Internal Pull up error mega328 about minicore

[MCUdude]

Please share your test code, and I'll try it on a board.

[ecvary]

Please share your test code, and I'll try it on a board.

``
#define p2 2
#define p3 3
#define p4 4
#define p5 5
#define p6 6
#define p7 7
#define p8 8
#define p9 9
#define p10 10
#define p11 11
#define p12 12

#define pA0 A0
#define pA1 A1
#define pA2 A2
#define pA3 A3
#define pA4 A4
#define pA5 A5
#define pA6 A6
#define pA7 A7

#define led 13

void setup() {
delay(1000);
pinMode(p2, INPUT_PULLUP);
pinMode(p3, INPUT_PULLUP);
pinMode(p4, INPUT_PULLUP);
pinMode(p5, INPUT_PULLUP);
pinMode(p6, INPUT_PULLUP);
pinMode(p7, INPUT_PULLUP);
pinMode(p8, INPUT_PULLUP);
pinMode(p9, INPUT_PULLUP);
pinMode(p10, INPUT_PULLUP);
pinMode(p11, INPUT_PULLUP);
pinMode(p12, INPUT_PULLUP);

pinMode(pA0, INPUT);
pinMode(pA1, INPUT);
pinMode(pA2, INPUT);
pinMode(pA3, INPUT);
pinMode(pA4, INPUT);
pinMode(pA5, INPUT);
pinMode(pA6, INPUT);
pinMode(pA7, INPUT);

pinMode(led, OUTPUT);
digitalWrite(led, LOW);

Serial.begin(9600);
}

void loop() {

int p2P = digitalRead(p2);
int p3P = digitalRead(p3);
int p4P = digitalRead(p4);
int p5P = digitalRead(p5);
int p6P = digitalRead(p6);
int p7P = digitalRead(p7);
int p8P = digitalRead(p8);
int p9P = digitalRead(p9);
int p10P = digitalRead(p10);
int p11P = digitalRead(p11);
int p12P = digitalRead(p12);

int pA0P = analogRead(pA0);
int pA1P = analogRead(pA1);
int pA2P = analogRead(pA2);
int pA3P = analogRead(pA3);
int pA4P = analogRead(pA4);
int pA5P = analogRead(pA5);
int pA6P = analogRead(pA6);
int pA7P = analogRead(pA7);

Serial.print(p2P);
Serial.print(p3P);
Serial.print(p4P);
Serial.print(p5P);
Serial.print(p6P);
Serial.print(p7P);
Serial.print(p8P);
Serial.print(p9P);
Serial.print(p10P);
Serial.print(p11P);
Serial.println(p12P);
delay(100);

}

[ecvary]

All work when i remove analog test from sketch.
Thanks for respons.