always show "To address is empty" about nkn-tunnel

[yilunzhang]

Seems that there is no reference of how to generate seed and pubkey at all？

If you don't provide a seed, it's automatically generated.

I've tried to run this on server side sudo ./nkn-tunnel -to 127.0.0.1:8080

it gives nothing, sometimes show 'connection nkn.ntunnel.org:30xx failed' etc...

If you use the latest release, you need to add -v to see listening address. In the latest master version, we have changed to always print listening address like

Listening at xxx

[Axaxin]

Seems that there is no reference of how to generate seed and pubkey at all？

If you don't provide a seed, it's automatically generated.

I've tried to run this on server side sudo ./nkn-tunnel -to 127.0.0.1:8080
it gives nothing, sometimes show 'connection nkn.ntunnel.org:30xx failed' etc...

If you use the latest release, you need to add -v to see listening address. In the latest master version, we have changed to always print listening address like

Listening at xxx

figure out finally, thanks a lot

[yilunzhang]

Is this the "client" or "server" side of the tunnel? Have you checked the basic usage section in the readme?

[98Kstar]

Is this the "client" or "server" side of the tunnel? Have you checked the basic usage section in the readme?

唉？老哥？国内的啊？是这样的，我是按照那个readme里的要求填写生成的，key也出来了，我的service是mac的一个内网地址，client是尝试过使用同内网ip段的另外一台虚拟机跟一台vps，在指定了我mac的key之后总是显示 address is empty，后来多次尝试之后又client端又是卡住啥回显都没有，mac这边也没接收到回话。

[yilunzhang]

你能把你在 client 端和 server 端执行的命令发一下嘛？我看看是哪里的问题

[98Kstar]

service 我用过./nkn-tunnel -from nkn -to 127.0.0.1:443 -v；./nkn-tunnel -from nkn -to 0.0.0.0:443 -v；/nkn-tunnel -to 127.0.0.1:8080 -v 都用过， client 就是直接 nkn-tunnel.exe -from 127.0.0.1:4444 -to xxxxxxx 我vps上面的4444端口是打开的。

[yilunzhang]

你会不会是开启了中文输入法导致输入了中文的-？To address is empty 这个错误只有在完全没有传入 -to 参数的情况下才会出现

[98Kstar]

好的，我试试，谢谢师傅。

[Axaxin]

Seems that there is no reference of how to generate seed and pubkey at all？

I've tried to run this on server side
sudo ./nkn-tunnel -to 127.0.0.1:8080

it gives nothing, sometimes show 'connection nkn.ntunnel.org:30xx failed' etc...