Comments (8)
If you get thru all the steps and nothing happens you probably brick or burn your arduino.
Here it goes the list of steps at the link:
Here are some easy things that can often fix this error:
Disconnect and reconnect the USB cable.
Press the reset button on the board.
Restart the Arduino IDE.
Make sure you select the right board in Tools ► Board ►, e.g. If you are using the Duemilanove 328, select that instead of Duemilanove 128. The board should say what version it is on the microchip.
Make sure you selected the right port in Tools ► Serial Port ►. One way to figure out which port it is on is by following these steps:
Disconnect the USB cable.
Go to Tools ► Serial Port ► and see which ports are listed (e.g. COM4 COM5 COM14).
Reconnect the USB cable.
Go back to Tools ► Serial Port ►, and see which port appeared that wasn't there before.
Make sure digital pins 0 and 1 do not have any parts connected, including any shields.
If none of those work, you will want to try to isolate the issue by replacing things: try a different computer on the same arduino, try a different arduino on the same computer, and try using a different USB cable.
If the issue is with the computer:
Double-check all computer-related issues in the "easy fixes" list above.
Reinstall the IDE.
Reinstall the drivers.
If the issue is with the Arduino:
Double-check all board-related issues in the "easy fixes" list above.
Make sure the microcontroller is seated correctly.
You may need to [burn the bootloader](https://arduino.stackexchange.com/a/474/37).
Replace the microcontroller if you have another one handy nearby.
You may have bricked your Arduino. Sorry :(
from aciduino.
hey ssid!
sure, i will workout a install guide on README.md file soon, i will let you know when done.
But in short you need to:
- Install Arduino environment IDE.
- Download latest release of aciduino zip file here: https://github.com/midilab/aciduino/releases
- Unzip/Untar the release file and using Arduino IDE open the file aciduino-1.2.0/Aciduino/Aciduino.ino
- With your board connected to PC and configured accorddly on Arduino IDE, press Sent button and wait untill you get a success message that the code was uploaded.
from aciduino.
Thanks! And excellent work you have done btw.
Actually, I downloaded all the stuff at the beginning. I uploaded the code to the nano and there's something that goes wrong.
Here is the specific information:
from aciduino.
What is you operational system?
Normally this error occur when there is some sort of miss configuration between you PC and arduino communication.
Try the steps in here and see if you can get it work:
https://arduino.stackexchange.com/questions/17/avrdude-stk500-getsync-not-in-sync-resp-0x00-aka-some-dude-named-avr-won
from aciduino.
I'm using Mac OS system.
Is it because I connected pins 0 and 1? (I use the PCB broad and solder them all.)
from aciduino.
its hard to tell without more background info.
did you get any change on behaviour following those steps at stackexchange?
from aciduino.
No, I don't think there's anything changed after I reset, reconnect and restart the IDE.
I'll try to reinstall the IDE and drivers tomorrow,let's see if it's gonna work.
from aciduino.
Closing by inactivity
from aciduino.
Related Issues (20)
- UONE presentation ? HOT 1
- Aciduino v2 build question HOT 30
- V2 Beta 05 Navigation issue HOT 2
- CC motion track HOT 1
- System Freeze in Seqr Page 2 HOT 3
- Seqr Page V2Beta10 HOT 1
- ESP32s2 HOT 4
- Nano HOT 5
- Software installation tutorial HOT 1
- .
- Encoder acceleration HOT 6
- Where is the audio output scheme? HOT 2
- Step sequencer button/led array support HOT 1
- Compilation errors for Teensy 3.2 HOT 3
- unable to compile with the Arduino-IDE HOT 25
- V2 MidiExternalSync HOT 1
- USB-MIDI settings HOT 5
- Aciduino V1 in Leonardo HOT 5
- 3D printed Case HOT 4
- Audi out HOT 4
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from aciduino.