Camera Led not working about dietpi

[MichaIng]

Did you reboot after changing the setting? If so, can you show the output of the following command:

vcgencmd get_config disable_camera_led

And just in case: You so see the camera actually recording with some software? The LED is intended to turn on only while recording.

[mrfoxie]

Did you reboot after changing the setting? If so, can you show the output of the following command:

vcgencmd get_config disable_camera_led

And just in case: You so see the camera actually recording with some software? The LED is intended to turn on only while recording.

yes i rebooted my pi

[Server:~]                                         
[root]# vcgencmd get_config disable_camera_led
disable_camera_led=0

this is the result of output of the command and im using motioneye to record a video but nope not working

[MichaIng]

Then I don't know either. Does it work with Bullseye (legacy) RPi OS? We are using the exact same kernel/firmware/bootloader, so whatever works in RPi OS should work in DietPi as well, and the other way round.

[mrfoxie]

currently in mine it is bookworm does it affect in that?

root in ~ λ cat /etc/os-release
PRETTY_NAME="Raspbian GNU/Linux 12 (bookworm)"     NAME="Raspbian GNU/Linux"
VERSION_ID="12"
VERSION="12 (bookworm)"                            VERSION_CODENAME=bookworm
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

[MichaIng]

Not Bullseye vs Bookworm is relevant, but whether the older raspberrypi-kernel kernel is used (which our images provide) or the newer raspi-firmware package stack, which still require some development our end to be nicely supported: #6676

In case of RPi OS, the "legacy" Bullseye images come with the old package stack, and RPi OS Bookworm with the new one. The Debian version itself is however generally independent of the underlying kernel/firmware.

[mrfoxie]

okay no problem, than i will be buying raspberry pi 0 w then🥹😊

[MichaIng]

Referencing your issue at the RPi firmware repo: raspberrypi/firmware#1890

Weird that there is an LED, if it is not controlled by any modern RPi, without this being documented anywhere. You could configure an own GPIO to control it, but quite a hassle for something that should implicitly work as a basic privacy feature of any camera, without the ability to manipulate it with custom GPIO, IMO.