No gpu devices was detected about nanominer

[kirsuvin]

Found a solution. After reboot without monitor plugged in, go to the device manager, enable 'show hidden devices' and remove 'intel hd graphics' with drivers. After that miner is able to detect all devices.
*issue is still actual in 1.11

[Chelbee]

Hi i just installed NM windows v3.1.4 it says detected 0 devices. What should i do?

[Grumpy-Dwarf]

What is output of clinfo command on your system? Does it show AMD Vega card among other OpenCL devices?

[Ouzelot]

I have the same problem with my GTX 650, even though I have the latest driver.

[Grumpy-Dwarf]

There are lots of reasons for GPU devices to be invisible for miner. For AMD we need to check clinfo command output for GPU devices available. For Nvidia there is nvidia-smi in C:\Program Files\NVIDIA Corporation\NVSMI.
Please provide the output of clinfo for AMD case or output of nvidia-smi for Nvidia case so we can investigate the problem.

[Grumpy-Dwarf]

We've reproduced and fixed AMD devices detection issue in latest nanominer v1.0.7 release, hope this fixes the issue. Thanks for reporting.

[falantar]

I have the same problem with my RX 580's. It works fine when I have my monitor plugged into my onboard video, but when i reboot the machine without a monitor plugged and teamviewer in, i get this same error.

[cbarryb]

I have same problem. I have GEFORCE GTX 1070Ti GPUs, but get same error. Updated drivers and rebooted, buy still no bueno.

Suggestions?

[Grumpy-Dwarf]

I have same problem. I have GEFORCE GTX 1070Ti GPUs, but get same error. Updated drivers and rebooted, buy still no bueno.

Suggestions?

Do you have SLI enabled like in this issue FinMiner/FinMiner#7 ?

[szkotzky]

Can anybody tell me step by step how to fix that problem? I am new and I got Nvidia GeForce 1080Ti and same problem. Please Help !!!!

[lomadapraveenreddy]

can anyone help me how to solve this problem?

[PoopieFace]

I had this problem solved by updating drivers to latest.

[ashrafmoh]

Hi, I have same problem. I have Intel Hd Graphics 4000. I have Updated drivers and rebooted, but still show me the error.
Any help please !

[Grumpy-Dwarf]

Sorry only Nvidia and AMD GPUs are supported. You can mine Monero or Pascal however on your CPU with nanominer.

[ashrafmoh]

OK Thank you very much

…

On Tue, May 19, 2020 at 1:38 PM Grumpy Dwarf ***@***.***> wrote: Sorry only Nvidia and AMD GPUs are supported. You can mine Monero or Pascal however on your CPU with nanominer. — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#2 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ALMI2AYHUYN2OLZNUHACGPLRSKDU7ANCNFSM4GPUKYVA> .

[mhdfarouk]

hello please help me i have this issue in my laptop

no gpu devices were detected exiting

attached clinfo for AMD case or output of nvidia-smi

nvidia-smi.1.pdf

[Grumpy-Dwarf]

@mhdfarouk You've attached nvidia-smi man page, not nvidia-smi command output.
First of all, what OS and GPU model do you have?

[mhdfarouk]

hello dear and thanks for quick reply
as i understand what you request kindly see below information if not right please explain to me what you want and how i can provide u
Intel(R) HD Graphics 3000

Generic PnP Monitor

PC is ASUSTeK Computer Inc. N43SL

64 pit

also attached p. screan from nvidia-smi

[Grumpy-Dwarf]

Looks like ASUS N43SL2 has NVIDIA GeForce GT 540M GPU with only 1 GB of memory. I'm not sure why it is not shown in nvidia-smi. Maybe discrete GPU is disabled while Intel GPU works. Anyway, I'm afraid this configuration is not capable to mine any Ethash or Kawpow coin on GPU because all of them need more than 1 GB of GPU memory. 2 GB at least for UBQ and new Ethash coins and 4 GB or more for ETC and ETH.
You can mine Monero or Pascal however with nanominer on your CPU. But please note laptop cooling system was not designed for such intensive tasks as mining for days.

[NeerajShyamSundar]

[NeerajShyamSundar]

I'm getting this even after updating my drivers and rebooting my system.

[NeerajShyamSundar]

I've uploaded my nvidea.smi screen.

[rubensalves]

Found a solution. After reboot without monitor plugged in, go to the device manager, enable 'show hidden devices' and remove 'intel hd graphics' with drivers. After that miner is able to detect all devices.
*issue is still actual in 1.11

i tried that, but not work, thanks though.

i using am intel uhd graphics 620