maslowcommunitygarden,github

-quot-calibration-free-quot-laser-cut-motor-mounting-bars

Two 6 ft long bars with coupler and laser cut holes to mount the motors 10' or 12' apart

18-quot-wok-holder

A wok holder that hangs on the wall and holds 1 wok. Says "WOK" in Chinese on front.

1990-volvo-240-radio-insert

The insert which holds the radio in place in a 1990 Volvo 240

3-bit-cnc-starter-pack

3 Bit starter pack

3d-printed-chain-guide-and-locking-pin

As Advertised

3d-printed-chain-guides

A 3D printed solution to chain wrapping

3d-printed-linkage

3D Printed Sled Linkage System

3d-printed-router-bit-holder-for-peg-board

Printing this piece will allow you to mount your bits in their case to a peg board

3d-printed-router-clamps-for-metalmaslow

90, 70, 65, 55mm router clamps

60-and-90-degree-v-groove-bit

CNC V-groove 60 and 90 degree combo bit

a-simple-night-stand

A simple open source night stand

arduino-plug

Cap to cover the Arduino Power port so you can only plug power into the correct port on the Maslow shield.

arduino-shield-v1.2

The Maslow Arduino shield version 1.2b

baby-yoda

Baby Yoda

basic-box

Just a basic box

big-z-value-display

Be able to see the current Z value of your maslow from all over the workshop

biplane

Child's ride on Biplane

bolt-together-maslow-frame

Bar's bolt together Maslow frame design

bosch-pof1200-top-mount

The part that connects the motor with the router

brad-s-3d-printed-chain-guide

A 3D printed chain guide to help prevent chain skip.

bucket-stand-

Stand that holds a bucket or flower pot or anything else that is about 10.5 inches and tapered

carriage-brackets

One pair of Sled Ring Bearing Carriages. To hold bearings as the roll along sled rings. Bearings and through bolt set sold separately.

cat-house

Interlocking skeleton cat house made of 10 mm plywood

chain-guide

A chain guide to increase chain engagement with the sprocket on the original frame

chain-guide-and-peeler

Combination chain guide and peeler for motor sprockets.

christmas---grinch-family---cindy-lou-who

This is a Christmas Yard Art project. It is a 2 tool setup that is first drawn with the marker holder and then with the router (1/4 in bit).

christmas---grinch-family---grinch

This is a Christmas Yard Art project. It is a 2 tool setup that is first drawn with the marker holder and then with the router (1/4 in bit).

christmas---grinch-family---max

Max is 36 inches tall and is designed to use the maslow to draw the inside features and the router to cut him out.

clamp-for-dust-hose-2.75-in-72.489-mm-

Clamp for dust hose made with 3/8 inch ply.

clamp-z-axis-ridgid

Clamp-Ridgid R22002

maslowcommunitygarden Goto Github PK

maslowcommunitygarden's Projects

Recommend Projects

Recommend Topics

Recommend Org