ADT Pulse Night Mode in Home App vs Pulse App about homebridge-adt-pulse

[knedd]

There is an easy way to intergrate z wave devices. Get a SmartThings hub (very cheap), add all of your z wave devices and use the hombridge-SmartThings v2 plugin to connect the hub to HomeKit. Works like a charm for me. Kevin Sent via iPhone

…

On Jul 9, 2020, at 3:28 PM, tarunprakashsingh ***@***.***> wrote:  Hello Yes just figured it out... home= stay and i set automation to lock and stuff on arm night Too... Zwave devices dont show up... as mentioned in the doc too... wish there was a way to get them too.. But this is cool thanks for working on them. Thanks TS On Thu, Jul 9, 2020 at 3:25 PM Jacky Liang ***@***.***> wrote: > You can use the Homebridge plugin to Arm Away, Arm Stay, Arm Night and > Disarm. If you have ADT sensors, you can view those sensor statuses and set > automations for them. > > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub > <#32 (comment)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/AAFTGSICAJTMP7GF2UU4HBLR2YKQ3ANCNFSM4OVXXIPA> > . > -- Thanks Tarun Singh Like Us on Facebook CricketDepotOnline <http://www.facebook.com/CricketDepotOnline> Like Us on Facebook XTreme Cricket USA <http://www.facebook.com/XtremeCricketUSA> — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or unsubscribe.

[mrjackyliang]

It's not a bug. ADT only provides the night mode function by pressing the PIN + 3 + 3 keys on your keypad.

The platform (Icontrol, owned by Alarm.com) that ADT uses to host ADT Pulse has that feature connected already into our security systems.

No idea why, but I somehow guessed my way in to enable that feature for Homebridge users.

To use Night mode efficiently, you would need a technician to configure the sensors in your home.

[tarunprakashsingh]

Ok so basically it can only be used for disarming then.... cause if this is coming which i cant do by myself... thanks for helping out....

On Thu, Jul 9, 2020 at 1:04 PM Jacky Liang ***@***.***> wrote: It's not a bug. ADT only provides the night mode function by pressing the PIN + 3 + 3 keys on your keypad. The platform (Icontrol, owned by Alarm.com) that ADT uses to host ADT Pulse has that feature connected already into our security systems. No idea why, but I somehow guessed my way in to enable that feature for Homebridge users. To use Night mode efficiently, you would need a technician to configure the sensors in your home. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#32 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAFTGSNU6FH7CWNAANR7GZ3R2X2C7ANCNFSM4OVXXIPA> .

-- Thanks Tarun Singh Like Us on Facebook CricketDepotOnline <http://www.facebook.com/CricketDepotOnline> Like Us on Facebook XTreme Cricket USA <http://www.facebook.com/XtremeCricketUSA>

[mrjackyliang]

You can use the Homebridge plugin to Arm Away, Arm Stay, Arm Night and Disarm. If you have ADT sensors, you can view those sensor statuses and set automations for them.

[tarunprakashsingh]

Hello Yes just figured it out... home= stay and i set automation to lock and stuff on arm night Too... Zwave devices dont show up... as mentioned in the doc too... wish there was a way to get them too.. But this is cool thanks for working on them. Thanks TS

On Thu, Jul 9, 2020 at 3:25 PM Jacky Liang ***@***.***> wrote: You can use the Homebridge plugin to Arm Away, Arm Stay, Arm Night and Disarm. If you have ADT sensors, you can view those sensor statuses and set automations for them. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#32 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAFTGSICAJTMP7GF2UU4HBLR2YKQ3ANCNFSM4OVXXIPA> .

-- Thanks Tarun Singh Like Us on Facebook CricketDepotOnline <http://www.facebook.com/CricketDepotOnline> Like Us on Facebook XTreme Cricket USA <http://www.facebook.com/XtremeCricketUSA>

[mrjackyliang]

The plugin doesn't support Z-Wave devices because of incompatibility reasons. I mentioned it in the readme despite many still continue to ask about it.

Since Homebridge is a large community, it's easy to figure out an alternative and have the Z-Wave devices work through other means.

[tarunprakashsingh]

Ok i will try that.

On Thu, Jul 9, 2020 at 3:56 PM Kevin Nedd ***@***.***> wrote: There is an easy way to intergrate z wave devices. Get a SmartThings hub (very cheap), add all of your z wave devices and use the hombridge-SmartThings v2 plugin to connect the hub to HomeKit. Works like a charm for me. Kevin Sent via iPhone > On Jul 9, 2020, at 3:28 PM, tarunprakashsingh ***@***.***> wrote: > >  > Hello > Yes just figured it out... home= stay and i set automation to lock and > stuff on arm night Too... > Zwave devices dont show up... as mentioned in the doc too... wish there was > a way to get them too.. > But this is cool thanks for working on them. > Thanks > TS > > On Thu, Jul 9, 2020 at 3:25 PM Jacky Liang ***@***.***> wrote: > > > You can use the Homebridge plugin to Arm Away, Arm Stay, Arm Night and > > Disarm. If you have ADT sensors, you can view those sensor statuses and set > > automations for them. > > > > — > > You are receiving this because you authored the thread. > > Reply to this email directly, view it on GitHub > > < #32 (comment) >, > > or unsubscribe > > < https://github.com/notifications/unsubscribe-auth/AAFTGSICAJTMP7GF2UU4HBLR2YKQ3ANCNFSM4OVXXIPA > > > . > > > -- > Thanks > Tarun Singh > > Like Us on Facebook CricketDepotOnline > <http://www.facebook.com/CricketDepotOnline> > Like Us on Facebook XTreme Cricket USA > <http://www.facebook.com/XtremeCricketUSA> > — > You are receiving this because you are subscribed to this thread. > Reply to this email directly, view it on GitHub, or unsubscribe. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#32 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAFTGSPKIQQ276MF3MW4LHTR2YOILANCNFSM4OVXXIPA> .

-- Thanks Tarun Singh Like Us on Facebook CricketDepotOnline <http://www.facebook.com/CricketDepotOnline> Like Us on Facebook XTreme Cricket USA <http://www.facebook.com/XtremeCricketUSA>

[tarunprakashsingh]

Smartthings hub is v4? V3 is 70$ and v4 bestbuy 119$ i think... Sounds right??? On Thu, Jul 9, 2020 at 4:03 PM Tarun Singh <[email protected]> wrote:

Ok i will try that. On Thu, Jul 9, 2020 at 3:56 PM Kevin Nedd ***@***.***> wrote: > There is an easy way to intergrate z wave devices. Get a SmartThings hub > (very cheap), add all of your z wave devices and use the > hombridge-SmartThings v2 plugin to connect the hub to HomeKit. Works like a > charm for me. > > Kevin > > Sent via iPhone > > > On Jul 9, 2020, at 3:28 PM, tarunprakashsingh ***@***.***> > wrote: > > > >  > > Hello > > Yes just figured it out... home= stay and i set automation to lock and > > stuff on arm night Too... > > Zwave devices dont show up... as mentioned in the doc too... wish there > was > > a way to get them too.. > > But this is cool thanks for working on them. > > Thanks > > TS > > > > On Thu, Jul 9, 2020 at 3:25 PM Jacky Liang ***@***.***> > wrote: > > > > > You can use the Homebridge plugin to Arm Away, Arm Stay, Arm Night and > > > Disarm. If you have ADT sensors, you can view those sensor statuses > and set > > > automations for them. > > > > > > — > > > You are receiving this because you authored the thread. > > > Reply to this email directly, view it on GitHub > > > < > #32 (comment) > >, > > > or unsubscribe > > > < > https://github.com/notifications/unsubscribe-auth/AAFTGSICAJTMP7GF2UU4HBLR2YKQ3ANCNFSM4OVXXIPA > > > > > . > > > > > -- > > Thanks > > Tarun Singh > > > > Like Us on Facebook CricketDepotOnline > > <http://www.facebook.com/CricketDepotOnline> > > Like Us on Facebook XTreme Cricket USA > > <http://www.facebook.com/XtremeCricketUSA> > > — > > You are receiving this because you are subscribed to this thread. > > Reply to this email directly, view it on GitHub, or unsubscribe. > > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub > <#32 (comment)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/AAFTGSPKIQQ276MF3MW4LHTR2YOILANCNFSM4OVXXIPA> > . > -- Thanks Tarun Singh Like Us on Facebook CricketDepotOnline <http://www.facebook.com/CricketDepotOnline> Like Us on Facebook XTreme Cricket USA <http://www.facebook.com/XtremeCricketUSA>

-- Thanks Tarun Singh Like Us on Facebook CricketDepotOnline <http://www.facebook.com/CricketDepotOnline> Like Us on Facebook XTreme Cricket USA <http://www.facebook.com/XtremeCricketUSA>

[knedd]

I have V3 and it works fine. Kevin

…

Sent from my iPad

On Jul 9, 2020, at 4:14 PM, tarunprakashsingh ***@***.***> wrote:  Smartthings hub is v4? V3 is 70$ and v4 bestbuy 119$ i think... Sounds right??? On Thu, Jul 9, 2020 at 4:03 PM Tarun Singh ***@***.***> wrote: > Ok i will try that. > > On Thu, Jul 9, 2020 at 3:56 PM Kevin Nedd ***@***.***> > wrote: > >> There is an easy way to intergrate z wave devices. Get a SmartThings hub >> (very cheap), add all of your z wave devices and use the >> hombridge-SmartThings v2 plugin to connect the hub to HomeKit. Works like a >> charm for me. >> >> Kevin >> >> Sent via iPhone >> >> > On Jul 9, 2020, at 3:28 PM, tarunprakashsingh ***@***.***> >> wrote: >> > >> >  >> > Hello >> > Yes just figured it out... home= stay and i set automation to lock and >> > stuff on arm night Too... >> > Zwave devices dont show up... as mentioned in the doc too... wish there >> was >> > a way to get them too.. >> > But this is cool thanks for working on them. >> > Thanks >> > TS >> > >> > On Thu, Jul 9, 2020 at 3:25 PM Jacky Liang ***@***.***> >> wrote: >> > >> > > You can use the Homebridge plugin to Arm Away, Arm Stay, Arm Night and >> > > Disarm. If you have ADT sensors, you can view those sensor statuses >> and set >> > > automations for them. >> > > >> > > — >> > > You are receiving this because you authored the thread. >> > > Reply to this email directly, view it on GitHub >> > > < >> #32 (comment) >> >, >> > > or unsubscribe >> > > < >> https://github.com/notifications/unsubscribe-auth/AAFTGSICAJTMP7GF2UU4HBLR2YKQ3ANCNFSM4OVXXIPA >> > >> > > . >> > > >> > -- >> > Thanks >> > Tarun Singh >> > >> > Like Us on Facebook CricketDepotOnline >> > <http://www.facebook.com/CricketDepotOnline> >> > Like Us on Facebook XTreme Cricket USA >> > <http://www.facebook.com/XtremeCricketUSA> >> > — >> > You are receiving this because you are subscribed to this thread. >> > Reply to this email directly, view it on GitHub, or unsubscribe. >> >> — >> You are receiving this because you authored the thread. >> Reply to this email directly, view it on GitHub >> <#32 (comment)>, >> or unsubscribe >> <https://github.com/notifications/unsubscribe-auth/AAFTGSPKIQQ276MF3MW4LHTR2YOILANCNFSM4OVXXIPA> >> . >> > -- > Thanks > Tarun Singh > > Like Us on Facebook CricketDepotOnline > <http://www.facebook.com/CricketDepotOnline> > Like Us on Facebook XTreme Cricket USA > <http://www.facebook.com/XtremeCricketUSA> > -- Thanks Tarun Singh Like Us on Facebook CricketDepotOnline <http://www.facebook.com/CricketDepotOnline> Like Us on Facebook XTreme Cricket USA <http://www.facebook.com/XtremeCricketUSA> — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.