OTA about paradoxrs232tomqtt

[maragelis]

just turn off you wifi router the AP will come up and you can change the mqtt server

[FigJam23]

{"mqtt_server":"192.168.2.230","mqtt_port":"1883"}*WM: Adding parameter
*WM: server
*WM: Adding parameter
*WM: port
*WM: 
*WM: AutoConnect
*WM: Connecting as wifi client...
*WM: Custom STA IP/GW/Subnet
*WM: 192.168.1.98
*WM: Already connected. Bailing out.
*WM: IP Address:
*WM: 192.168.1.98

C:\Users\mydak>ping 192.168.1.98

Pinging 192.168.1.98 with 32 bytes of data:
Reply from 192.168.1.98: bytes=32 time=6ms TTL=255
Reply from 192.168.1.98: bytes=32 time=2ms TTL=255
Reply from 192.168.1.98: bytes=32 time=246ms TTL=255
Reply from 192.168.1.98: bytes=32 time=3ms TTL=255

[FigJam23]

Also I noticed the mqtt ip hasn't changed from 192.168.2.230 to my 192.168.197 server.
I've tried changing it in code then uploading it but it won't change I can't access web page to change it either seems very weird please help

[FigJam23]

⸮Dp⸮tAhlE⸮⸮CXH⸮⸮{"mqtt_server":"192.168.1.197","mqtt_port":"1883"}*WM: Adding parameter
*WM: server
*WM: Adding parameter

*WM: port
*WM:
*WM: AutoConnect
*WM: Connecting as wifi client...
*WM: Custom STA IP/GW/Subnet
*WM: 192.168.1.98
*WM: Already connected. Bailing out.
*WM: IP Address:
*WM: 192.168.1.98

blanked the flash of d1min and reloaded and config properly but this is my output via serial mon.
d1 mini is connected to paradox serial port as well rx and tx are correctly reversed.

[maragelis]

Use arduino core 2.3.0 and you should be ok. Had those issues with 2.4

[FigJam23]

Hi thanks for reply , I'm a bit new to Arduino so to change the Arduino core to 2.3.0 do I do that I the library update section . Sorry to ask such a noobish question. Get Outlook for Android<https://aka.ms/ghei36>

…

________________________________ From: Panagiotis <[email protected]> Sent: Monday, December 24, 2018 8:59:13 PM To: maragelis/ParadoxRs232toMqtt Cc: mydakota; Author Subject: Re: [maragelis/ParadoxRs232toMqtt] OTA (#19) Use arduino core 2.3.0 and you should be ok. Had those issues with 2.4 — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<#19 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AcB8WijuLARHOGd8gRqnHUa2R9dG_WiBks5u8IlRgaJpZM4Zf-GP>.

[SauRoNZA]

Use arduino core 2.3.0 and you should be ok. Had those issues with 2.4

Does that fix the problem with not having access to the web interface once it's connected to Wifi? Or is that the standard behaviour?

[maragelis]

There is no web interface

[FigJam23]

Ok I've change core files still the same but sounds like from what maragelis says theres no web interface . And the only work around to fix the incorrect mqtt Ip address was to reflash the esp with a blank.bin otherwise it would just rember the old changes . So far I've had no indication of comms between my paradox board and esp but ATM I'm running with out a keypad so maybe a issue . I'll have to wait untill I can pick up a keypad for testing . Thanks for all the help and getting me on the correct core files big help ....

[FigJam23]

Omg brilliant that works thanks lol