[2.7] connection to pump get lost (#72) didn't solve problem about androidaps

[MilosKozak]

all i can say is that pump hangs during bolus and never disconnect from phone.
It's not clear if the problem is on RS or Android side but AAPS cannot resolve this situation.
Try another phone or pump
Anyway I added disconnect from Android side in this situation fd934fd

[MilosKozak]

turn off sensitivity logging if you don't needed. it's too verbose

[MilosKozak]

the problem happened before this log

[thomasmenges]

@MilosKozak
"the problem happened before this log". Yes that's the problem. Normally in the night you will not recognize that AAPS isn't working well and when you recognize the problem the issue was earlier than the logfile.

Yes you're right. Solving the problem by fighting against the triggers is the best way but sometimes a medicine that covers a problem could also be helpful.

Normally I would assume that AAPs should know how long AAPS is waiting for a result of the pump (TBR and / or SMB). Is the time linger than 360 sec why can't AAPS being restsrtet automatically and the problem is solved as soon as the new BG is delivered?

By the way attached you can find a new log. Please look at the time range 16:12 to 16:17. Thanks in advance.

Thomas

AndroidAPS_LOG_1607440623166.log.zip

[febe20]

@thomasmenges Hi Thomas, sadly i have the exact same problem. The only difference is that i use a Pixel 5 with Android 11. Did you find any solution or workaround yet? The 2.7.2 dev does not work for me either.

[thomasmenges]

Hi @febe20,
good to know that not only me have the problems.

The problems aren't solved and occur 2 or 3 times a day. I'm really frustrated because the problem leads to bad BG values.

One thing can also be seen then the problem is alive.
A new connection to the DANA RS pump isnt't done anymore. Normaly you see on the pump that a bluetooth connection is on. But then the problem in AAPS occurs nothing is sent to the pump anymore.

And an other point I could see. Sometimes AAPS wants to send a temp basal change or a SMB to the pump and the result of the pump is 'false'. I do not know why the pump refuses to change temporarily the basal rate.
Perhaps that can lead to the problem in this issue.

[classchneider]

I am experiencing the same problem.

It is potentially unhealthy/dangerous when AndroidAPS for hours does not react on low/high BG, so a temporary fix as the one recommended by thomasmenges above should be implemented.

[thomasmenges]

Hi @MilosKozak,
your mentioned changes in situation fd934fd solves the problem. So I'm using the DEV version and I'm lucky. Thanks

[febe20]

@thomasmenges @MilosKozak Sadly its not working for me. Im sure now that everything has to do with my up-to-date Pixel 5 Android 11. All my Problems started after the new "Pixel Feature Drop"-Update in early dec 2020. damn

[classchneider]

Thanks for advice. I am looking into buying another phone. By the way, I am using OmniPod Eros pump - your disconnect correction mentioned above, is that only for danaPump? In case your commit also applies for my pump, can you help med with a link to the version to build? Den søn. 3. jan. 2021 kl. 18.02 skrev Milos Kozak <[email protected]

…

: all i can say is that pump hangs during bolus and never disconnect from phone. It's not clear if the problem is on RS or Android side but AAPS cannot resolve this situation. Try another phone or pump Anyway I added disconnect from Android side in this situation fd934fd <fd934fd> — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#97 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AHTRWEJP5HICXBS5SP6EIETSYCPJVANCNFSM4UOPA5RA> .