uuu 1.2.135 FBK usblib Bulk(R):LIBUSB_ERROR_PIPE about mfgtools

[nxpfrankli]

Does it work at windows environment? what's pid/vid after kernel boot

[zephray]

I am having similar issue, I am using kernel and initrd from L4.9.88_2.0.0_mfg-tool.tar.gz. After booting up the kernel, the pid/vid are 066f:37ff, which is not supported by uuu by default. I added 066f:377f to the list in config.cpp and recompile. I get the same [Bulk(R):LIBUSB_ERROR_PIPE ] if I try to use FBK command.
OS: Ubuntu 18.04 LTS on physical machine. SDP works fine.

[nxpfrankli]

uuu is not compatible old mfgtools initramfs. You should take one from at least 4.14 GA.

[zephray]

Thanks for the clarification. Is 4.14 GA released yet? I couldn’t seem to find it on NXP i.MX Linux BSP page.

[nxpfrankli]

https://www.nxp.com/design/software/embedded-software/linux-software-and-development-tools/embedded-linux-for-i.mx-applications-processors:IMXLINUX?tab=Design_Tools_Tab

click "more" under BSP, Drivers and Middleware

[zephray]

Thanks, after switching to 4.14 GA, it works fine now.