITSVC|flushing virtual memory 0x84000000
215.64222|INITSVC|flushing virtual memory 0x83000000
215.64222|INITSVC|flushing virtual memory 0x82000000
215.64223|INITSVC|flushing virtual memory 0x81000000
215.64418|INITSVC|Do post mem flush callbacks
215.64418|PNOR|PnorRP::Shutdown message recieved
215.65420|INITSVC|_doShutdown>
from hostboot.
dcrowell77
commented on August 16, 2024
This kind of error tends to be a problem with patching the system. Was this a complete flash build or were there code patches involved?
from hostboot.
lili-lilili
commented on August 16, 2024
This kind of error tends to be a problem with patching the system. Was this a complete flash build or were there code patches involved?
Hi dcrowell：
There is no extended patch.
I did a full compilation with op-build ibm-release-fw1020 branch(https://github.com/open-power/op-build/tree/ibm-release-fw1020)。
from hostboot.
dcrowell77
commented on August 16, 2024
How did you package the op-build output into the BMC image? That is where I suspect a problem. The attribute data comes from a lid on the BMC. If you run pldmtool bios GetBIOSAttributeCurrentValueByHandle -a hb_lid_ids and look for the HBD entry it will tell you the specific lid that holds our attributes.
The failing attribute is ATTR_PROC_FAVOR_AGGRESSIVE_PREFETCH (see obj/genfiles/attributeenums.H in the hostboot tree for the decode). I know that attribute was added pretty recently. I suspect that you haven't properly integrated the op-build into the BMC image correctly somehow such that your BMC image is using an older version of the data than the Hostboot code expects. (That part of the flow is not my area of expertise.)
from hostboot.
lili-lilili
commented on August 16, 2024
How did you package the op-build output into the BMC image? That is where I suspect a problem. The attribute data comes from a lid on the BMC. If you run
pldmtool bios GetBIOSAttributeCurrentValueByHandle -a hb_lid_idsand look for the HBD entry it will tell you the specific lid that holds our attributes.The failing attribute is ATTR_PROC_FAVOR_AGGRESSIVE_PREFETCH (see obj/genfiles/attributeenums.H in the hostboot tree for the decode). I know that attribute was added pretty recently. I suspect that you haven't properly integrated the op-build into the BMC image correctly somehow such that your BMC image is using an older version of the data than the Hostboot code expects. (That part of the flow is not my area of expertise.)
Thanks a lot, this is indeed a problem caused by lid mapping。
from hostboot.
Related Issues (20)
- Does hostboot only read Lid files from running DIR？ HOT 1
- About Simics HOT 2
- How can I trigger this function HOT 10
- Hostboot boot fail without inserting TPM card HOT 15
- checkstop: PC timebase Facility HOT 1
- About libconsole.so HOT 3
- Why do different L2 caches react differently to the same data in the "L2 Error Injection Register" after error injection? HOT 5
- About istep16.01 "host_activate_boot_core" HOT 1
- What is the purpose of calling the ”platCreateGardRecord“ function to create Ephemeral gard records for BMC system？ HOT 2
- Is there a register on P10 that can directly adjust "write delay values for one of the MEMINTDnnB pins" HOT 2
- About intvect_system_reset_external HOT 2
- CDD_ChA_RR_3_2? CDD_ChB_RR_3_2 HOT 1
- HTMGT failed to reload occ image during runtime for P10. HOT 12
- Where is the variable "iv_occsStarted" set to true during the runtime for P10 opal? HOT 4
- Will the check_reset_count function of P10 be periodically called? HOT 2
- Does the FSP based system support the attribute override HOT 2
- Will Mcbist check all addresses of all DIMMs? HOT 5
- Does the ATTR value be saved to the PNOR flash when setting it in the Hostboot Runtime? HOT 2
- If the sentence 'done' is false after execution, how will subsequent TdEntries be executed HOT 1
- Why does the CPU frequency still decrease after a successful OCC reset? HOT 2
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from hostboot.