Comments (26)
mefistotelis
commented on June 30, 2024
Thats what i get from the serial port on the drone
serial log - Click to expand
101 [FDI AHRS[1]]:ah___i+i+ begi+KÎU5h
ÿÿ 102 [FDI AHRS[1]]:bia_ fdi ++_+ -+UU5h
ÿÿ 102 [FDI AHRS[1]]:i+i+ fdi ++_+ -+Š-U:-
ÿÿ 102 [FDI AHRS[1]]:+ai+ f-_ _e+_-_ chec++ÙUHW
ÿÿ 111 [LED] cha+ged: +e+-e_a++_e +-+ _eady +he+ _+a_++-ûºU:-
ÿÿ 121 Ba++e_y +a+e :ATL NVT DJ005
�ÙU2
ÿÿ 121 +a++fac++_e Da+e:2016/3/3
Ó)U-ò
ÿÿ 121 Se_ia+ +++be_ :354
KªU-ò
ÿÿ+gi+ba+ -i+ch 0, _-++ 0, ya+ 0+-U<Ú
ÿÿdfi++e___c_i+-++__-++, b+++e_+-_+h fi__+ -_de_Õ-U7ù
ÿÿd --fc: 10.000000 hz, de+ay: 15.915494 +_¢¶U=
ÿÿdfi++e___c_i+-++_-i+ch, b+++e_+-_+h fi__+ -_de_SU7ù
ÿÿd --fc: 10.000000 hz, de+ay: 15.915494 +_¢¶U;´
ÿÿdfi++e___c_i+-++_ya+, b+++e_+-_+h fi__+ -_de_2ÀU7ù
ÿÿd --fc: 10.000000 hz, de+ay: 15.915494 +_¢¶U@!
ÿÿdfi++e___c_i+-++_+h_-+++e, b+++e_+-_+h fi__+ -_de_+IU7ù
ÿÿd --fc: 10.000000 hz, de+ay: 15.915494 +_¢¶UEÞ
ÿÿ 155 -+d.IOC _e_e+ i++e++ige+ce_UfJ
ÿÿ 155 [_+a_+_ba++e_y]+hi_ fi_e+a_e ca+c g-h+e _-eed:7.800000 - +a+d _-eed:2.500000
%AU7ù
ÿÿ 155 CTRL _e_e+ a++ by _c +-de _+i+chæU=
ÿÿ 155 [C+_+<1>] REQ_RC_NORMAL ATTI c+_+_a++ióU0—
ÿÿ 161 Ee-_-+ +_i+e -ff_e+:1d0
'|U-ò
ÿÿ 183 [LED] cha+ged: +- a++iTJU-ò
ÿÿ+gi+ba+ -i+ch 0, _-++ 0, ya+ 0+-UK
ÿÿ 233 c-+++e_: 0 +i+e-++_c-+++e_0
chec+_c-++__+a+e 0
¦˜U>K
ÿÿ 233 g-_ i+i+: +ac+:0 ac+:18 fa+_e_f+ag:0
h/UD
ÿÿ 243 [FDI AHRS[1]]:(+|yz)+ai+ f-_ _+a+ic +he+ i+i+•9U-ò
ÿÿ+gi+ba+ -i+ch 0, _-++ 0, ya+ 0+-U-ò
ÿÿ+gi+ba+ -i+ch 0, _-++ 0, ya+ 0+-U-ò
ÿÿ+gi+ba+ -i+ch 0, _-++ 0, ya+ 0+-U3Â
ÿÿ 450 [FDI AHRS[1]]:ah___i+i+ -a__ÙU;´
ÿÿ 451 [FDI AHRS[1]]:e+a++a+i-+ fdi ++_+ -+§ÛU8á
ÿÿ 463 [LED] cha+ged: _c c-+-+e+e+y +-_+yTU0—
ÿÿ+gi+ba+ -i+ch 0, _-++ 0, ya+ -119h/U0—
ÿÿ+gi+
The string you've inserted looks unencrypted, just garbled a bit by not fully matched transmission parameters.
The strings match to messages within the flight controller firmware. Looks like all the messages which go to flight log are also sent to the serial port.
from dji-firmware-tools.
notsolowki
commented on June 30, 2024
ive tried alot of different parameters only thing i could get any english on was 115200 8n1 what do you suppose i do. i see in the ubifs drivers for a pl2303. i cant send any break commands or any command for that matter though that usb port.
from dji-firmware-tools.
mefistotelis
commented on June 30, 2024
Maybe there's parity in the transmission. But first we need to gen an ungarbled output, then we may look into input.
Maybe try 7n2 ?
from dji-firmware-tools.
notsolowki
commented on June 30, 2024
serial log - Click to expand
7n2U4¬
ÿÿ 0 ee--+ +-ad 4 128 132 136ðU4¬ ÿÿ 0 ee-_-+ +-ad 5 264 128 136‚U4¬ ÿÿ 0 ee-_-+ +-ad 6 400 12 16¯U4¬ ÿÿ 0 ee-_-+ +-ad 7 416 40 48·U4¬ ÿÿ 0 ee-_-+ +-ad 8 464 9 16(KU4¬ ÿÿ 0 ee-_-+ +-ad 9 480 1 8bõU4¬ ÿÿ 0 ee-_-+ +-ad 10 488 6 16ÐãU4¬ ÿÿ 0 ee-_-+ +-ad 11 504 4 8%ÝU4¬ ÿÿ 0 ee-_-+ +-ad 12 512 52 56¸]U4¬ ÿÿ 0 ee-_-+ +-ad 13 568 8 16Œ4¬ ÿÿ 0 ee-_-+ +-ad 14 584 7 16IMU4¬ ÿÿ 0 ee-_-+ +-ad 15 600 12 16ÜU4¬ ÿÿ 0 ee-_-+ +-ad 16 616 38 48æ¯U4¬ ÿÿ 0 ee-_-+ +-ad 17 664 12 16„äU4¬ ÿÿ 0 ee-_-+ +-ad 18 680 56 64<çU4¬ ÿÿ 0 ee-_-+ +-ad 19 744 32 40+U4¬ ÿÿ 0 ee-_-+ +-aìU4¬ 784 1 8 ÿÿ 0 ee-_-+ +-ad 21 792 16 240zU4¬ ÿÿ 0 ee-_-+ +-ad 22 816 16 24ÛýU4¬ ÿÿ 0 ee-_-+ +-ad 23 840 1 8R}U4¬ ÿÿ 0 ee-_-+ +-ad 24 848 1 8“U4¬ ÿÿ 0 ee-_-+ +-ad 25 856 10 16[U4¬ ÿÿ 0 ee-_-+ +-ad 26 872 36 40©U4¬ ÿÿ 0 ee-_-+ +-ad 27 912 52 56iU4¬ ÿÿ 0 ee-_-+ +-ad 28 968 44 48–éU4¬ ÿÿ 0 ee-_-+ +-ad 29 1016 28 32âJU4¬ ÿÿ 0 ee-_-+ +-ad 30 1048 18 24–¸U4¬ ÿÿ 0 ee-_-+ +-ad 31 1072 16 24(U4¬ ÿÿ 0 ee-_-+ +-ad 32 1096 72 80$KU4¬ ÿÿ 0 ee-_-+ +-ad 33 1176 24 32ýÀU4¬ ÿÿ 0 ee-_-+ +-ad 34 1208 64 723SU4¬ ÿÿ 0 ee-_-+ +-ad 35 1280 24 32U4¬ ÿÿ 0 ee-_-+ +-ad 36 1312 96 104û�U8á ÿÿdfi++e_-a+g++a__+e+, b+++e_+-_+h 2+d -_de_çŸU7ù ÿÿd --fc: 20.000000 hz, de+ay: 11.252254 +_!–UD ÿÿdfi++e_-a+g++a__acc, +_ac+i+g diffe_e++ia+-_ 2+d -_de_î¿UK ÿÿd --fc1: 15.000000 hz, fc2: 30.000000 hz, de+ay: 15.003007 +_ç+U7ù ÿÿdfi++e_-+i+ea__acc, b+++e_+-_+h 2+d -_de_$U7ù ÿÿd --fc: 15.000000 hz, de+ay: 15.003007 +_×½UŠ ÿÿd+-+-_ i+i+ c-ef0TUI“ ÿÿd0 _-++:-0.707107 -i+ch:0.707107 ya+:1.000000 +if+:1.000000úUI“ ÿÿd1 _-++:0.707107 -i+ch:0.707107 yUK ÿÿd3 _-++:-0.707107 -i+ch:-0.707107 ya+:-1.000000 +if+:1.000000IU/c ÿÿdc_af+ c-+fig+_a+i-+ +-+-_ c-ef ›+UI“ ÿÿd0 _-++:-0.707107 -i+ch:0.707107 ya+:0.000000 +if+:1.000000d_UI“ ÿÿd1 _-++:0.707107 -i+ch:0.707107 ya+:-0.000000 +if+:1.000000î;UI“ ÿÿd2 _-++:0.707107 -i+ch:-0.707107 ya+:0.000000 +if+:1.000000{UK ÿÿd3 _-++:-0.707107 -i+ch:-0.707107 ya+:-0.000000 +if+:1.000000€ŠUHW ÿÿd4 _-++:0.000000 -i+ch:0.000000 ya+:0.000000 +if+:0.000000ÎUHW ÿÿd5 _-++:0.00UI“ ÿÿd2 _-++:0.353553 -i+ch:-0.353553 ya+:0.000000 +if+:0.2500003JUK ÿÿd3 _-++:-0.353553 -i+ch:-0.353553 ya+:-0.000000 +if+:0.250000¢ýUHW ÿÿd4 _-++:0.000000 -i+ch:0.000000 ya+:0.000000 +if+:0.000000ÎUHW ÿÿd5 _-++:0.000000 -i+ch:0.000000 ya+:0.000000 +if+:0.000000„ãUHW ÿÿd6 _-++:0.000000 -i+ch:0.000000 ya+:0.000000 +if+:0.000000KôUHW ÿÿd7 _-++:0.000000 -i+ch:0.000000 ya+:0.000000 +if+:0.000000UN ÿÿdc_af+ +-de+ i+f-®ªU2 ÿÿdI|:0.005591 Iy:0.005591 Iz:0.011U5h ÿÿ 0 +i_ ca+i 55 55 674d fff0 c++:0 ,U#. ÿÿ 0 i++ _+a++_:0-U\€ ÿÿ 0 [ha_dfa+++]:******************chec+ fa+++ i+f- a+d +_ace ************ì¥U]D ÿÿ 0 [ha_dfa+++]:-----fa+++ i_ ++++: add_(0|40024000),f+ag(0|00723b69)-----ÖÃU]D ÿÿ 0 [ha_dfa+++]:-----fa+++ i_ ++++: add_(0|400241a0),f+ag(0|da2e493b)-----æÒUb- ÿÿ 0 [ha_dfa+++]:-----+a_+ i+f- i_ ++++: add_(0|40024340),f+ag(0|cc8ad971)-----ÎÚUcµ ÿÿ 0 [ha_dfa+++]:-----+_ace i+f-Ucµ ÿÿ 0 [ha_dfa+++]:-----+_ace i+f- i_ ++++: add_(0|40024790),f+ag(0|a3abfa90)-----ËùUe ÿÿ 0 [ha_dfa+++]:-----+dg_+i+e_i+f- i_ ++++: add_(0|40024a50),f+ag(0|add18bec)-----¬U( ÿÿ 0 _+a_++-:4.56725 ½\U&Ñ ÿÿ 0 B-a_d:"++320+2"¯U)É ÿÿ[> ai_--_+ +i+i+ i+i+ed [1]üšU.§ ÿÿ 1 ai_--_+ +i+i+ i+i+ed[1]/{U' ÿÿ[[0][0][1][804][1][10086]¹ Uß ÿÿ[>e+d -f db:[1]üòU0— ÿÿ 1 c-+-a__ ca+ib_a+i-+ i+i+!8GU;´ ÿÿ 1 [LED] cha+ged: +e_+ +ed +he+ _+a_++-+UB° ÿÿ 1 a-- c-++ec+ cha+ged:+a_+(255) != c+__e++(0)7ÅUHW ÿÿ 1 a__i_+a++ c-++ec+ cha+ged:+a_+(255) != c+__e++(0)XRU8á ÿÿdfi++e__+-+-__-++, b+++e_+-_+h fi__+ -_de_ŸCU7ù ÿÿd --fc: 100.000000 hz, de+ay: 1.591549 +_ºªU2 ÿÿ 1 [FDI MAGN[1]] e+e++:++_+ -+œU2 ÿÿ 1 [FDI GYRO[1]] e+e++:++_+ -+˜U1S ÿÿ 1 [FDI ACC[1]] e+e++:++_+ -+ó\U2 ÿÿ 1 [FDI BARO[1]] e+e++:++_+ -+¥�U,6 ÿÿ 1 [FDI AHRS[1]]:++_+ -+B�U0— ÿÿ 1 [FDI CTRL] e+e++: ++_+ -+JãU?� ÿÿ 1 +e+- ca+i (0.000000,0.000000) 0 f+:4 4 +øUà
ÿÿ 1 +e+- ca+i 0 b+:0.000000 0.000000 0.000000 ba:0.000000 0.000000 0.000000
�+UF‹
ÿÿ 1 a-- +e+- ca+i (22.000000,65.000000) aa f+:6 6
'ÑUh–
ÿÿ 1 a-- +e+- ca+i aa b+:0.000212 -0.000181 0.000096 ba:-0.000084 0.000284 -0.002604
ÑJU@!
ÿÿ 2 a-- c-++ec+ cha+ged:+a+(0) != c+e++(1)O¾U]D
ÿÿ 4 [e_c_i_+a++] +a++ cha+ged: +a_+(0|ffffffff) != c+e++(0|00000000)½eU]D
ÿÿ 4 [e_c_i__e+-+y] +a++ cha+ged: +a+(0|ffffffff) != c+e++(0|00000000)‡åU1S
ÿÿ 10 [FDI GPS[1]] e+e++:+++ -+$ßU1S
ÿÿ 13 ecei+ed -+/-ff 2 f-+ a--ˆU@!
ÿÿ 13 CTRL e_e+ a++ by APP.+i__i-+.e-+e+.-ffTÈUœ
ÿÿ 13 ac+ -+/-ff 0 +- a--бU1S
ÿÿ 18 ecei+ed -+/-ff 2 f-+ a--5ëU@!
ÿÿ 18 CTRL _e_e+ a++ by APP.+i__i-+.e-+e+.-ffðbUœ
ÿÿ 18 ac+ -+/-ff 0 +- a--› UN
ÿÿ+i+ez-+e e+:-60GAU'
ÿÿ
-+e_y ha_h fai+ 6ad4c516|¼U%„
ÿÿ 43 ESC0 +i++ +-
ÒQU%„
ÿÿ 44 ESC1 +i++ +-
ª¤U%„
ÿÿ 44 ESC2 +i++ +-
D#U%„
ÿÿ 45 ESC3 +i++ +-
¶U-ò
ÿÿ 45 e_c a+i+e i+f- = 0|f
TFUQ
ÿÿ 93 ESC0 +e__i-+: P-+-c-+ = [V1.0] Ha_d+a_e = "WM320_ESC_V9" ºU1S
ÿÿ 93 L-ade = [V01.00.02.02] ÀåU3Â
ÿÿ 93 Fi++a_e = [V01.10.00.00]
¾€UQ
ÿÿ 93 ESC1 +e__i-+: P_-+-c-+ = [V1.0] Ha_d+a_e = "WM320_ESC_V9" YTU1S
ÿÿ 93 L-ade_ = [V01.00.02.02] ÀåU3Â
ÿÿ 93 Fi_++a_e = [V01.10.00.00]
¾€UQ
ÿÿ 94 ESC2 +e__i-+: P_-+-c-+ = [V1.0] Ha_d+a_e = "WM320_ESC_V9" YÒU1S
ÿÿ 94 L-ade_ = [V01.00.02.02] +U3Â
ÿÿ 94 Fi_++a_e = [V01.10.00.00]
ËUQ
ÿÿ 94 ESC3 +e__i-+: P_-+-c-+ = [V1.0] Ha_d+a_e = "WM320_ESC_V9" º•U1S
ÿÿ 94 L-ade_ = [V01.00.02.02] +U3Â
ÿÿ 94 Fi_++a_e = [V01.10.00.00]
ËU-ò
ÿÿ+gi+ba+ -i+ch 0, -++ 0, ya+ 0+-U4¬
ÿÿ 101 [FDI AHRS[1]]:ah___i+i+ begi+KÎU5h
ÿÿ 102 [FDI AHRS[1]]:bia fdi +++ -+UU5h
ÿÿ 102 [FDI AHRS[1]]:i+i+ fdi +++ -+Š-U:-
ÿÿ 102 [FDI AHRS[1]]:+ai+ f-_ e+-_ chec++ÙUHW
ÿÿ 111 [LED] cha+ged: +e+-e_a++_e +-+ _eady +he+ +a++-ûºU6=
ÿÿ 111 Ba++e_y ba_c-de:6171160823259
U4U<Ú
ÿÿdfi++e___c_i+-++-++, b+++e_+-_+h fi_+ -de_Õ-U7ù
ÿÿd --fc: 10.000000 hz, de+ay: 15.915494 +¢¶U=
ÿÿdfi++e___c_i+-++-i+ch, b+++e+-+h fi__+ -de_SU7ù
ÿÿd --fc: 10.000000 hz, de+ay: 15.915494 +¢¶U;´
ÿÿdfi++e___c_i+-++ya+, b+++e+-+h fi_+ -de_2ÀU7ù
ÿÿd --fc: 10.000000 hz, de+ay: 15.915494 +¢¶U@!
ÿÿdfi++e___c_i+-+++h-+++e, b+++e+-_+h fi__+ -de+IU7ù
ÿÿd --fc: 10.000000 hz, de+ay: 15.915494 +¢¶UEÞ
ÿÿ 155 -+d.IOC e_e+ i++e++ige+ce_UfJ
ÿÿ 155 [+a+ba++e_y]+hi fi_e+a_e ca+c g-h+e _-eed:7.800000 - +a+d _-eed:2.500000
%AU7ù
ÿÿ 155 CTRL _e_e+ a++ by c +-de +i+chæU=
ÿÿ 155 [C++<1>] REQ_RC_NORMAL ATTI c++a++ióU0—
ÿÿ 161 Ee--+ +i+e -ff_e+:1d0
'|U-ò
ÿÿ 183 [LED] cha+ged: +- a++iTJUD
ÿÿ 198 [FDI AHRS[1]]:(+|yz)+ai+ f- _+a+ic +he+ i+i+CU-ò
ÿÿ+gi+ba+ -i+ch 0, -++ 0, ya+ 0+-U:-
ÿÿ 228 Ba++e_y +a+e :ATL NVT DJ005
U2
ÿÿ 228 +a++fac++e Da+e:2016/3/3
ŸU-ò
ÿÿ 228 Se_ia+ +++be :354
0{UK
ÿÿ 235 c-+++e: 0 +i+e-++_c-+++e_0
chec+c-++__+a+e 0
ú*U>K
ÿÿ 235 g- i+i+: +ac+:0 ac+:18 fa+_e_f+ag:0
³øU-ò
from dji-firmware-tools.
notsolowki
commented on June 30, 2024
this is 57600
serial log - Click to expand
U4¬
ÿÿ 0 ee-_-+ +-ad 5 264 128 136‚U4¬
ÿÿ 0 ee-_-+ +-ad 6 400 12 16¯U4¬
ÿÿ 0 ee-_-+ +-ad 7 416 40 48·U4¬
ÿÿ 0 ee-_-+ +-ad 8 464 9 16(KU4¬
ÿÿ 0 ee-_-+ +-ad 9 480 1 8bõU4¬
ÿÿ 0 ee-_-+ +-ad 10 488 6 16ÐãU4¬
ÿÿ 0 ee-_-+ +-ad 11 504 4 8%ÝU4¬
ÿÿ 0 ee-_-+ +-ad 12 512 52 56¸]U4¬
ÿÿ 0 ee-_-+ +-ad 13 568 8 16Œ4¬
ÿÿ 0 ee-_-+ +-ad 14 584 7 16IMU4¬
ÿÿ 0 ee-_-+ +-ad 15 600 12 16ÜU4¬
ÿÿ 0 ee-_-+ +-ad 16 616 38 48æ¯U4¬
ÿÿ 0 ee-_-+ +-ad 17 664 12 16„äU4¬
ÿÿ 0 ee-_-+ +-ad 18 680 56 64<çU4¬
ÿÿ 0 ee-_-+ +-ad 19 744 32 40+U4¬
ìU4¬ ÿÿ 0 ee-_-+ +-ad 20 784 1 8
ÿÿ 0 ee-_-+ +-ad 21 792 16 240zU4¬
ÿÿ 0 ee-_-+ +-ad 22 816 16 24ÛýU4¬
ÿÿ 0 ee-_-+ +-ad 23 840 1 8R}U4¬
ÿÿ 0 ee-_-+ +-ad 24 848 1 8“U4¬
ÿÿ 0 ee-_-+ +-ad 25 856 10 16[U4¬
ÿÿ 0 ee-_-+ +-ad 26 872 36 40©U4¬
ÿÿ 0 ee-_-+ +-ad 27 912 52 56iU4¬
ÿÿ 0 ee-_-+ +-ad 28 968 44 48–éU4¬
ÿÿ 0 ee-_-+ +-ad 29 1016 28 32âJU4¬
ÿÿ 0 ee-_-+ +-ad 30 1048 18 24–¸U4¬
ÿÿ 0 ee-_-+ +-ad 31 1072 16 24(U4¬
ÿÿ 0 ee-_-+ +-ad 32 1096 72 80$KU4¬
ÿÿ 0 ee-_-+ +-ad 33 1176 24 32ýÀU4¬
ÿÿ 0 ee-_-+ +-ad 34 1208 64 723SU4¬
ÿÿ 0 ee-_-+ +-ad 35 1280 24 32U4¬
ÿÿ 0 ee-_-+ +-ad 36 1312 96 104û�U8á
ÿÿdfi++e_-a+g++a__+e+, b+++e_+-_+h 2+d -_de_çŸU7ù
ÿÿd --fc: 20.000000 hz, de+ay: 11.252254 +_!–UD
ÿÿdfi++e_-a+g++a__acc, +_ac+i+g diffe_e++ia+-_ 2+d -_de_î¿UK
ÿÿd --fc1: 15.000000 hz, fc2: 30.000000 hz, de+ay: 15.003007 +_ç+U7ù
ÿÿdfi++e_-+i+ea__acc, b+++e_+-_+h 2+d -_de_$U7ù
ÿÿd --fc: 15.000000 hz, de+ay: 15.003007 +_×½UŠ
ÿÿd+-+-_ i+i+ c-ef0TUI“
ÿÿd0 _-++:-0.707107 -i+ch:0.707107 ya+:1.000000 +if+:1.000000úUI“
ÿÿd1 _-++:0.707107 -i+ch:0.707107 yUK
ÿÿd3 _-++:-0.707107 -i+ch:-0.707107 ya+:-1.000000 +if+:1.000000IU/c
ÿÿdc_af+ c-+fig+_a+i-+ +-+-_ c-ef
›+UI“
ÿÿd0 _-++:-0.707107 -i+ch:0.707107 ya+:0.000000 +if+:1.000000d_UI“
ÿÿd1 _-++:0.707107 -i+ch:0.707107 ya+:-0.000000 +if+:1.000000î;UI“
ÿÿd2 _-++:0.707107 -i+ch:-0.707107 ya+:0.000000 +if+:1.000000{UK
ÿÿd3 _-++:-0.707107 -i+ch:-0.707107 ya+:-0.000000 +if+:1.000000€ŠUHW
ÿÿd4 _-++:0.000000 -i+ch:0.000000 ya+:0.000000 +if+:0.000000ÎUHW
ÿÿd5 _-++:0.00UI“
ÿÿd2 _-++:0.353553 -i+ch:-0.353553 ya+:0.000000 +if+:0.2500003JUK
ÿÿd3 _-++:-0.353553 -i+ch:-0.353553 ya+:-0.000000 +if+:0.250000¢ýUHW
ÿÿd4 _-++:0.000000 -i+ch:0.000000 ya+:0.000000 +if+:0.000000ÎUHW
ÿÿd5 _-++:0.000000 -i+ch:0.000000 ya+:0.000000 +if+:0.000000„ãUHW
ÿÿd6 _-++:0.000000 -i+ch:0.000000 ya+:0.000000 +if+:0.000000KôUHW
ÿÿd7 _-++:0.000000 -i+ch:0.000000 ya+:0.000000 +if+:0.000000UN
ÿÿdc_af+ +-de+ i+f-®ªU2
ÿÿdI|:0.005591 Iy:0.005591 Iz:0.011U5h
ÿÿ 0 +i_ ca+i 55 55 674d fff0 c++:0 ,U#.
ÿÿ 0 i++ _+a++_:0-U\€
ÿÿ 0 [ha_dfa+++]:******************chec+ fa+++ i+f- a+d +_ace ************ì¥U]D
ÿÿ 0 [ha_dfa+++]:-----fa+++ i_ ++++: add_(0|40024000),f+ag(0|00523b69)-----ŒÈU]D
ÿÿ 0 [ha_dfa+++]:-----fa+++ i_ ++++: add_(0|400241a0),f+ag(0|da2e493b)-----æÒUb-
ÿÿ 0 [ha_dfa+++]:-----+a_+ i+f- i_ ++++: add_(0|40024340),f+ag(0|cd8ed971)-----?¯Ucµ
ÿÿ 0 [ha_dfa+++]:-----+_ace i+f-Ucµ
ÿÿ 0 [ha_dfa+++]:-----+_ace i+f- i_ ++++: add_(0|40024790),f+ag(0|a3abfa90)-----ËùUe
ÿÿ 0 [ha_dfa+++]:-----+dg_+i+e_i+f- i_ ++++: add_(0|40024a50),f+ag(0|add18bec)-----¬U)É
ÿÿ 0 _+a_++-:3.977370
çcU&Ñ
ÿÿ 0 B-a_d:"++320+2"¯U)É
ÿÿ[> ai_--_+ +i+i+ i+i+ed [1]üšU.§
ÿÿ 1 ai_--_+ +i+i+ i+i+ed[1]/{U'
ÿÿ[[0][0][1][804][1][10086]¹
Uß
ÿÿ[>e+d -f db:[1]üòU0—
ÿÿ 1 c-+-a__ ca+ib_a+i-+ i+i+!8GU;´
ÿÿ 1 [LED] cha+ged: +e_+ +ed +he+ _+a_++-+UB°
ÿÿ 1 a-- c-++ec+ cha+ged:+a_+(255) != c+__e++(0)7ÅUHW
ÿÿ 1 a__i_+a++ c-++ec+ cha+ged:+a_+(255) != c+__e++(0)XRU8á
ÿÿdfi++e__+-+-__-++, b+++e_+-_+h fi__+ -_de_ŸCU7ù
ÿÿd --fc: 100.000000 hz, de+ay: 1.591549 +_ºªU2
ÿÿ 1 [FDI MAGN[1]] e+e++:++_+ -+œU2
ÿÿ 1 [FDI GYRO[1]] e+e++:++_+ -+˜U1S
ÿÿ 1 [FDI ACC[1]] e+e++:++_+ -+ó\U2
ÿÿ 1 [FDI BARO[1]] e+e++:++_+ -+¥�U,6
ÿÿ 1 [FDI AHRS[1]]:++_+ -+B�U0—
ÿÿ 1 [FDI CTRL] e+e++: ++_+ -+JãU?�
ÿÿ 1 +e+- ca+i (0.000000,0.000000) 0 f+:4 4
+øU`à
ÿÿ 1 +e+- ca+i 0 b+:0.000000 0.000000 0.000000 ba:0.000000 0.000000 0.000000
�+UF‹
ÿÿ 1 a-- +e+- ca+i (22.000000,65.000000) aa f+:6 6
'ÑUh–
ÿÿ 1 a-- +e+- ca+i aa b+:0.000212 -0.000181 0.000096 ba:-0.000084 0.000284 -0.002604
ÑJU]D
ÿÿ 4 [e_c_i___+a++] _+a++_ cha+ged: +a_+(0|ffffffff) != c+__e++(0|00000000)½eU]D
ÿÿ 4 [e_c_i__e+-+y] _+a++_ cha+ged: +a_+(0|ffffffff) != c+__e++(0|00000000)‡åU1S
ÿÿ 10 [FDI GPS[1]] e+e++:++_+ -+$ßU1S
ÿÿ 12 _ecei+ed -+/-ff 2 f_-+ a--¹àU@!
ÿÿ 12 CTRL _e_e+ a++ by APP.+i__i-+._e-+e_+.-ffHU*œ
ÿÿ 12 ac+ -+/-ff 0 +- a--�U1S
ÿÿ 17 _ecei+ed -+/-ff 2 f_-+ a--åU@!
ÿÿ 17 CTRL _e_e+ a++ by APP.+i__i-+._e-+e_+.-ff+ÙU*œ
ÿÿ 17 ac+ -+/-ff 0 +- a--†UN
ÿÿ+i+ez-+e _e+:-60GAU'
ÿÿ
-+e_y ha_h fai+ 6ad4c516|¼U%„
ÿÿ 47 ESC0 +i++ +-
îU%„
ÿÿ 48 ESC1 +i++ +-
îdU%„
ÿÿ 48 ESC2 +i++ +-
ãU%„
ÿÿ 49 ESC3 +i++ +-
Z+U-ò
ÿÿ 49 e_c a+i+e i+f- = 0|f
`+UQ
ÿÿ 97 ESC0 +e__i-+: P_-+-c-+ = [V1.0] Ha_d+a_e = "WM320_ESC_V9" [ÅU1S
ÿÿ 97 L-ade_ = [V01.00.02.02] 7U3Â
ÿÿ 97 Fi_++a_e = [V01.10.00.00]
]ŒUQ
ÿÿ 98 ESC1 +e__i-+: P_-+-c-+ = [V1.0] Ha_d+a_e = "WM320_ESC_V9" NiU1S
ÿÿ 98 L-ade_ = [V01.00.02.02] }U3Â
ÿÿ 98 Fi_++a_e = [V01.10.00.00]
5ÞUQ
ÿÿ 98 ESC2 +e__i-+: P_-+-c-+ = [V1.0] Ha_d+a_e = "WM320_ESC_V9" +¡U1S
ÿÿ 98 L-ade_ = [V01.00.02.02] }U3Â
ÿÿ 98 Fi_++a_e = [V01.10.00.00]
5ÞUQ
ÿÿ 99 ESC3 +e__i-+: P_-+-c-+ = [V1.0] Ha_d+a_e = "WM320_ESC_V9" 4‘U1S
ÿÿ 99 L-ade_ = [V01.00.02.02] LîU3Â
ÿÿ 99 Fi_++a_e = [V01.10.00.00]
4¬
ÿÿ 101 [FDI AHRS[1]]:ah___i+i+ begi+KÎU5h
ÿÿ 102 [FDI AHRS[1]]:bia_ fdi ++_+ -+UU5h
ÿÿ 102 [FDI AHRS[1]]:i+i+ fdi ++_+ -+Š-U:-
ÿÿ 102 [FDI AHRS[1]]:+ai+ f-_ _e+_-_ chec++ÙUHW
ÿÿ 111 [LED] cha+ged: +e+-e_a++_e +-+ _eady +he+ _+a_++-ûºU6=
ÿÿ 115 Ba++e_y ba_c-de:6171160823259
0{U@!
ÿÿ 127 a-- c-++ec+ cha+ged:+a_+(0) != c+__e++(1)MU<Ú
ÿÿdfi++e___c_i+-++__-++, b+++e_+-_+h fi__+ -_de_Õ-U7ù
ÿÿd --fc: 10.000000 hz, de+ay: 15.915494 +_¢¶U=
ÿÿdfi++e___c_i+-++_-i+ch, b+++e_+-_+h fi__+ -_de_SU7ù
ÿÿd --fc: 10.000000 hz, de+ay: 15.915494 +_¢¶U;´
ÿÿdfi++e___c_i+-++_ya+, b+++e_+-_+h fi__+ -_de_2ÀU7ù
ÿÿd --fc: 10.000000 hz, de+ay: 15.915494 +_¢¶U@!
ÿÿdfi++e___c_i+-++_+h_-+++e, b+++e_+-_+h fi__+ -_de_+IU7ù
ÿÿd --fc: 10.000000 hz, de+ay: 15.915494 +_¢¶UEÞ
ÿÿ 155 -+d.IOC _e_e+ i++e++ige+ce_-_ie++a+i-+_e+ab+ed7UEÞ
ÿÿ 155 [BATTERY]:_e_e+ defa+++ _+a_+ cfg - L1:1 L2:2Ï.UfJ
ÿÿ 155 [_+aU7ù
ÿÿ 155 CTRL _e_e+ a++ by _c +-de _+i+chæU=
ÿÿ 155 [C+_+<1>] REQ_RC_NORMAL ATTI c+_+_a++ióU0—
ÿÿ 161 Ee-_-+ +_i+e -ff_e+:1d0
'|U-ò
ÿÿ 183 [LED] cha+ged: +- a++iTJU-ò
ÿÿ+gi+ba+ -i+ch 0, _-++ 0, ya+ 0+-from dji-firmware-tools.
notsolowki
commented on June 30, 2024
could i look into the ubifs and check what the settings are for the console. or do you have any way to verify them?
from dji-firmware-tools.
mefistotelis
commented on June 30, 2024
Most upper case chars (codes 65-90) are OK. Same with numbers (48-57).
Lower case (97-122) - there are issues with k, l, n, o, r, t, u; but no problem with a, b, c, d, e, f, g, h, i, z.
if not the "z", I would say there are issues with ASCII codes above 106.
Example - string:
"[ha_dfa+++]:******************chec+ fa+++ i+f- a+d +ace ************"
Should be:
"[hardfault]:******************check fault info and trace *******"
Pleae note, these messages come from the flight controller, not from Ambarella. The flight controller doesn't use UBIFS.
from dji-firmware-tools.
notsolowki
commented on June 30, 2024
how did you do that. im using secureCrt. your very good observing the details.
from dji-firmware-tools.
notsolowki
commented on June 30, 2024
so i take it the flight controller has been disassembled?
from dji-firmware-tools.
mefistotelis
commented on June 30, 2024
You can disassemble it from P3X_FW_V01.07.0060_mi01.bin - the only unencrypted one. It can be converted to ELF by arm_bin2elf.py, then it's easy to open it with IDA Pro.
from dji-firmware-tools.
notsolowki
commented on June 30, 2024
this is what i get from putty U0▒
▒▒tgimbal pitch 0, roll 0, yaw -179▒▒U0▒
▒▒tgimbal pitch 0, roll 0, yaw -179▒▒U0▒
▒▒tgimbal pitch 0, roll 0, yaw -179▒▒U0▒
▒▒tgimbal pitch 0, roll 0, yaw -179▒▒U0▒
▒▒tgimbal pitch 0, roll 0, yaw -179▒▒U0▒
▒▒tgimbal pitch 0, roll 0, yaw -179▒▒U0▒
▒▒tgimbal pitch 0, roll 0, yaw -179▒▒U0▒
▒▒tgimbal pitch 0, roll 0, yaw -179▒▒U0▒
▒▒tgimbal pitch 0, roll 0, yaw -179▒▒U0▒
▒▒tgimbal pitch 0, roll 0, yaw -179▒▒U0▒
▒▒tgimbal pitch 0, roll 0, yaw -179▒▒U0▒
▒▒tgimbal pitch 0, roll 0, yaw -179▒▒U0▒
from dji-firmware-tools.
notsolowki
commented on June 30, 2024
serial log - Click to expand
▒ 0 eeprom load 5 264 128 136▒U4▒
▒ 0 eeprom load 6 400 12 16▒U4▒
▒ 0 eeprom load 7 416 40 48▒U4▒
▒ 0 eeprom load 8 464 9 16(KU4▒
▒ 0 eeprom load 9 480 1 8b▒U4▒
▒ 0 eeprom load 10 488 6 16▒▒U4▒
▒ 0 eeprom load 11 504 4 8%▒U4▒
▒ 0 eeprom load 12 512 52 56▒]U4▒
▒ 0 eeprom load 13 568 8 16▒4▒
▒ 0 eeprom load 14 584 7 16IMU4▒
▒ 0 eeprom load 15 600 12 16▒U4▒
▒ 0 eeprom load 16 616 38 48▒U4▒
▒ 0 eeprom load 17 664 12 16▒▒U4▒
▒ 0 eeprom load 18 680 56 64<▒U4▒
▒ 0 eeprom load 19 744 32 40lU4▒
▒▒U4▒ 0 eeprom load 20 784 1 8
▒ 0 eeprom load 21 792 16 240zU4▒
▒ 0 eeprom load 22 816 16 24▒▒U4▒
▒ 0 eeprom load 23 840 1 8R}U4▒
▒ 0 eeprom load 24 848 1 8▒U4▒
▒ 0 eeprom load 25 856 10 16[U4▒
▒ 0 eeprom load 26 872 36 40▒U4▒
▒ 0 eeprom load 27 912 52 56iU4▒
▒ 0 eeprom load 28 968 44 48▒▒U4▒
▒ 0 eeprom load 29 1016 28 32▒JU4▒
▒ 0 eeprom load 30 1048 18 24▒▒U4▒
▒ 0 eeprom load 31 1072 16 24(U4▒
▒ 0 eeprom load 32 1096 72 80$KU4▒
▒ 0 eeprom load 33 1176 24 32▒▒U4▒
▒ 0 eeprom load 34 1208 64 723SU4▒
▒ 0 eeprom load 35 1280 24 32U4▒
▒ 0 eeprom load 36 1312 96 104▒U8▒
▒▒dfitler-angular_vel, butterworth 2nd order▒U7▒
▒▒d --fc: 20.000000 hz, delay: 11.252254 ms!▒UD
▒▒dfitler-angular_acc, tracking differentiator 2nd order▒UK
▒▒d --fc1: 15.000000 hz, fc2: 30.000000 hz, delay: 15.003007 ms▒lU7▒
▒▒dfitler-linear_acc, butterworth 2nd order$U7▒
▒▒d --fc: 15.000000 hz, delay: 15.003007 msU▒
▒▒dmotor init coef0TUI▒
▒▒d0 roll:-0.707107 pitch:0.707107 yaw:1.000000 lift:1.000000▒▒UI▒
▒▒d1 roll:0.707107 pitch:0.707107 yaw:-1.000000 lift:1.000000'▒UI▒
▒▒d2 roll:0.707107 pitch:-0.707107 yaw:1.000000 lift:1.000000▒▒UK
▒▒d3 roll:-0.707107 pitch:-0.707107 yaw:-1.000000 lift:1.000000IU/c
▒▒dcraft configuration motor coef
▒kUI▒
▒▒d0 roll:-0.707107 pitch:0.707107 yaw:0.000000 lift:1.000000dsUI▒
▒▒d1 roll:0.707107 pitch:0.707107 yaw:-0.000000 lift:1.000000▒;UI▒
▒▒d2 roll:0.707UHW
▒▒d6 roll:0.000000 pitch:0.000000 yaw:0.000000 lift:0.000000K▒UHW
▒▒d7 roll:0.000000 pitch:0.000000 yaw:0.000000 lift:0.000000U.▒
▒▒dcraft configuration ccpm coef
▒QUI▒
▒▒d0 roll:-0.353553 pitch:0.353553 yaw:0.000000 lift:0.250000▒OUI▒
▒▒d1 roll:0.353553 pitch:0.353553 yaw:-0.000000 lift:0.250000▒CUI▒
▒▒d2 roll:0.353553 pitch:-0.353553 yaw:0.000000 lift:0.2500003JUK
▒▒d3 roll:-0.353553 pitch:-0.353553 yaw:-0.000000 lift:0.250000▒▒UHW
▒▒d4 roll:0.000000U*▒
▒▒iw: 0.000000, lift: 0.000000w▒U,6
▒▒iw: 198.975159, lift: 0.356320▒cU,6
▒▒iw: 385.479095, lift: 1.337347n{U,6
▒▒iw: 561.598694, lift: 2.838538▒▒U,6
▒▒iw: 728.896790, lift: 4.7816159GU,6
▒▒iw: 888.579285, lift: 7.106159▒▒U5h
▒ 0 mis cali 55 55 674d fff0 cnt:0 ,U#.
▒ 0 imu status:0-U\▒
▒ 0 [hardfault]:******************check fault info and trace ************▒U]D
▒ 0 [hardfault]:-----fault is null: addr(0x40024000),U]D
▒ 0 [hardfault]:-----fault is null: addr(0x400241a0),flag(0xda2e4bbb)-----▒Ubq
▒ 0 [hardfault]:-----task info is null: addr(0x40024340),flag(0xcc8ad971)-----▒▒Uc▒
▒ 0 [hardfault]:-----trace info is null: addr(0x400244d0),flag(0x1ae04489)-----▒)UX▒
▒ 0 [hardfault]:******************check last trace ******************g▒Uc▒
▒ 0 [hardfault]:-----trace info is null: addr(0x40U)▒
▒▒[> airport limit inited [1]▒U.▒
▒ 1 airport limit inited[1]/{U'
▒▒[[0][0][1][804][1][10086]▒
U▒
▒▒[>end of db:[1]▒▒U0▒
▒ 1 compass calibration init!8GU;▒
▒ 1 [LED] changed: test led when startupuUB▒
▒ 1 app connect changed:last(255) != current(0)7▒UHW
▒ 1 assistant connect changed:last(255) != current(0)XRU8▒
▒▒dfilter_motor_pwm, butterworth first order▒CU7▒
▒▒d --fc: 100.000000 hz, delay: 1.591549 ms▒▒U2
▒ 1 [FDI MAGN[1]] event:turn on▒U2
▒ 1 [FDI GYRO[1]] event:turn on▒▒U1S
▒ 1 [FDI ACC[1]] event:turn on▒\U2
▒ 1 [FDI BARO[1]] event:turn on▒▒U,6
▒ 1 [FDI AHRS[1]]:turn onB▒U0▒
▒ 1 [FDI CTRL] event: turn onJ▒U?▒
▒ 1 temp cali (0.000000,0.000000) 0 fw:4 4
n▒U`▒
▒ 1 temp cali 0 bw:0.000000 0.000000 0.000000 ba:0.000000 0.000000 0.000000
▒tUF▒
▒ 1 app temp cali (22.000000,65.000000) aa fw:6 6
'▒Uh▒
▒ 1 app temp cali aa bw:0.000212 -0.000181 0.000096 ba:-0.000084 0.000284 -0.002604
▒JU@!
▒ 2 app connect changed:last(0) != current(1)O▒U]D
▒ 4 [esc_is_stall] status changed: last(0xffffffff) != current(0x00000000)▒eU]D
▒ 4 [esc_is_empty] status changed: last(0xffffffff) != current(0x00000000)▒▒U1S
▒ 10 [FDI GPS[1]] event:turn on$▒U1S
▒ 16 received on/off 2 from appNU@!
▒ 16 CTRL reset all by APP.mission.request.off-YU*▒
▒ 16 ack on/off 0 to appۭU'
▒▒
query hash fail 6ad4c516|▒UN
▒▒timezone set:-60GAU1S
▒ 21 received on/off 2 from app▒U@!
▒ 21 CTRL reset all by APP.mission.request.off▒▒U*▒
▒ 21 ack on/off 0 to app1yU%▒
▒ 34 ESC0 link up
h▒U%▒
▒ 35 ESC1 link up
2NU%▒
▒ 35 ESC2 link up
▒▒U%▒
▒ 36 ESC3 link up
▒|U-▒
from dji-firmware-tools.
notsolowki
commented on June 30, 2024
serial log - Click to expand
▒ 0 [hardfault]:-----task info: addr(0x40024340),flag(0xabcdef02)-----fJ ▒ 0 [hardfault]:tick_stamp(83596),timebase_stamp(0x00000002bb5f9b97), taskUK ▒ 0 [hardfault]:StkPtr(0x2002bdac),TaskState(0x00000000)▒▒U^ ▒ 0 [hardfault]:r4(0x080349a6),r5(0x01000000),r6(0x449f7429),r7(0x448a8b09)▒▒U`▒ ▒ 0 [hardfault]:r8(0x406bfaef),r9(0x49cb7355),r10(0x00000000),r11(0x00000000)VKUD ▒ 0 [hardfault]:r3_lr(0x080349a7),psp(0x2002be48)▒HUM▒ ▒ 0 [hardfault]:----------task "task_c" tcb_info----------▒{UO9 ▒ 0 [hardfault]:StkBasePtr(0x2002d708),StkEndPtr(0x2002df08)▒UK ▒ 0 [hUO9 ▒ 0 [hardfault]:StkBasePtr(0x2002df08),StkEndPtr(0x2002e308)1&UK ▒ 0 [hardfault]:StkPtr(0x2002e20c),TaskState(0x00000000)&▒U^ ▒ 0 [hardfault]:r4(0x080349a6),r5(0x01000000),r6(0x00000000),r7(0x3ea216f0)▒U`▒ ▒ 0 [hardfault]:r8(0x3a0a5103),r9(0x413e79e8),r10(0x00000000),r11(0x00000000) ▒UD ▒ 0 [hardfault]:r3_lr(0x080349a7),psp(0x2002e2a8)▒UM▒ ▒ 0 [hardfault]:----------task "task_a" tcb_info----------H!UO9 ▒ 0 [hU_▒ ▒ 0 [hardfault]:-----irq_trace is null,addr(0x400244d0),flg(0x00000000)-----▒▒Uj ▒ 0 [hardfault]:----------task_trace is null,addr(0x400244d0),flg(0x00000000)----------5UX▒ ▒ 0 [hardfault]:******************check last trace ******************g▒U_▒ ▒ 0 [hardfault]:-----irq_trace is null,addr(0x40024790),flg(0x00000000)-----u▒Uj ▒ 0 [hardfault]:----------task_trace is null,addr(0x40024790),flg(0x00000000)----------▒▒U]D ▒ 0 [U*▒ ▒ 0 startup:11.647679 g▒U&▒ ▒ 0 Board:"wm320v2"▒U)▒ ▒▒[> airport limit inited [1]▒U.▒ ▒ 1 airport limit inited[1]/{U' ▒▒[[0][0][1][804][1][10086]▒ U▒ ▒▒[>end of db:[1]▒▒U0▒ ▒ 1 compass calibration init!8GU;▒ ▒ 1 [LED] changed: test led when startupuUB▒ ▒ 1 app connect changed:last(255) != current(0)7▒UHW ▒ 1 assistant connect changed:last(255) != current(0)XRU8▒ ▒▒dfilter_motor_pwm, butterworth first order▒CU7▒ ▒▒d --fc: 100.000000 hz, delay: 1.591549 ms▒▒U2 ▒ 1 [FDI MAGN[1]] event:turn on▒U2 ▒ 1 [FDI GYRO[1]] event:turn on▒▒U1S ▒ 1 [FDI ACC[1]] event:turn on▒\U2 ▒ 1 [FDI BARO[1]] event:turn on▒▒U,6 ▒ 1 [FDI AHRS[1]]:turn onB▒U0▒ ▒ 1 [FDI CTRL] event: turn onJ▒U?▒ ▒ 1 temp cali (0.000000,0.000000) 0 fw:4 4 n▒U`▒ ▒ 1 temp cali 0 bw:0.000000 0.000000 0.000000 ba:0.000000 0.000000 0.000000 ▒tUF▒ ▒ 1 app temp cali (22.000000,65.000000) aa fw:6 6 '▒Uh▒ ▒ 1 app temp cali aa bw:0.000212 -0.000181 0.000096 ba:-0.000084 0.000284 -0.002604 ▒JU%▒ ▒ 1 ESC0 link up ▒|U5h ▒ 2 [Err] OFDM_TX State:0x00000004y▒U%▒ ▒ 2 ESC1 link up ▒▒U5h ▒ 3 [Err] OFDM_TX State:0x00000000z▒U%▒ ▒ 3 ESC2 link up I^U%▒ ▒ 3 ESC3 link up ▒U-▒ ▒ 3 esc alive info = 0xf ▒▒U6= ▒ 4 Battery barcode:6171160823259 Q▒U]D ▒ 4 [esc_is_stall] status changed: last(0xffffffff) != current(0x00000000)▒eU]D ▒ 4 [esc_is_empty] status changed: last(0xffffffff) != current(0x00000000)▒▒UQ ▒ 4 ESC0 version: Protocol = [V1.0] Hardware = "WM320_ESC_V9" ▒U1S ▒ 4 Loader = [V01.00.02.02] *U3▒ ▒ 4 Firmware = [V01.10.00.00] QUQ ▒ 5 ESC1 version: Protocol = [V1.0] Hardware = "WM320_ESC_V9" ▒7U1S ▒ 5 Loader = [V01.00.02.02] ,▒U3▒ ▒ 5 Firmware = [V01.10.00.00] 2▒UQ ▒ 5 ESC2 version: Protocol = [V1.0] Hardware = "WM320_ESC_V9" ▒▒U1S ▒ 5 Loader = [V01.00.02.02] ,▒U3▒ ▒ 5 Firmware = [V01.10.00.00] 2▒UQ ▒ 6 ESC3 version: Protocol = [V1.0] Hardware = "WM320_ESC_V9" ▒ U1S ▒ 6 Loader = [V01.00.02.02] n▒U3▒ ▒ 6 Firmware = [V01.10.00.00] ▒U1S ▒ 10 [FDI GPS[1]] event:turn on$▒U1S ▒ 12 received on/off 2 from app▒▒U@! ▒ 12 CTRL reset all by APP.mission.request.offHU*▒ ▒ 12 ack on/off 0 to app▒U1S ▒ 16 received on/off 2 from appNU@! ▒ 16 CTRL reset all by APP.mission.request.off-YU*▒ ▒ 16 ack on/off 0 to appۭU-▒ ▒▒tgimbal pitch 0, roll 0, yaw 0loU4▒ ▒ 101 [FDI AHRS[1]]:ahrs_init beginK▒U5h ▒ 102 [FDI AHRS[1]]:bias fdi turn onUU5h ▒ 102 [FDI AHRS[1]]:init fdi turn on▒-U:p ▒ 102 [FDI AHRS[1]]:wait for sensor checkv▒UHW ▒ 111 [LED] changed: temperature not ready when startup▒U:p ▒ 121 Battery name :ATL NVT DJ005 ▒▒U2 ▒ 121 manufacture Date:2016/3/3 ▒)U-▒ ▒ 121 Serial number :354 K▒U-▒ ▒▒tgimbal pitch 0, roll 0, yaw 0loU<▒ ▒▒dfilter_rc_input_roll, butterworth first order▒-U7▒ ▒▒d --fc: 10.000000 hz, delay: 15.915494 ms▒▒U= ▒▒dfilter_rc_input_pitch, butterworth first orderSU7▒ ▒▒d --fc: 10.000000 hz, delay: 15.915494 ms▒▒U;▒ ▒▒dfilter_rc_input_yaw, butterworth first order2▒U7▒ ▒▒d --fc: 10.000000 hz, delay: 15.915494 ms▒▒U@! ▒▒dfilter_rc_input_throttle, butterworth first ordervIU7▒ ▒▒d --fc: 10.000000 hz, delay: 15.915494 ms▒▒UE▒ ▒ 155 old.IOC reset intelligence_orientation_enabled7UE▒ ▒ 155 [BATTERY]:reset default smart cfg - L1:1 L2:2▒.UfJ ▒ 155 [smart_battery]this fireware calc gohme speed:7.800000 - land speed:2.500000 %AU7▒ ▒ 155 CTRL reset all by rc mode switch▒U= ▒ 155 [Ctrl<1>] REQ_RC_NORMAL ATTI ctrl_atti▒U0▒ ▒ 162 Eeprom write offset:1d0 &U-▒ ▒ 183 [LED] changed: no attiTJUK ▒ 190 counter: 0 timeout_counter0 check_comm_state 1 WU>K ▒ 190 gps init: nack:0 ack:18 false_flag:0 ▒▒U-▒ ▒▒tgimbal pitch 0, roll 0, yaw 0loU-▒from dji-firmware-tools.
notsolowki
commented on June 30, 2024
what do i do about error importing elftools
from dji-firmware-tools.
mefistotelis
commented on June 30, 2024
Looks like text messages are wrapped into some some kind of binary container which starts with "U".
They are still readable, but it seem likely that since output is binary, the input also needs a specific binary format to be accepted (assuming that there is support for input).
elftools - the error message should explain what to do.
from dji-firmware-tools.
notsolowki
commented on June 30, 2024
i assume im looking at it right but i still have no idea how to disassemble somthing like this. i wouldnt mind the flight data usb port being turned into a serial port to the flight controller. have you tried anything like this.
.text:0802149A ; --------------------------------------------------------------------------- .text:0802149C dword_802149C DCD 0x2001C4C8 ; DATA XREF: sub_8021122+E6�r .text:0802149C ; sub_80212BE+26�r ... .text:080214A0 aIst8303D0xXIdE DCB "IST8303[%d:0x%x]:ID error %x[exp=%x or %x]",0 .text:080214A0 ; DATA XREF: sub_8021122:loc_802121E�o .text:080214CB DCB 0 .text:080214CC aIst8303D0xXCom DCB "IST8303[%d:0x%x]:compass_type = COMPASS_IST8303",0 .text:080214CC ; DATA XREF: sub_8021122+10E�o .text:080214FC aIst8303D0xXC_0 DCB "IST8303[%d:0x%x]:compass_type = COMPASS_IST8310",0 .text:080214FC ; DATA XREF: sub_8021122+11A�o .text:0802152C aIst8303D0xXS_2 DCB "IST8303[%d:0x%x]:set mode step 1 failed",0 .text:0802152C ; DATA XREF: sub_8021246+20�o .text:08021554 aIst8303D0xXS_3 DCB "IST8303[%d:0x%x]:set mode step 1 ok",0 .text:08021554 ; DATA XREF: sub_8021246:loc_802126A�o .text:08021578 aIst8303D0xXS_4 DCB "IST8303[%d:0x%x]:set mode step 2 failed",0 .text:08021578 ; DATA XREF: sub_8021246+42�o .text:080215A0 aIst8303D0xXS_5 DCB "IST8303[%d:0x%x]:set mode step 2 ok",0 .text:080215A0 ; DATA XREF: sub_8021246:loc_802128C�o .text:080215C5 DCB 0, 0, 0 .text:080215C8 aIst8303D0xXSet DCB "IST8303[%d:0x%x]:set mode step 3 failed",0 .text:080215C8 ; DATA XREF: sub_8021246+64�o .text:080215F1 DCB 0, 0, 0 .text:080215F4 aIst8303D0xXS_0 DCB "IST8303[%d:0x%x]:set mode step 3 ok",0
from dji-firmware-tools.
notsolowki
commented on June 30, 2024
What is it gona take. i think my overall goal is to make this thing faster
from dji-firmware-tools.
notsolowki
commented on June 30, 2024
i see from the flight controller the speed settings are just numeric values .
from dji-firmware-tools.
mefistotelis
commented on June 30, 2024
This no longer seem related to serial port.
For reference - could you describe what you did to achieve the serial transmission in PuTTY?
from dji-firmware-tools.
notsolowki
commented on June 30, 2024
in putty i just used 8n1 no flow control and 115200. putty had encoding set to utf8 somthing i couldnt change with securecrt.
from dji-firmware-tools.
notsolowki
commented on June 30, 2024
i still want to enable the serial connection i just dont know where to start. can the components be communicated with through the gimbal. or do you have a know way to communicate with the flight controller through the usb on the front.
from dji-firmware-tools.
notsolowki
commented on June 30, 2024
id like to add that i notice the drone dont even start booting untill i open the console connection, it sits there and the gimbal makes some noises and then when i hit enter to start the connection the noise stop and it start with all the booting process???!?!?
from dji-firmware-tools.
notsolowki
commented on June 30, 2024
not sure what to make of this. this is digdat0s log
serial log - Click to expand
U;▒
▒ 0 [BAT]read barcode data success num:1▒rU<▒
▒ 0 [BAT]read begin:12211232 end:12345678▒xU4▒
▒U4▒
▒ 0 eeprom load 0 0 22 32;XU4▒
▒ 0 eeprom load 1 32 28 32▒▒U4▒
▒ 0 eeprom load 2 64 34 40▒\U4▒
▒ 0 eeprom load 3 104 20 24▒U4▒
▒ 0 eeprom load 4 128 132 136▒`U4▒
▒ 0 eeprom load 5 264 128 136▒U4▒
▒ 0 eeprom load 6 400 12 16▒U4▒
▒ 0 eeprom load 7 416 40 48▒U4▒
▒ 0 eeprom load 8 464 9 16(KU4▒
▒ 0 eeprom load 9 480 1 8b▒U4▒
▒ 0 eeprom load 10 488 6 16▒▒U4▒
▒ 0 eeprom load 11 504 4 8%▒U4▒
▒ 0 eeprom load 12 512 52 56▒]U4▒
▒ 0 eeprom load 13 568 8 16▒4▒
▒ 0 eeprom load 14 584 7 16IMU4▒
▒ 0 eeprom load 15 600 12 16▒U4▒
▒ 0 eeprom load 16 616 38 48▒U4▒
▒ 0 eeprom load 17 664 12 16▒▒U4▒
▒ 0 eeprom load 18 680 56 64<▒U4▒
▒ 0 eeprom load 19 744 32 40lU4▒
▒▒U4▒ 0 eeprom load 20 784 1 8
▒ 0 eeprom load 21 792 16 240zU4▒
▒ 0 eeprom load 22 816 16 24▒▒U4▒
▒ 0 eeprom load 23 840 1 8R}U4▒
▒ 0 eeprom load 24 848 1 8▒U4▒
▒ 0 eeprom load 25 856 10 16[U4▒
▒ 0 eeprom load 26 872 36 40▒U4▒
▒ 0 eeprom load 27 912 52 56iU4▒
▒ 0 eeprom load 28 968 44 48▒▒U4▒
▒ 0 eeprom load 29 1016 28 32▒JU4▒
▒ 0 eeprom load 30 1048 18 24▒▒U4▒
▒ 0 eeprom load 31 1072 16 24(U4▒
▒ 0 eeprom load 32 1096 72 80$KU4▒
▒ 0 eeprom load 33 1176 24 32▒▒U4▒
▒ 0 eeprom load 34 1208 64 723SU4▒
▒ 0 eeprom load 35 1280 24 32U4▒
▒ 0 eeprom load 36 1312 96 104▒U8▒
▒▒dfitler-angular_vel, butterworth 2nd order▒U7▒
▒▒d --fc: 20.000000 hz, delay: 11.252254 ms!▒UD
▒▒dfitler-angular_acc, tracking differentiator 2nd order▒UK
▒▒d --fc1: 15.000000 hz, fc2: 30.000000 hz, delay: 15.003007 ms▒lU7▒
▒▒dfitler-linear_acc, butterworth 2nd order$U7▒
▒▒d --fc: 15.000000 hz, delay: 15.003007 msU▒
▒▒dmotor init coef0TUI▒
▒▒d0 roll:-0.707107 pitch:0.707107 yaw:1.000000 lift:1.000000▒▒UI▒
▒▒d1 roll:0.707107 pitch:0.707107 yUI▒
▒▒d2 roll:0.707107 pitch:-0.707107 yaw:1.000000 lift:1.000000▒▒UK
▒▒d3 roll:-0.707107 pitch:-0.707107 yaw:-1.000000 lift:1.000000IU/c
▒▒dcraft configuration motor coef
▒kUI▒
▒▒d0 roll:-0.707107 pitch:0.707107 yaw:0.000000 lift:1.000000dsUI▒
▒▒d1 roll:0.707107 pitch:0.707107 yaw:-0.000000 lift:1.000000▒;UI▒
▒▒d2 roll:0.707107 pitch:-0.707107 yaw:0.000000 lift:1.000000{UK
▒▒d3 roll:-0.707107 pitch:-0.707107 yaw:-0.000000 lift:1.000000▒▒UHW
▒▒d4 roll:0.0UI▒
▒▒d0 roll:-0.353553 pitch:0.353553 yaw:0.000000 lift:0.250000▒OUI▒
▒▒d1 roll:0.353553 pitch:0.353553 yaw:-0.000000 lift:0.250000▒CUI▒
▒▒d2 roll:0.353553 pitch:-0.353553 yaw:0.000000 lift:0.2500003JUK
▒▒d3 roll:-0.353553 pitch:-0.353553 yaw:-0.000000 lift:0.250000▒▒UHW
▒▒d4 roll:0.000000 pitch:0.000000 yaw:0.000000 lift:0.000000▒UHW
▒▒d5 roll:0.000000 pitch:0.000000 yaw:0.000000 lift:0.000000▒▒UHW
▒▒d6 roll:0.000000 pitch:0.000000 yaw:0.000000 lift:0.000000K▒UU,6
▒▒iw: 888.579285, lift: 7.106159▒▒U5h
▒ 0 mis cali 55 55 6503 fff0 cnt:0&nU#.
▒ 0 imu status:0-U\▒
▒ 0 [hardfault]:******************check fault info and trace ************▒U]D
▒ 0 [hardfault]:-----fault is null: addr(0x40024000),flag(0x068b299b)-----~U]D
▒ 0 [hardfault]:-----fault is null: addr(0x400241a0),flag(0xeafdb304)-----ýUbq
▒ 0 [hardfault]:-----task info is null: addr(0x40024340),flag(0xbdca5cf7)-----Y▒Uc▒
▒ 0 [hardfault]:-----trace info is null: addr(0x400244d0),flag(0xb8216e58)-----D▒UX▒
▒ 0 [hardfault]:******************check last trace ******************g▒Uc▒
▒ 0 [hardfault]:-----trace info is null: addr(0x40024790),flag(0xd5920292)-----|tUe
▒ 0 [hardfault]:-----wdg_time_info is null: addr(0x40024a50),flag(0xd9f13db8)-----▒▒U)▒
▒ 0 startup:4.350412
y▒U&▒
▒ 0 Board:"wm320v2"▒U&▒
▒▒[> invalid flash key![0]
U0▒
▒ 1 compass calibration init!8GU;▒
▒ 1 [LED] changed: test led when startupuUB▒
▒ 1 app connect changed:last(255) != current(0)7▒UHW
▒ 1 assistant connect changed:last(255) != current(0)XRU8▒
▒▒dfilter_motor_pwm, butterworth first order▒CU7▒
▒▒d --fc: 100.000000 hz, delay: 1.591549 ms▒▒U2
▒ 1 [FDI MAGN[1]] event:turn on▒U2
▒ 1 [FDI GYRO[1]] event:turn on▒▒U1S
▒ 1 [FDI ACC[1]] event:turn on▒\U2
▒ 1 [FDI BARO[1]] event:turn on▒▒U,6
▒ 1 [FDI AHRS[1]]:turn onB▒U0▒
▒ 1 [FDI CTRL] event: turn onJ▒U?▒
▒ 1 temp cali (0.000000,0.000000) 0 fw:4 4
n▒U`▒
▒ 1 temp cali 0 bw:0.000000 0.000000 0.000000 ba:0.000000 0.000000 0.000000
▒tUF▒
▒ 1 app temp cali (29.000000,65.000000) aa fw:6 6
▒▒Ug▒
▒ 1 app temp cali aa bw:-0.000438 0.000095 -0.000076 ba:0.000068 0.000199 0.000468
▒U]D
▒ 4 [esc_is_stall] status changed: last(0xffffffff) != current(0x00000000)▒eU]D
▒ 4 [esc_is_empty] status changed: last(0xffffffff) != current(0x00000000)▒▒U1S
▒ 10 [FDI GPS[1]] event:turn on$▒U%▒
▒ 28 ESC0 link up
▒▒U%▒
▒ 29 ESC1 link up
▒vU%▒
▒ 29 ESC2 link up
▒U%▒
▒ 30 ESC3 link up
▒U-▒
▒ 30 esc alive info = 0xf
Q!UQ
▒ 78 ESC0 version: Protocol = [V1.0] Hardware = "WM320_ESC_V9" o▒U1S
▒ 78 Loader = [V01.00.02.02] ▒▒U3▒
▒ 78 Firmware = [V01.10.00.00]
KFUQ
▒ 78 ESC1 version: Protocol = [V1.0] Hardware = "WM320_ESC_V9" ▒▒U1S
▒ 78 Loader = [V01.00.02.02] ▒▒U3▒
▒ 78 Firmware = [V01.10.00.00]
KFUQ
▒ 79 ESC2 version: Protocol = [V1.0] Hardware = "WM320_ESC_V9" ;U1S
▒ 79 Loader = [V01.00.02.02] ▒#U3▒
▒ 79 Firmware = [V01.10.00.00]
▒UQ
▒ 79 ESC3 version: Protocol = [V1.0] Hardware = "WM320_ESC_V9" ▒|U1S
▒ 79 Loader = [V01.00.02.02] ▒#U3▒
▒ 79 Firmware = [V01.10.00.00]
▒U4▒
▒ 96 Battery barcode:6171153826167,▒U4▒
▒ 97 Battery barcode:6171153826167N▒U4▒
▒ 98 Battery barcode:6171153826167RkU4▒
▒ 101 [FDI AHRS[1]]:ahrs_init beginK▒U5h
▒ 102 [FDI AHRS[1]]:bias fdi turn onUU5h
▒ 102 [FDI AHRS[1]]:init fdi turn on▒-U:p
▒ 102 [FDI AHRS[1]]:wait for sensor checkv▒UHW
▒ 111 [LED] changed: temperature not ready when startup▒U5h
▒ 116 [Err] OFDM_TX State:0x00000008▒▒U:p
▒ 120 Battery name :ATL NVT DJ005
UsU2
▒ 120 manufacture Date:2015/9/6
▒▒U.▒
▒ 120 Serial number :1369
U<▒
▒▒dfilter_rc_input_roll, butterworth first order▒-U7▒
▒▒d --fc: 10.000000 hz, delay: 15.915494 ms▒▒U=
▒▒dfilter_rc_input_pitch, butterworth first orderSU7▒
▒▒d --fc: 10.000000 hz, delay: 15.915494 ms▒▒U;▒
▒▒dfilter_rc_input_yaw, butterworth first order2▒U7▒
▒▒d --fc: 10.000000 hz, delay: 15.915494 ms▒▒U@!
▒▒dfilter_rc_input_throttle, butterworth first ordervIU7▒
▒▒d --fc: 10.000000 hz, delay: 15.915494 ms▒▒UE▒
▒ 155 old.IOC reset intelligence_U7▒
▒ 155 CTRL reset all by rc mode switch▒U=
▒ 155 [Ctrl<1>] REQ_RC_NORMAL ATTI ctrl_atti▒U0▒
▒ 161 Eeprom write offset:1d0
'|U-▒
▒ 183 [LED] changed: no attiTJU;▒
▒ 198 [FDI AHRS[1]]:(mxyz)compass stuck!!!A▒UK
▒ 230 counter: 0 timeout_counter0
check_comm_state 0
▒▒U>K
▒ 230 gps init: nack:0 ack:18 false_flag:0from dji-firmware-tools.
notsolowki
commented on June 30, 2024
from dji-firmware-tools.
mefistotelis
commented on June 30, 2024
Regarding the log:
> invalid flash key![0]
This is harmless. I do not know what the flash key is, but when it's invalid, "airport limit" is disabled - so this seem to just inform that NFZ control is off. Might be interesting for some people, but not the reason of the drone not working.
▒ 116 [Err] OFDM_TX State:0x00000008▒▒U:p
This looks like the reason of the failure.
from dji-firmware-tools.
coptersafe
commented on June 30, 2024
not sure what to make of this. this is digdat0s log
serial log - Click to expand
last four symbols is a CRC , just del them
also for clear output use DJI PC Simulator
from dji-firmware-tools.
Related Issues (20)
- What happens if you only update the drone firmware
- DFT
- Phantom 4 batteries after years of not being used
- Getting Error Logs from Mavic Air 2 HOT 7
- Mini 2 flight controller firmware
- trying to clear error 10016 on Air2 S HOT 5
- dji mini 4 pro decode with dji_imah_fwsig
- Mavic 3 battery can not unseal by dji battery killer v0.5
- DJI Smart Controller RM500 battery - can't unseal
- Mavic Air 2 Issue HOT 1
- DJI Air 3 HOT 4
- mini 3 WM162 Main Processing Board motor driver looks like MP6543
- Gimbal calibration - DJI mini 2 SE HOT 1
- Mini 3 Battery BQ9003 Unseal Key
- Dji mini 4 pro 1D020001 error HOT 3
- Price is right Mini 3 pro. Error code 1112 HOT 1
- Can you please guide me to how I can download the DJI Battery Killer? I have a Phantom 2 Pro with 4 brand new batteries that sat too long, any help would be incredible and greatly apprecited!
- Dji Air 3 or Mavic 3
- Mavic Air 2 with errors 40021 and 10017 after camera replacement HOT 3
- Retrieve mini 3 pro firmware
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from dji-firmware-tools.